6845 - Overview
Models starting with 6845
Click on the best match to narrow your results.
- 6845 (Type 1) Makita Screwdriver (Screwdriver)
- 6845 (Type 2) Makita Screwdriver (Screwdriver)
- 6845-00 Briggs and Stratton Heater (6845-00 - Fuel Regulator Heater)
- 68458547 Admiral Range (Admiral Range/Stove/Oven Model 68458547 Parts)
- 6845L (Type 1) Makita Screwdriver (Screwdriver)
- 6845L (Type 2) Makita Screwdriver (Screwdriver)
Keep searches simple, eg. "belt" or "pump".
Oven Bake Element
PartSelect #: PS11744014
Manufacturer #: WP74003019
This is a 2800 watt, 240-volt Whirlpool oven bake element that is sourced directly from the original manufacturer for stoves, ovens, cooktops, or range ovens. This part should be replaced if the eleme...
$51.61
In Stock
6 Inch Element with Limiter
PartSelect #: PS11764912
Manufacturer #: W10823704
This element can be used for the left front or right rear.
$137.75
In Stock
Infinite Switch - 6 Inch
PartSelect #: PS11744486
Manufacturer #: WP7403P238-60
Does your appliance need a quick fix? Our GE Controller Assembly is here to help. This genuine GE part is the heartbeat of your appliance, keeping everything running smoothly and efficiently. It's spe...
$46.34
In Stock
Surface Element
PartSelect #: PS11759487
Manufacturer #: W10823707
This Whirlpool surface element, known as ELMNT-SURF, is specifically designed for the smoothtop range. This 8" element comes with a built-in overheat limit switch, ensuring that it delivers heat safel...
$142.32
In Stock
Power Cord
PartSelect #: PS10153834
Manufacturer #: 664064-4
Length 8 Foot
Length: 6'
Gauge: 18
Wires: 2
Type: Bare Wire
This power supply cord is a genuine OEM sourced replacement part. It is specially made to supply power from a standard outlet to Ma...
$34.66
In Stock
Thermostat Knob
PartSelect #: PS2091833
Manufacturer #: 7731P082-60
This knob accepts a D-shaped shaft.
No Longer Available
Thermostat
PartSelect #: PS11744505
Manufacturer #: WP7404P105-60
This temperature sensor detects the temperature within the oven cavity.
No Longer Available
Exact Part matches for your search term
[Viewing 4 of 4]
Sprocket, 20 Teeth
This part number matches the current model number 6845
PartSelect #: PS9062082
Manufacturer #: 6845
No Longer Available
Canopy
This part number matches the current model number 6845
PartSelect #: PS12279641
Manufacturer #: 6845
No Longer Available
SUPPORT
This part number matches the current model number 6845
PartSelect #: PS17999635
Manufacturer #: 6845
$123.39
Special Order
ACC, KIT, FUEL RGLTR HEATER, K
This part number matches the current model number 6845
PartSelect #: PS18603299
Manufacturer #: 6845
$217.53
Special Order
Common Symptoms of models starting with 6845
[Viewing 5 of 5]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
burned in half
put the new element in the oven pushed wire onto connector on element held it up to match holes and put the screws back in, very easy to change. I really like the fast way I receive a part from you.
Parts Used:
-
mike from gold bar, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
544 of 548 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat - element had burst.
Unscrewed 2 screws holding terminal ends of the element in place. Eased the element out, until the two AC power wires were exposed. Pulled off the connectors from the element terminals (pretty tight fit - needed pliers to remove one of them).
Slipped the connectors onto the new element terminals, and eased the element back int ... Read more o the oven wall. Secured the element with the two screws removed previously, and that was pretty much all there was to it. Closed the circuit breakers, and the element tested OK.
Overall, a no-sweat job. One thing, though: I squeezed the oven connectors tight before pushing them back onto the new element. They had loosened up somewhat after pulling them off. A tight connection here seems pretty important, as arcing and corrosion could occur over time if they're too loose.
Slipped the connectors onto the new element terminals, and eased the element back int ... Read more o the oven wall. Secured the element with the two screws removed previously, and that was pretty much all there was to it. Closed the circuit breakers, and the element tested OK.
Overall, a no-sweat job. One thing, though: I squeezed the oven connectors tight before pushing them back onto the new element. They had loosened up somewhat after pulling them off. A tight connection here seems pretty important, as arcing and corrosion could occur over time if they're too loose.
Read less
Parts Used:
-
John from Marion, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
236 of 302 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
Before you touch anything unplug the range or trip the breaker. Pull the racks out of the oven, it gives more room to work. Remove the two screws that hold the element and pull the element out about 2-3". Disconnect the old element. Before you install the new element check the wire and the connectors for age and heat damage. If the connec
... Read more
tors are loose replace them (2 connectors @ $1.97 is better than a short in the oven). If the insulation on the wire is degraded (brittle, flaking, brown) consider changing out the wiring. This means opening up the back of the oven and that is another chapter. In most cases you can just re-connect to the replacement element and attach it back to the oven with the two screws. I ran the oven to 400 degrees to just check that everything was OK. Spent a couple extra minutes to check everything out and save yourself pain later.
Read less
Parts Used:
-
Glenn from Jupiter, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
132 of 195 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!