207RCX549 Hotpoint Range - Instructions

Avril from Wasilla, AK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

worn out gasket

Used a putty knife and dental pick to remove old gasket remnants and installed new gasket with putty knife and thumb pressure

Parts Used:

Silicone Door Gasket

Jon from Bishop, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Element burned into.

TURN POWER TO OVEN OFF AT POWER PANEL 1- Remove element: 2 screws ... cut wire at element because of burned area. 2- Crimp two new wire lug connectors onto wire and attach to new element with supplied screws. 3- Attach element to back of oven: 2 screws ... TURN POWER ON AGAIN AND TEST OVEN

Parts Used:

Bake Element

Erbin from Poquoson, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

dirty drip pans

My stove top is 35 yr old. & Lowes did not have drip pans that fit. these worked great & easier than cleaning the old ones. They just popped right in.

Parts Used:

ELAINE from MURFREESBORO, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Knob had broken off

My husband was able to easily remove and replace the switch and know with-in 15 minutes.

Parts Used:

Range Infinite Heat Switch Kit

DeeAnn from Clinton, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Old drip pans rusted out.

Range is 45 yrs old. New drip pans are different shape. This is only place which had them and VERY GOOD price. Delivery was quick, too!

Parts Used:

Joseph from San Antonio, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Needed to replace drip bowls & trim rings for hard to find older range top....

As easy as 1-2-3 !!! :) Lift up burners, place drip bowls down then trim rings, put burners down! Could not be faster or easier! :) I Could NOT find these parts ANYWHERE !!! :) After much aggravation, I was EXTREMELY happy to come across these parts at PartSelect, online! :) Thanks so much for the diagram, you made is sooooooo EASY to find the precise parts that I needed, now I can cook !!! :)

Parts Used:

Viola from Sacramento, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Drip pan replacement

Couldn't find drip pans locally that fit my stove. I came here by chance searching the internet and found the parts I needed and had them in my hands within a day or two!! Not a big parts repair story but excellent service and shipping!! Will buy from again when needed!

Parts Used:

Dave from West Hartford, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Drip pans were disgusting.

Just an easy replacement. Problem was, I couldn't find the parts. The service and turn-around was fabulous!

Parts Used:

Gerri from nashville, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Condo Had Very Old Drop In. Threw Away Drip Pans And Rings

Placed new ones on range. Exactly what I would do to wash them.

Parts Used:

Valerie from Ogden, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Threw away old parts!

Put bowl in and then slid rings around. Just like cleaning procedure. Easy. Thanks for your service.

Parts Used:

Valerie from Ogden, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

dirty drip pans and rim trims

Threw away the old ones after lifting burner rings. Put new parts in place.

Parts Used:

Anna from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

old stained drip bowls

I tried first to replace them, with a set I bought at a local hardware store. But they were too small. So I went on the internet, and found Part Select, and thanks to a very helpful guy, who made the extra effort to find the exact drip bowls, I now have a nice, shiny stove-top again. Installing them took two minutes... tilt the burners up, and slide them in. No problem.

Parts Used:

Peter J from Oceanside, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Original trim ring did not fit

I had an appliance guy replace a burner(Calrod unit)on my 47 year-old GE range, but he didn't tell me that the original trim ring wouldn't fit. I decided to look up on PartSelect to see if I could get one to fit the new burner, and I did! Fits perfectly......no tools needed.

Parts Used: