EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account
Back
Back
Back
Keep typing for more specific results...

Shop by Department

See All >
Appliance Parts & More Appliance Parts & More Lawn & Garden Parts Lawn & Garden Parts Heating & Cooling Parts Heating & Cooling Parts Power Tool Parts Power Tool Parts Patio & Yard Parts Patio & Yard Parts BBQ & Grill Parts BBQ & Grill Parts Small Appliance Parts Small Appliance Parts Help me find my model number Help me find my model number

Top Appliance Brands

See All >
Whirlpool Parts Whirlpool General Electric Parts General Electric Samsung Parts Samsung Frigidaire Parts Frigidaire

Top Lawn Equipment Brands

See All >
Toro Parts Toro Briggs and Stratton Parts Briggs & Stratton Husqvarna Parts Husqvarna Craftsman Parts Craftsman
Keep typing for more specific results...
Price Match Guarantee
Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty
Models > 16460-2 > Instructions

16460-2 General Electric Range - Instructions

All Instructions for the 16460-2
46 - 60 of 61
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
End Cap broke on oven door.
It was easy as pie. Just followed the instructions.
Parts Used:
Door Handle End Cap
  • Georgianna from Austin, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Plastic end caps for oven door handle brokr off
When the replacement parts came (only took 2 days). I lifted the door off. Removed the screws that held the tempered glass front on the rest of the door. Removed the screws holding the broken end caps Replaced one end cap, inserted the handle, and fitted the 2nd end cap to the handle and screwed it in place. Screwed the front of the door to the back and replaced the door on its hinges. Easy as pie, ....Easier!
Parts Used:
Door Handle End Cap
  • Ben from The Hills, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The door handle end caps did not fit on to the handle far enough. this caused the screw hole spread to be too wide, Also the new end caps had two nipples outside the bolt holes that the original brackets did not have.
The reason the brackets didn't go on to the handle far enough was there was a molding defect inside one of the brackets. After alot of scraping at the inside of the bracket and lightly tapping with a soft hammer I was able to get the defective bracket on so that the holes lined up to the mounting plate. As for the extra nipples I had two options. Either cut the nipples off or drill some holes in the metal plate that the brackets attach to. I chose the latter. I had to attach the brackets to the plate with extra long screws, reach in under the bracket with a scribe and mark the nipple location on the plate. Then I removed the handle and drilled two holes for each bracket. After some minor adjustments to the holes I was able to attach both brackets and reassemble the oven door.
Parts Used:
Door Handle End Cap
  • Michael from South Bend, WA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken oven door handle. Needed the brackets and screws to repair it.
removed the broken parts and screwed on the new parts.
Parts Used:
Door Handle End Cap
  • Margaret from Cogan Station, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken door handle
repair was easy and the video was very good. My only problem, I had to go buy a tool, I did not have a nut driver.
Parts Used:
Door Handle End Cap
  • Joan from Schererville, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
plastic sockets in end caps for connection screws broke off
Very detailed repair instructions on internet made installation of new end caps a job not needing a professioal.
Parts Used:
Door Handle End Cap
  • cornelius from Hollister, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
End cap plastic broke at screw entry
Removed door from oven. Removed all side screws and pulled front assembly from door. Discarded old screws and broken plastic pieces. Put old handle in new end caps and lined them up with screw entry holes. It took 2 people to hold the door up while pressing in the screws to enter the new plastic receivers on the end caps. A pretty easy fix.
Parts Used:
Door Handle End Cap
  • Alan from Mars, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Broken door handle
Pull door from oven and place on flat work surface. Remove bottom screws then the top screws and separate the two halves of the door . Remove broken door handles and replace reassemble door and place back on oven. The hardest thing was to clean the grease out of the inside of the door and get the glass clean to reassemble the door.
Parts Used:
Door Handle End Cap
  • John from Milan, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 16460-2
46 - 60 of 61
Back to Top