Maytag Washer Dryer Combo Ducts and Vents

Your Price

$72.00

Maytag Washer Dryer Combo Side And Bottom Vent Kit

★★★★★

2 Reviews

PartSelect Number PS3633049

Manufacturer Part Number W10470674

This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.

Installation Instructions

Mark from San Diego, CA

Needed to change rear exhaust to the side to fit dryer into my closet.

First, I opened up the front of the dryer and then unscrewed the entire back piece. I assembled the new exhaust piece from the kit. Next, I took out the old straight rear exhaust and then replaced it with the elbow shaped left eshaust from the kit. Lastly, reattache the back and front pieces of the dryer. Read more...

Your Price

$153.83

Maytag Washer Dryer Combo Duct-air

PartSelect Number PS11741422

Manufacturer Part Number WP3387911

Introducing the DUCT-AIR from the trusted brand Whirlpool. This is a genuine OEM piece that is designed to work compatibly with selected models of Whirlpool appliances. Key to your appliance's functionality, this DUCT-AIR facilitates the flow of warm air from the heater to the back of the dryer and into the drum, assuring efficient operation. Remember to unplug the dryer while installing this part and wear work gloves to ensure hand safety. This mastery engineered part is sure to be the exact fit you need, just be sure to verify its compatibility with your model before ordering. Choose Whirlpool for trusted, high-quality parts.

Fixes these symptoms

Marks left on clothes
See more...

Installation Instructions

Thomas from Edgartown, MA

Screen on the hot air vent disintegrated

It is odd that this part needed replacement but I am in an area near the Atlantic ocean in a vacation house which is vacant most of the year. The exhaust vent probably brings excessive moisture down to the dryer in the basement. The screen you can see at the inside back of the tumbler (where the heated air enters) rotten out, pieces fell inside and there was danger of something falling in and catching fire. I found no useful source for information (including YouTube) as this part is most easily replaced from the rear of the dryer and the available info was about repairing the heating element, the circuit board, or the exhaust venting pieces which is done from the front.

The bottom line is that the back removes easily. You should:
1. unplug and remove the exhaust shoot
2. remove the top per YouTube or other source
3. take off the back panel over the electrical connections and unscrew the ground; tuck it inside. Don't undo any electrical connections except the ground
4. take off the screws holding the back on (8-9, one is hidden above the exhaust vent) and pull it out of the way; you then have compete access to the "DUCT-AIR" part
4. undo the clip that holds the vent tube (from the heating element) to the part
5. remove the screws that hold the part to the inside back (3?) and push it out of the way
6. remove the clips and remove the old part
7. reassemble in reverse order

I'm over 70 so I took lots of time and breaks but was still done in under two hours. The 2 clips holding the heater element tube to the part were badly rusted and should have been replaced but I made do with the old ones. Read more...

Videos!

Your Price

$78.70

Maytag Washer Dryer Combo Blower Housing

PartSelect Number PS11741071

Manufacturer Part Number WP33001789

Upgrade your Whirlpool appliance with this genuine OEM blower housing, designed to offer consistent performance. Meticulously crafted, this essential component encapsulates and safeguards the blower fan wheel while improving the direction of airflow all through your dryer. Prioritize personal safety when installing this part by unplugging the dryer and donning work gloves to shield your hands. Remember to confirm that the part's size and shape are fitting for your particular model before placing an order. Experience diverse benefits with this Whirlpool blower housing- a seamless blend of precision and quality.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Terry from Caruthersville, MO

loud noise inside dryer

After changing all the rollers in the dryer (which didn't fix the problem) I decided to take apart the blower. Sure enough, that was the problem. As the dryer heated up, the damaged wheel would swell and start rubbing the housing. I replaced both and fixed the problem. The repair was pretty easy, since I had taken the dryer apart several times replacing the rollers. Read more...