Maytag Washer Dryer Combo Latches

Videos!

Your Price

$5.05

Maytag Washer Dryer Combo Door Catch Kit

★★★★★

125 Reviews

PartSelect Number PS334230

Manufacturer Part Number 279570

This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.

Fixes these symptoms

Door Pops Open
Door won’t close
Lid or door won’t close
See more...

Installation Instructions

Terri from Saint Augustine, FL

Door Catch part had fallen out,/ was missing

Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...

Videos!

Your Price

$12.20

Maytag Washer Dryer Combo Door Strike/Hook

★★★★★

13 Reviews

PartSelect Number PS11746261

Manufacturer Part Number WP8540221

Used to help make the door stay closed. Sold individually.

Fixes these symptoms

Door won’t close
Leaking
Lid or door won’t close
See more...

Installation Instructions

david from st petersburg, FL

the strike hook was broken

replacing the hook was simple 2 torx screws. the latch assembly seemed ok I could hear it trying to latch the hook so i just replace the broken hook. Read more...

Videos!

Your Price

$32.40

Maytag Washer Dryer Combo Door Catch Kit

★★★★★

20 Reviews

PartSelect Number PS2162263

Manufacturer Part Number LA-1003

This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Paul from Mt. Pleasant, SC

catch mounted on door broke

The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. Read more...

Videos!

Your Price

$13.72

Maytag Washer Dryer Combo Door Latch Kit

★★★★★

15 Reviews

PartSelect Number PS2029855

Manufacturer Part Number 306436

This is a door latch kit, but you may also know it as a door catch kit. It is designed for your dryer. This part helps hold the door shut on your appliance. This dryer door latch kit comes in two pieces: a door latch, and a door strike or clip. Both parts are a beige white color and made entirely of plastic. Together they are 2 inches wide, 1 inch long, and about 1 inch high. To replace the door latch kit, you will need a pair of needle-nose pliers and a number 2 Phillips screwdriver.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

gerry from west covina,, CA

noisy rollers, broken latch

first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you. Read more...

Videos!

Your Price

$11.08

Maytag Washer Dryer Combo Lid Strike

★★★★★

7 Reviews

PartSelect Number PS11741871

Manufacturer Part Number WP358684

This part is used to activate the lid switch when the lid opens/closes.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Fred from Midlothian, VA

Washing Machine kept cutting off mid-cycle

I had to remove the washing machine from the laundry room (our laundry room is pretty small).

I read the do-it-yourself explanation posted by Paul From Glendale CA and followed his instructions.

1. Unplugged the Washer and disconnected the hoses, so I could slide the washer into the kitchen.

2- Unfastened the two screws in the front lower corners of the controls panel and tilted is back. Unfastened the old lid-switch wiring from the control panel.

3. Remove the clips at the two corners under the control panel. I rotated the cover forward to clear it from the back and lifted it off and set it off to the side.

4. While I had the Washer disassembled I vacuumed out all the accumulation of dust, etc.

5. Removed the lid switch and unfastened the ground wire.

6. Installed the new switch and reassembled the Washer.

7. I did not read Paul's reassembly instructions closely enough. The front flange of the cover goes UNDER the steel frame on the washer. I spent 30 minutes trying to get the cover on, then finally figured that out on my own. Once I got the flange under the frame, it took about five minutes to get the cover on, the clips in and the control panel back into positions and reassembled.

The entire process is not particularly difficult. Had I read the "UNDER the frame" part earlier, the entire repair would have taken no more than 45 minutes.

Having another person to help reinstall the cover would be helpful. The cover is not heavy but it is a little awkward to handle and having another person to help line up the back cover, etc. will make the reassembly even easier. Read more...

Your Price

$11.12

Maytag Washer Dryer Combo Strike-Door

PartSelect Number PS11746578

Manufacturer Part Number WP8565122

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

John from Syracuse, NY

The door will not latch tightly.

I replaced both the door strike and the female portion. The door still does not close tightly. Heavy, wet items also knock the door open. Read more...

Videos!

Your Price

$8.02

Maytag Washer Dryer Combo Door Strike - male

★★★★★

4 Reviews

PartSelect Number PS11741066

Manufacturer Part Number WP33001761

This male door strike is just under an inch long. It is made of metal.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Carl from Livermore, CA

Broken door strike

Removed one screw and took out old broken door strike, replaced with new door strke and put screw back in. Only took two three days to get the part. The dryer is as good as new! Read more...