This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Will Not Start | Shuts off too soon | Will not shut off
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
November 25, 2017
Looking for dryer latch kit for Speed Queen dryer he5003w
For model number HE5003W
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS2162263. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stuart
May 13, 2019
Does this part fit this model or do you know the part number that does?
For model number 20E107
Hello Stuart, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sylvia
October 28, 2019
Maytag bravos, above model, serial # mw3006680. Broken female part of latch located in dryer door. What would be the part number please?
For model number MED6400TQ0
Hello Sylvia, thank you for inquiring. That would be the Door Catch, part number PS11748369 for your model dryer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 7, 2019
How to remove door strike and install door strike
For model number MDE9206AYW
Hi Mike, please watch our video here https://www.youtube.com/watch?v=i-9zZhKY02o. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
KEN
February 25, 2020
Dryer stops mid cycle. Press start button once and dryer completes cycle. Sometimes when i press start button dryer hums. If i turn the timer knob a little and then press start button it completes the cycle.
For model number LDE7334ACE
Hello and thank you for writing.
It certainly sounds like it could be a faulty door catch PS2162263 and door switch PS1964648 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. Also, you should make sure your timer itself PS11757529 is not loose with its connections. We hope this helps. Please contact us anytime if you require further assistance.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
catch mounted on door broke
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in.
Paul from Mt. Pleasant, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
92 of 119 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the door on the unit wouldn't stay closed
removed the dryer female part that was broken with needle nose pliers and inserted the new one, on the door i removed one phillips screw and r/r the male piece with the new one and re-inserted the screw. that was all, very easy repair
I just inserted the door catch, which by the way fit in perfectly. Thanks. Took 5 seconds to repair.
Inocencio from Edinburg, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
13 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old latch broke
I inserted the clip
Jim from Germantown, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
8 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer door latch was broken.
The replacement part just snapped into place. (The old part had fallen out) It took less than 30 seconds to do the repair.
Jack from Memphis, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door wasn't staying closed
popped up top of dryer -- With pliers squeezed clips on inside of latch - - with screw driver pryed latch out -- just pused new latch in.......... Thanks to parts select for sending part sooo fast.. wife was happy.. Thanks, Dale
Dale from Livingston, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Catch
Watch the video. Very, very easy
James from LARAMIE, WY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stay shut
Took off the four screws to get to the female clip and used pliers to squeeze it out. Next was using pliers to pinch out the male connector and place the new one in.
Eli from North Stonongton, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Female End Of The Door Catch Broke
First I put the square female end iof the door catch kit nto the square hole as snug as I could. Then I gently pushed the door against the piece until I heard it click in to place. That's it!! Sooooo simple--
Tara from North Canton, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The female catch in door was bro9ken
I took out the old worn out part and replaced with the one I order.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ken B - May 1, 2021
Verified Purchase
Worked as I expected
It worked perfectly. Would have been nice if I had known there was a duplicate one one the hinge side I could have had it up and running a week earlier
★★★★★
★★★★★
Herb W - April 7, 2021
Verified Purchase
part
was great and easy to install
★★★★★
★★★★★
Robert J - November 18, 2020
Verified Purchase
Easy to repair when you get the right parts which I did.
Dryer is working again. Fair price and quick delivery.
★★★★★
★★★★★
PAUL P - October 27, 2020
Verified Purchase
Easy repair.
Installation was easy, didn't need the male metal clip, existing plastic one works fine.
★★★★★
★★★★★
Kris W - September 6, 2020
Verified Purchase
Perfect fit
Perfect fit. Easy installation
★★★★★
★★★★★
Danielle B - May 14, 2020
Verified Purchase
Easy Repair
Ordering and shipping was easy and accurate. The part was exactly what I needed. I fixed my dryer door in less than 30 minutes.
★★★★★
★★★★★
Ana C - August 3, 2019
Verified Purchase
It fit perfectly
The part was exactly as it was described. It made machine new again.
★★★★★
★★★★★
Mike C - June 25, 2019
Verified Purchase
easy part to install
just as described
★★★★★
★★★★★
Glen J - September 13, 2018
Verified Purchase
easy repair
worked perfectly
★★★★★
★★★★★
LILLIAN S - September 7, 2018
Verified Purchase
Worked as expected
Part was in good condition & my appliance is back in working condition.
