Makita Miter Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Makita Miter Saw Parts
Your Price
$18.87
In Stock
Makita Miter Saw Carbon Brush Set
PartSelect Number PS10156641
Manufacturer Part Number CB154
This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric braking power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.
Your Price
$36.43
In Stock
Makita Miter Saw Power Tool Cord
PartSelect Number PS10153842
Manufacturer Part Number 664265-4
This power cord is for power tools.
Unplug the power tool before installing this part. Wear work gloves to protect your hands.
Your Price
$6.40
In Stock
Makita Miter Saw Switch Button
PartSelect Number PS10149734
Manufacturer Part Number 411478-6
This switch activator button is a genuine Makita replacement part, It is sold individually. It has to be pressed to activate the power switch. This is a very common replacement part. It is advised to order one or two extra to keep on hand. This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models.
Your Price
$44.60
In Stock
Makita Miter Saw Power Cord
PartSelect Number PS10153852
Manufacturer Part Number 664463-0
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 8 Feet Long
Your Price
$6.40
In Stock
Makita Miter Saw Cord Guard
PartSelect Number PS10153921
Manufacturer Part Number 682505-8
This cord guard / strain reliever is a genuine Makita replacement part. It covers the final portion of cord before entering the tool, providing extra rigidness and preventing cord damage. Over time these cord guards break down and require replacement. The guard is constructed of heavy duty rubber compound for toughness. This cord guard is compatible with the tools listed below. It is not guaranteed to fit any other power tool models.
Your Price
$24.08
In Stock
Makita Miter Saw Carbon Brush Set Cb-203
PartSelect Number PS10156645
Manufacturer Part Number CB203
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
Your Price
$10.67
In Stock
Makita Miter Saw Kerf Board
PartSelect Number PS10150110
Manufacturer Part Number 416001-2
Kerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf board for your tool can give a rough edge to the material you're cutting.
Your Price
$6.40
In Stock
Makita Miter Saw Torsion Spring 36
PartSelect Number PS10143140
Manufacturer Part Number 231593-8
This is a Genuine Manufacturer Sourced replacement part designed for use with Makita Miter Saws. It allows for the Guard to retract. This Torsion Spring is made out of Metal and it is sold individually. Replacing this item you would need a Screwdriver and Pliers.
Your Price
$11.24
In Stock
Your Price
$7.06
In Stock
Makita Miter Saw Kerf Board
PartSelect Number PS10151726
Manufacturer Part Number 451013-8
This is an authentic manufacturer sourced replacement part used on Makita compound miter saws. Kerf boards (also called kerf plates) are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf board for your tool can give a rough edge to the material you're cutting. This part is made out of plastic and it is sold individually. Screws that attach this part are sold separately.
Makita Miter Saw Appliance Types
Popular Makita Miter Saw Models
Below are the most popular Makita Miter Saw models we have. Enter your model number in the search box to find your model.
- LS1013 Miter Saw
- LS1016L 10" Dual Slide Compound Miter Saw
- LS1216L 12" Dual Slide Compound Miter Saw
- LS1221 Compound Miter Saw
- LS1011 Compound Miter Saw
- LS1030 Miter Saw
- LS1212 Miter Saw
- LS1220 Compound Miter Saw
- LS1040 Miter Saw
- LS1013FL Compound Miter Saw
- LS0815F 10" Slide Compound Miter Saw
- LS1211 Miter Saw
- LS1013L Compound Miter Saw
- LS1219LX 12 Inch Dual Bevel Sliding Compound Miter Saw
- LS1018 10" Slide Compound Miter Saw
- LS1016 Dual Bevel Slide Compound Miter Saw
- WST06 Compact Folding Miter Saw Stand
- LS1214FL 12" Dual Slide Compound Miter Saw
- LS1440 Miter Saw
- LS1020 Miter Saw