Lawn Mower Wheels and Rollers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Lawn Mower Wheels and Rollers
Your Price
$12.69
In Stock
Lawn Mower Wheel
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS12630280
Manufacturer Part Number 589527301
This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the deck while providing traction, preventing it from making direct contact with the ground during operation. This helps maintain an even cut and protects both the deck and the lawn. The gauge wheel is sold individually, so be sure to check your model’s specifications to determine the quantity needed.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$35.94
In Stock
Lawn Mower Wheel, 8 X 1.75, Mag2, Rad3, G
PartSelect Number PS16373269
Manufacturer Part Number 583719501
Facing issues with your GE Dryer's control console? Our GE Dryer Backsplash Panel Assembly is just the part you need to sort things out. You are probably asking what this part does. Well, it?s basically the 'brain' of your dryer. This is where the selection buttons and display are housed. The Backsplash Panel Assembly restores the optimal functioning of these key elements, helping your dryer work flawlessly, just like when it was new. Designed in a clean, crisp white finish, this part doesn't just work well?it looks great too, ensuring that your appliance maintains a sharp, coherent look. It also comes with detailed graphics, offering clear and easy-to-follow guidance. To guarantee a smooth and safe replacement process, remember to disconnect your dryer from the power before you begin. It's also a good idea to wear work gloves to ensure your hands are fully protected throughout. And you can trust the quality?this part reflects GE's commitment to offering durable and reliable products. Our Backsplash Panel Assembly is engineered for long-term use, ensuring that your dryer remains dependable for years to come. Note: While our GE Dryer Backsplash Panel Assembly is meticulously designed for a universal fit, we recommend verifying that it's compatible with your specific dryer model before purchasing. This way, we can best assure you will experience smooth sailing with your dryer upgrade. Trust us; your dryer will thank you for it!
Your Price
$30.12
On Order
Lawn Mower Wheel-gear 8-inch Inte
PartSelect Number PS19272260
Manufacturer Part Number 734-04018C
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside which is driven by the Right hand and Left hand smaller gear that attaches to the front axle on the transmission assembly.
Installation Instructions
Jay from GERRY, NY
Not the exact fit
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Read more...
Your Price
$26.94
In Stock
Lawn Mower Rear Wheel
PartSelect Number PS12092342
Manufacturer Part Number 42710-VE2-M02ZE
It is an authentic part that is supplied by the original equipment manufacturer for use with Honda lawn mowers. This is an identical replacement for a missing or faulty rear wheel that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. This high-quality wheel is made of durable plastic and is sold individually, keep in mind the hardware to secure it is sold separately.
Your Price
$21.16
In Stock
Lawn Mower Wheel Assembly
PartSelect Number PS12604789
Manufacturer Part Number 532403111
Lawn mower wheel assembly, Diameter: 8 inches. Width: 1.75 inches. If the lawn mower's self-propel function isn't working, the drive gear on the wheel might be stripped.
Your Price
$38.50
In Stock
Lawn Mower Wheel
PartSelect Number PS9016096
Manufacturer Part Number 532401274
This is a genuine Husqvarna replacement part, sold individually. Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower. A wrench is required for replacement of this part. This part is compatible with the Husqvarna lawn mower models that are listed below.
Installation Instructions
Russ from ALTENBURG, MO
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read more...
Your Price
$52.66
In Stock
Lawn Mower Axle Asm-rear 11
PartSelect Number PS16386134
Manufacturer Part Number 611-04144B
This authentic component is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. It is an identical replacement for a damaged or a missing rear axle assembly that was installed on a new unit. This is the part that the wheels are attached to. Refer to the diagrams of your model for the exact location and the correct installation of this component. Note, it is made of durable metal and is sold individually. You will need a wrench set and a screwdriver to remove the wheels, disconnect the old axle assembly and attach the new part.
Installation Instructions
Tim from SPOKANE VLY, WA
Broken adjustment lever
Placed on stands to hold mower up, then removed wheels and clips, then placed new axle in place and replaced clips and wheels.
Read more...
Your Price
$13.46
In Stock
Lawn Mower Front Wheel - Grip Gray
PartSelect Number PS12135571
Manufacturer Part Number 44710-VL0-L02ZB
This wheel is for lawn mowers.
Wear work gloves to protect your hands when installing this part
Your Price
$38.50
In Stock
Lawn Mower Line Trimmer Mow Ball
PartSelect Number PS9013718
Manufacturer Part Number 532182217
This is a manufacturer approved mow ball assembly used on some Wheeled Trimmers. Mow ball assembly prevents the trimmer from scalping the grass. This Assembly includes the Plastic Housing, Ball Bearing and a Retaining Ring. Please note Bolt used to attach this assembly is Sold Separately.
Your Price
$13.49
In Stock
Lawn Mower Caster
PartSelect Number PS11867132
Manufacturer Part Number 29823
Genuine Ridgid replacement part, this item is sold individually. The purpose of the 29823 Caster it to make the Vacuums shown below more mobile. To replace the Caster , pull on it and remove it from the Caster Foot, then just simply press the new caster back in.
Lawn Mower Wheel or Roller Brands
- Ariens Lawn Mower Wheels and Rollers
- Black and Decker Lawn Mower Wheels and Rollers
- Briggs and Stratton Lawn Mower Wheels and Rollers
- Craftsman Lawn Mower Wheels and Rollers
- Cub Cadet Lawn Mower Wheels and Rollers
- Exmark Lawn Mower Wheels and Rollers
- Honda Lawn Mower Wheels and Rollers
- Husky Lawn Mower Wheels and Rollers
- Husqvarna Lawn Mower Wheels and Rollers
- Jonsered Lawn Mower Wheels and Rollers
- Lawn Boy Lawn Mower Wheels and Rollers
- MTD Lawn Mower Wheels and Rollers
- Murray Lawn Mower Wheels and Rollers
- Poulan Lawn Mower Wheels and Rollers
- Simplicity Lawn Mower Wheels and Rollers
- Snapper Lawn Mower Wheels and Rollers
- Toro Lawn Mower Wheels and Rollers
- Troy-Bilt Lawn Mower Wheels and Rollers
- Weed Eater Lawn Mower Wheels and Rollers
- Worx Lawn Mower Wheels and Rollers
- Yard Machines Lawn Mower Wheels and Rollers
- Yard Man Lawn Mower Wheels and Rollers