Husqvarna Lawn Mower Wheels and Rollers
Popular Husqvarna Lawn Mower Wheels and Rollers
Husqvarna Lawn Mower Wheel and tire assembly (Front Drive Wheels)
PartSelect Number PS11971248
Manufacturer Part Number 583719501
This is a genuine OEM sourced replacement part is used with walk behind lawn mowers. This is the drive wheel which has plastic gears on the inside. It is designed to be driven by a pinion gear which is sold separately. If the wheel is broken or damaged it should be replaced to ensure smooth ride and consistent cut of the grass. Includes one (1) plastic wheel.
Husqvarna Lawn Mower Wheel
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS12630280
Manufacturer Part Number 589527301
Wheel.gage.half.spoked
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$35.21
In Stock
Husqvarna Lawn Mower Wheel
PartSelect Number PS9016096
Manufacturer Part Number 532401274
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower.
A wrench is required for replacement of this part.
Installation Instructions
Russ from ALTENBURG, MO
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socket. It was a very easy repair.
Read more...
Husqvarna Lawn Mower Wheel Gage Donut Wide
PartSelect Number PS9010538
Manufacturer Part Number 532133957
Husqvarna Lawn Mower Wheel
PartSelect Number PS9982085
Manufacturer Part Number 580365301
This replacement wheel is a genuine manufacturer sourced item that is specially produced for Husqvarna lawn mowers. This is the rear drive wheel that is driven by the transmission assembly. It is made from durable plastic and it is sold individually. Please note that the hardware to secure it, gears, and other parts are all sold separately.
Husqvarna Lawn Mower Wheel & Tire Assembly
PartSelect Number PS9015379
Manufacturer Part Number 532180775
Husqvarna Lawn Mower Wheel Adjuster Kit - RF/AWD
PartSelect Number PS11824351
Manufacturer Part Number 581497908
This part is used to move the mower deck up or down to the desired lawn mowing height.
Husqvarna Lawn Mower Wheel.11.rad3.460.bb2.new.husq
PartSelect Number PS12621881
Manufacturer Part Number 585265603
Related Husqvarna Lawn Mower Parts
- Husqvarna Lawn Mower Bearings
- Husqvarna Lawn Mower Belts
- Husqvarna Lawn Mower Blades
- Husqvarna Lawn Mower Brackets and Flanges
- Husqvarna Lawn Mower Caps and Lids
- Husqvarna Lawn Mower Deflectors and Chutes
- Husqvarna Lawn Mower Handles
- Husqvarna Lawn Mower Hardware
- Husqvarna Lawn Mower Hoses and Tubes
- Husqvarna Lawn Mower Knobs
- Husqvarna Lawn Mower Pulleys
- Husqvarna Lawn Mower Seals and Gaskets
- Husqvarna Lawn Mower Springs and Shock Absorbers
- Husqvarna Lawn Mower Switches
- Husqvarna Lawn Mower Transmissions and Clutches