Kenmore Washer Dryer Combo Legs and Feet

Videos!

Your Price

$6.40

Kenmore Washer Dryer Combo Leveling Foot

★★★★★

13 Reviews

PartSelect Number PS1609293

Manufacturer Part Number 49621

If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Bryan from west valley city, UT

dryer had no heat, all other functions worked

After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly Read more...

Videos!

Your Price

$6.40

Kenmore Washer Dryer Combo Washer Front Leveling Foot

★★★★★

5 Reviews

PartSelect Number PS11747965

Manufacturer Part Number WPW10001130

The front facing foot is sold individually. It is used on your washing machine and can also be known as an adjustable leveling leg. This specific front facing leveling leg has a rubber foot. It is important that when installing this part you are very careful, if not installed correctly your washer will be off balance which will then cause it to vibrate and/or shake during the cycle. The function of the adjustable foot is to keep your washing machine supported and to make sure that it is level at all times. The tools you will need for this repair include a pair of channel lock pliers, and a 9/16 wrench.

Fixes these symptoms

Shaking and Moving
See more...

Installation Instructions

Paddy from Ferndale, WA

Bearings went out in the drum.

purchased the bearings at Napa auto parts for 16$. Over all it was a little difficult to get the bearings out and back in. Used a brass drift to drive them out and to seat them back in.. Read more...

Your Price

$24.67

Kenmore Washer Dryer Combo Leveling Leg

PartSelect Number PS16731678

Manufacturer Part Number 5304532058

This leveling leg allows height adjustment to keep the appliance stable on uneven floors. Proper leveling reduces vibration and ensures correct operation. Replacing a damaged leg restores balance and stability.

Videos!

Your Price

$23.49

Kenmore Washer Dryer Combo Screw-in Plastic Leveling Leg

★★★★★

4 Reviews

PartSelect Number PS1152204

Manufacturer Part Number 134548800

This is a screw in leveling leg for your washing machine. It supports the appliance by screwing in place to create a stable and flat surface. Take note that you are able to adjust the height of your appliance to make it leveled. This model is made entirely of plastic and is white in color. It is just under 2.5 inches long, 1.5 inches wide, and the head has a diameter of roughly 1.5 inches.

Installation Instructions

Sandra from Denton, TX

Stopped agitating versus level washer feet/leg

My washing machine stopped agitating and spinning and I couldn't afford a repair man...plus I wanted to exhaust any obvious problems first. One of the leveler feet had broken years ago. Since I luckily had determined via reading other posts that the agitator won't work if the cycle safety switch is not functioning right, I thought the safety switch might need to be changed but after careful thought, I decided to order a new levelling leg first because maybe the broken levelling leg was shaking the safety switch so it wasn't connecting right. Once I received the leg overnight, I flipped the washer on its side and had to drill out the old leg. It was a little tricky because of how it broke, but the drill worked. I flipped the washer back up, leveled it with the new foot, and the agitator was miraculously working again...just like new. I didn't need the safety switch. Thanks to partselect.com for having the details of my washer parts to study up on and get me the right part so quickly. I saved myself alot of money. Read more...

Your Price

$18.22

Kenmore Washer Dryer Combo Rear Leveling Leg

★★★★★

1 Review

PartSelect Number PS11741869

Manufacturer Part Number WP358594

This leveling leg is sold individually.

Installation Instructions

david from SEVERNA PARK, MD

plastic cover came off rear leveling leg

slipped new rear leveling legs into leveling fixture. Fit even though it wasn't specified to be the right part for this old washer. Read more...

Your Price

$24.67

Kenmore Washer Dryer Combo Leveling Leg

PartSelect Number PS11741907

Manufacturer Part Number WP367594

Your Price

$19.30

Kenmore Washer Dryer Combo Levelling Leg

PartSelect Number PS12348435

Manufacturer Part Number W11176431

This leveling leg (part number W11176431) is for laundry centers. Leveling leg W11176431 supports the laundry center. Adjust the height of the leveling leg to make the laundry center level.