Estate Refrigerator Dispensers

Videos!

Your Price

$37.91

Estate Refrigerator Dispenser Overflow Grille

★★★★★

25 Reviews

PartSelect Number PS11739623

Manufacturer Part Number WP2206670B

This grille is located on the bottom of the ice/water dispenser to catch the overflow. (Black)

Fixes these symptoms

Leaking
See more...

Installation Instructions

Raymond from Coconut Creek, FL

Kitchenaid refrigerator shelf frames were cracking, needed replacement

I had to purchase two shelves and adjustable brackets - though I only needed the slidign glass shelves . Customjer service rep was helpful and pleasant, though the replacements shelves did not bear the Kitchenaid Logo or frosted scheme on glass shelves (I requested and was informed that the replacement shelves would match my Superbra) - Otherwise, parts, when available, were shipped and arrived in well packaged boxes and not damaged. Parts were cheaper than Kitchenaid, though I would call Kitchenaid first to inquire about matching parts prior to ordering from partselect, if that matters to the buyer...Matching shelves may not in fact be available from manufacturer due to age of appliance. Read more...

Videos!

Your Price

$17.15

Estate Refrigerator Ice Dispenser Door Chute

★★★★★

9 Reviews

PartSelect Number PS11739035

Manufacturer Part Number WP2180353

*Please note, this door chute is no longer being manufactured with a heater.

Fixes these symptoms

Door Sweating
Door won’t open or close
Frost buildup
See more...

Installation Instructions

Jeff from Parchment, MI

Water dispenser not working, Ice dispenser chute icing up

I removed the outer ice/water dispenser cover following directions I found on-line (push down and gently pry out at the bottom). I then removed several nut-head screws which were holding a plastic plate which had the door light and electric control wiring mounted in it. Behind that I found a broken tab on the Control Bracket which was why my water dispencer was not working and I found the chute door for the ice maker was chewed up which allowed warm air into the chute and was causing my ice build up problem. Replacing the Control Bracket was easy. Just note how things come apart. Putting the chute door in was a little more complicated, but again, note how things come apart and you should not have a problem putting it back together. Read more...

Your Price

$51.61

Estate Refrigerator Water Dispenser Lever - White

★★★★★

3 Reviews

PartSelect Number PS11749101

Manufacturer Part Number WPW10152858

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

Fixes these symptoms

Not dispensing water
See more...

Installation Instructions

Mario from Oklahoma City, OK

Replacing still working but old and stained levers

The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps. Read more...

Your Price

$56.33

Estate Refrigerator Overflow Grille - White

★★★★★

4 Reviews

PartSelect Number PS11739628

Manufacturer Part Number WP2206671W

This part is located at the base of the dispenser bay catches small spills and allows them to evaporate. The drip tray is removable for easy cleaning.

Installation Instructions

Chashia from FT LAUDERDALE, FL

missing parts

I had to replace the missing whole parts which no assembly was required to do Read more...

Your Price

$56.33

Estate Refrigerator Lever, Water Dispenser (black)

PartSelect Number PS11749102

Manufacturer Part Number WPW10152859

Improve your Whirlpool appliance functionality with our genuine OEM water lever. Black in color, this lever is instrumental for refrigerators, releasing ice or water upon pressing. It is designed with precision, maintaining fine balance between style and function. Remember, while parts can appear similar, the size and shape can feature slight variations. Remember to safely store any food that could deteriorate while power is off before installation. Be sure to wear work gloves to protect your hands during installation. This product is an OEM part for some models of Whirlpool.

Installation Instructions

James from El Paso, TX

Crisper drawer was broken. Other parts were stained due to hard water.

All the parts were easy to find on the website and they arrived within a few days.

Only needed a screw driver to remove the old water arm dispenser and to install the new one.

The drawer, the ice guide and the grille/tray all snapped in place. Read more...

Your Price

$18.22

Estate Refrigerator Dispenser Door Pin

★★★★★

3 Reviews

PartSelect Number PS11739225

Manufacturer Part Number WP2196195

This dispenser door pin comes with the washer.

Fixes these symptoms

Ice maker won’t dispense ice
Leaking
See more...

Installation Instructions

BILL from BATESVILLE, MS

Front Door Ice Wouldn't Work And Air Going Into Freezer

Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks Read more...

Videos!

Your Price

$53.20

Estate Refrigerator Overflow Grille - White

★★★★★

14 Reviews

PartSelect Number PS11739625

Manufacturer Part Number WP2206670W

This is a genuine Whirlpool dispenser overflow grille for your refrigerator. This part is made of plastic and snaps in under the water and ice dispensers on your refrigerator door. Its function is to catch drips and spills from the dispenser.

Your Price

$102.10

Estate Refrigerator Ice Door Mechanism

★★★★★

1 Review

PartSelect Number PS11738300

Manufacturer Part Number WP1120581

Installation Instructions

Alex from Columbiana, OH

Ice Dispenser flap would not close-delay mechanism quit working

The hardest part of this job was removing the front cover over the water and ice dispensing unit.

Step 1: remove front cover by inserting flat head screwdriver into one of small slots on the bottom side of the cover. Push up firmly, but not too hard (don't beak the plastic cover). As you are pushing up, slightly pry the bottom edge away from refrigerator door. Then, do the same for the other side.
Step 2: Now with both edges slghtly pried away for door, you will now need to use your hands and apply an upward pressure on the cover. (Understand that there are three tabs on the top side of the cover that must come about 1/4" out of slots on the top side of the door.) Try wiggling the cover, while applying upward pressure. You may find the door handle restricting one of the tabs, but you can slide the cover to the side to get it out.
Step 3: with the cover removed, now you can use the nut driver to remove the one (1) screw that holds the mechanism in place. Be sure to see how it fits over the dispensing lever.

Step 4: Install the new delay mechanism by inserting the prong over the dispensing lever and seat into place. Insert screw and tighten.
Step 5: ensure that you installed the device properly by actuating the ice dispenser. If everything is OK, proceed to next step. If not, make sure you installed it correctly.
Step 6: Reinstall front cover by insering the three upper tabs into slots at the top of the dispensing area. Apply downward pressure with your hands, then push the bottom side of the cover in. You should hear them snap into place.
Step 7: Dispense ice into a glass, add water, and enjoy your finsihed project Read more...