Craftsman Lawn Tractor Caps and Lids

Your Price

$6.40

Craftsman Lawn Tractor Cap Axle Black 1 50 X 00

★★★★★

1 Review

PartSelect Number PS9007667

Manufacturer Part Number 532104757

This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.

Installation Instructions

Anthony from OLIVEHILL, TN

Wheel bushings were bad

Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...

Videos!

Your Price

$8.55

Craftsman Lawn Tractor Lawn Mower Wheel Dust Cover

★★★★★

3 Reviews

PartSelect Number PS9982436

Manufacturer Part Number 581840401

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axle. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

Installation Instructions

Walter from EVERETT, WA

Front drive wheel locked up, causing the mower to not be able to be pushed.

Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap. Read more...

Your Price

$6.40

Craftsman Lawn Tractor Lawn Mower Spindle Cap

PartSelect Number PS9285732

Manufacturer Part Number 532121232

It is an authentic replacement cap-spindle that is supplied by the original equipment manufacturer for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It is an identical replacement for a missing or damaged cap that was originally installed on a new equipment. The cap is utilized to cover the spindle. Make sure to check the appropriate diagrams of your model for the exact location and application of this hardware. This high-quality cap-spindle is made of durable plastic material and is sold individually.

Your Price

$7.04

Craftsman Lawn Tractor Grease Cap

PartSelect Number PS16381596

Manufacturer Part Number 595281301

It is a genuine item that is supplied by the original equipment manufacturer for Husqvarna, Poulan and Jonsered riding lawn mowers and garden tractors. The cap is secured to the lever and it helps to protect the bearing and internal grease from dust and other debris. If your part is lost or damaged, this will provide an identical replacement for the original component that was installed on a new unit. This high-quality cap is made of durable metal and is sold as an individual item. You may need a flat-head screwdriver and a rubber mallet to remove the old cap and secure the new one.

Your Price

$6.40

Craftsman Lawn Tractor Sleeve Cap

PartSelect Number PS9008340

Manufacturer Part Number 532105304

This is an authentic replacement part sourced directly from the manufacturer. The cap is commonly found in Craftsman lawn tractors. This part is placed on the end of the torsion spring to keep it from damaging the deflector shield. You may require a wrench and pliers when replacing this item. The cap is available as an individual replacement part.

Your Price

$48.79

Craftsman Lawn Tractor Shield Defl Ector

★★★★★

1 Review

PartSelect Number PS9014382

Manufacturer Part Number 532130968

A genuine OEM sourced replacement deflector shield that is commonly utilized on Craftsman riding lawn mowers and tractors. It is mounted to the side of the deck direct the grass clippings. This part is made from strong durable plastic and it is sold individually. Please note the hardware to secure this deflector shield is sold separately.

Your Price

$16.40

Craftsman Lawn Tractor Lawn Mower Deck Belt Cover

★★★★★

4 Reviews

PartSelect Number PS9133669

Manufacturer Part Number 783-06424A-0637

This is a genuine OEM sourced replacement belt cover designed for riding lawn mowers and tractors. It is attached to the top of the mower deck to cover and protect the mandrel pulley and the belt. This part is made out of metal and it is sold individually. Please note, the hardware to secure it is sold separately. You will need a wrench set to replace this cover.

Installation Instructions

J. Alonzo from TULALIP, WA

1 deck belt cover fell off and the other rusted and loosening

Removed the retaining screws on both belt covers and replaced them with the new ones i purchased. Read more...