Craftsman Lawn Tractor Bearings
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Lawn Tractor Bearings
Your Price
$11.29
In Stock
Craftsman Lawn Tractor Lawn Mower Flange Wheel Bearing
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
PartSelect Number PS9006914
Manufacturer Part Number 532009040
The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in question, or you notice the wheel is sloppy on the shaft.
You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.
Installation Instructions
robert from EUREKA, CA
transaxle rotated forward on 2015 Husqvarna YT42DXLS
2015 Husqvarna YT42DXLS. Both transaxle support struts broke causing the transaxle rotated forward and shear transaxle mounting bracket. The transaxle was not damaged. All 3 parts required replacement. There are some good youtube videos to watch to show how to complete the repair. HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Your Price
$18.34
In Stock
Craftsman Lawn Tractor Mandrel Ball Bearing
PartSelect Number PS9285698
Manufacturer Part Number 532110485
Genuine Husqvarna replacement part, this item is sold individually. This bearing is installed on top of the shaft which is encased in the mandrel assembly. The mandrel assembly is bolted to the mower deck. The shaft of the mandrel assembly is what the blade on all of the riding mowers listed below is attached to.
Your Price
$28.22
In Stock
Craftsman Lawn Tractor Lawn Mower Blade Bagging
PartSelect Number PS9286874
Manufacturer Part Number 532187256
This genuine manufacturer-sourced component which is made for use with Craftsman riding lawn mowers and garden tractors. The blade is specially designed for bagging the grass clippings, unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure a clean cut every time. Keep in mind this high-quality blade is made of durable metal and is sold individually. Please make sure to refer to the owners manual for the correct application of this item.
Your Price
$6.40
In Stock
Craftsman Lawn Tractor Lawn Mower Bearing
PartSelect Number PS9010748
Manufacturer Part Number 532003366
This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.
Your Price
$6.40
In Stock
Craftsman Lawn Tractor Lawn Mower Washer Thrust
PartSelect Number PS9006893
Manufacturer Part Number 532006266
The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.
Your Price
$38.50
In Stock
Craftsman Lawn Tractor Mandrel Shaft Assembly
PartSelect Number PS9286040
Manufacturer Part Number 532137646
Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replacing this part, First remove the Blade from the Mandrel Shaft. The Mandrel Assembly is easily detached by removing the three Washer Head Screws from above the Mandrel Housing on the Mower Deck . You will need to remove the Nut that is attached to the Mandrel Shaft, which is located above the Mandrel Pulley. The complete Mandrel Assembly should come right out now. Remove old Shaft from the Housing and place a new one in place of it. Re-attach the now Complete Mandrel Assembly back to the deck and attach pulleys, belts and blades.
Your Price
$7.50
In Stock
Craftsman Lawn Tractor Hexagonal Flange Bearing
PartSelect Number PS9416292
Manufacturer Part Number 741-04124
Genuine Manufacturer Approved replacement part designed for Riding Lawn Tractors and it has several applications. This Flange is made out of Metal and it is Sold Individually. One side is Flat like a washer and the other side is Hexagon shaped. Requires a Wrench to tighten or loosen.
Your Price
$10.65
In Stock
Craftsman Lawn Tractor Bearing, Ball 11/16x1
PartSelect Number PS8887153
Manufacturer Part Number 1705897SM
This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lubricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.
Your Price
$7.23
In Stock
Craftsman Lawn Tractor Steering Bushing
PartSelect Number PS9015678
Manufacturer Part Number 532195227
This manufacturer-supplied replacement part is designed for Husqvarna, Poulan and Weed Eater riding lawn mowers and garden tractors. The bushing helps to secure the steering wheel shaft on the steering boot. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the exact location and the correct installation, refer to the diagrams of your specific model. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the steering wheel in order to gain access to the bushing.
Your Price
$14.76
In Stock
Craftsman Lawn Tractor Snow Blower Greased Bearing
PartSelect Number PS9270711
Manufacturer Part Number 2108202SM
This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.
Related Craftsman Lawn Tractor Parts
- Craftsman Lawn Tractor Belts
- Craftsman Lawn Tractor Blades
- Craftsman Lawn Tractor Brackets and Flanges
- Craftsman Lawn Tractor Caps and Lids
- Craftsman Lawn Tractor Carburetors
- Craftsman Lawn Tractor Circuit Boards and Touch Pads
- Craftsman Lawn Tractor Control Cables
- Craftsman Lawn Tractor Deflectors and Chutes
- Craftsman Lawn Tractor Dipsticks
- Craftsman Lawn Tractor Ducts and Vents
- Craftsman Lawn Tractor Engines
- Craftsman Lawn Tractor Exhausts
- Craftsman Lawn Tractor Fans and Blowers
- Craftsman Lawn Tractor Filters
- Craftsman Lawn Tractor Fuses
- Craftsman Lawn Tractor Gears
- Craftsman Lawn Tractor Grilles and Kickplates
- Craftsman Lawn Tractor Handles
- Craftsman Lawn Tractor Hardware
- Craftsman Lawn Tractor Hinges
- Craftsman Lawn Tractor Hoses and Tubes
- Craftsman Lawn Tractor Ignitions
- Craftsman Lawn Tractor Knobs
- Craftsman Lawn Tractor Latches
- Craftsman Lawn Tractor Lights and Bulbs
- Craftsman Lawn Tractor Manuals and Literatures
- Craftsman Lawn Tractor Motors
- Craftsman Lawn Tractor Panels
- Craftsman Lawn Tractor Pedals
- Craftsman Lawn Tractor Pulleys
- Craftsman Lawn Tractor Pumps
- Craftsman Lawn Tractor Seals and Gaskets
- Craftsman Lawn Tractor Seats
- Craftsman Lawn Tractor Spark Plugs
- Craftsman Lawn Tractor Spindles
- Craftsman Lawn Tractor Springs and Shock Absorbers
- Craftsman Lawn Tractor Starters
- Craftsman Lawn Tractor Switches
- Craftsman Lawn Tractor Tanks and Containers
- Craftsman Lawn Tractor Transmissions and Clutches
- Craftsman Lawn Tractor Trays and Shelves
- Craftsman Lawn Tractor Trims
- Craftsman Lawn Tractor Valves
- Craftsman Lawn Tractor Wheels and Rollers
- Craftsman Lawn Tractor Wire Plugs and Connectors