Uni Cooktop Elements and Burners

Videos!

Your Price

$16.24

Uni Cooktop Terminal Block Kit

★★★★★

37 Reviews

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

Steven from Taylors, SC

rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place Read more...

Videos!

Your Price

$34.52

Uni Cooktop Surface Element - 8 Inch - 220V

★★★★★

23 Reviews

PartSelect Number PS2339241

Manufacturer Part Number 316442300

If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Kathy from Lebanon, IN

burner quit working

pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great. Read more...

Videos!

Your Price

$35.48

Uni Cooktop Surface Element - 6 Inch

★★★★★

9 Reviews

PartSelect Number PS2582086

Manufacturer Part Number 318372210

This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Chhabildas from Charlotte, NC

Enement was blew out.

I order the Element and received just in 4 days. It is Real incredible. I just opened the box and replaced the burners. Read more...

Videos!

Your Price

$161.67

Uni Cooktop Radiant Element with Limiter - 1200W

★★★★★

13 Reviews

PartSelect Number PS1528719

Manufacturer Part Number 318178110

This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.

Fixes these symptoms

Element will not heat
Will Not Start
See more...

Installation Instructions

Lori from Winter Haven, FL

burned out burner

First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!! Read more...