Toro String Trimmer Parts | Same Day Shipping | Millions of Parts

Popular Toro String Trimmer Parts

Spool-Large – Part Number: 73-8190
Your Price
$11.86
Spool-Large
(1)
PartSelect Number PS9101288
Manufacturer Part Number 73-8190
The Spool (Large) holds the cutting line (.065 line size recommended) and mounts to the bottom of the trimmer. It is black, plastic, and rated as "Easy" to install by customers. If broken or damaged due to general wear, it should be replaced. Refer to your make, model and diagram to check if this is the part you need.
Fixes these symptoms
No Symptoms for this part
Spring - Compression – Part Number: 73-8220
Your Price
$2.99
Spring - Compression
PartSelect Number PS9103192
Manufacturer Part Number 73-8220
The Compression Spring is a silver metal part, used to keep pressure on the spool. It attaches on top of the spool assembly, and is rated as "Easy" to install. When broken, damaged, or worn, you will have issues with the cutting line advancing and should replace the part. Refer to your make, model and diagram to ensure this is the correct part.
Fixes these symptoms
No Symptoms for this part
Spring-Compression – Part Number: 29-8230
Your Price
$6.14
Spring-Compression
PartSelect Number PS8943985
Manufacturer Part Number 29-8230
Fixes these symptoms
No Symptoms for this part
Eyelet-Guide – Part Number: 107-3344
Your Price
$2.99
Eyelet-Guide
PartSelect Number PS8830926
Manufacturer Part Number 107-3344
The Eyelet-Guide allows the cutting line to come out of the spool assembly without damaging the part of the housing that the eyelet is installed in. It attaches in the spool assembly, with the cutting line, and installation is rated as "Easy". If broken, damaged or worn, the line may start rubbing and this is a sign the part should be replaced. This black part comes individually sold. Refer to your make, model or diagram to ensure this is the correct part.
Fixes these symptoms
No Symptoms for this part
Air Filter – Part Number: 5687301
Your Price
$7.19
Air Filter
(2)
PartSelect Number PS9980509
Manufacturer Part Number 5687301
The OEM Air Filter is used to stop debris and particles from entering the carburetor and engine, which could cause damage. It is attached in the air filter housing. It comes in black, and is contructed from foam. Installation is rated as "Easy" by customers, and will require a screwdriver. (Tip: You can place the filter in a plastic bag with a bit of oil, remove it, and then squeeze the filter to drain the excess oil. The remaining oil will work as a sticky trap). If the part becomes worn over time, the engine will be hard to start and will run rich. In this case, replace the part. Refer to your make, model and diagram to ensure this is the correct part for you.
Fixes these symptoms
No Symptoms for this part
Cap-Drum – Part Number: 105-9422
Your Price
$6.95
Cap-Drum
PartSelect Number PS8827246
Manufacturer Part Number 105-9422
Fixes these symptoms
No Symptoms for this part
Eyelet – Part Number: 57-5630
Your Price
$3.94
Eyelet
PartSelect Number PS9031892
Manufacturer Part Number 57-5630
Fixes these symptoms
No Symptoms for this part
Knob-Handle – Part Number: 98-7134
Your Price
$2.99
Knob-Handle
PartSelect Number PS9189145
Manufacturer Part Number 98-7134
The Handle (or Knob Handle) is a black, plastic part which is rated as "Easy" to install by customers. It attaches onto the handle, so you can quickly release to fold down the handle bar. If the part is visibly broken (due to wear/fatigue), it should be replaced. Refer to your make, model and diagram to check if this is the right part for you.
Fixes these symptoms
No Symptoms for this part
Spool – Part Number: 88532
Your Price
$11.82
Spool
PartSelect Number PS10019734
Manufacturer Part Number 88532
Fixes these symptoms
No Symptoms for this part
Nut-Lock, Ni – Part Number: 3296-42
Your Price
$2.99
Nut-Lock, Ni
PartSelect Number PS8953555
Manufacturer Part Number 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.
Fixes these symptoms
No Symptoms for this part