Toro Snow Blower Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Toro Snow Blower Hoses and Tubes
Toro Snow Blower Connector-hose
PartSelect Number PS9074730
Manufacturer Part Number 692317
This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Metal, it is Sold Individually.
Toro Snow Blower Line-fuel
PartSelect Number PS9140673
Manufacturer Part Number 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.
Toro Snow Blower Engine Primer Line
PartSelect Number PS9275983
Manufacturer Part Number 32180C
This primer line hose, which measures 18-3/4 inches long is a crucial component in your outdoor power equipment. It delivers fuel from the primer bulb to the carburetor, providing the initial fuel boost to start the engine. If you notice fuel leaks, cracks, or visible wear on the hose, it means that it is broken. Additionally, a spongy primer bulb or the failure to deliver fuel to the carburetor when pressed are signs of a malfunctioning primer line hose. When this happens, your machine will be difficult or impossible to start. To remove the hose from your machine, disconnect it from both the carburetor and the primer bulb with pliers or a screwdriver. Please note that this replacement part is sold individually as an authentic OEM component.
Toro Snow Blower Hose-vacuum
PartSelect Number PS9306672
Manufacturer Part Number 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.
Toro Snow Blower Engine Fuel Fitting
PartSelect Number PS9051934
Manufacturer Part Number 631807
This is an original replacement part manufactured for use with small engines. This special fuel fitting is used to connect the fuel line to the carburetor. Overtime old fuel can clog passageways within the carburetor and may require the carburetor to be rebuilt. This fuel fitting is sold as an individual replacement part, please see model diagram for associative parts.
Toro Snow Blower Fuel Line
PartSelect Number PS10007099
Manufacturer Part Number 740017B
The fuel line is a rubber hose that is responsible for allowing the fuel tank to supply the carburetor and various engine components with fuel. This fuel line is designed to be compatible with various types of lawn equipment and is an authentic OEM part. Because it interacts with gas and oil frequently, it will eventually become brittle and crack and need to be replaced. To replace it, you will need to drain the fuel from your equipment, remove the clamps securing the ends of the line, and then swap out the old line for the new, before installing the clamps back. Make sure to check the fuel line frequently for cracks and damage to prevent any leaks from harming your equipment and to maintain its health and performance.
Toro Snow Blower Tube-breather
PartSelect Number PS9055136
Manufacturer Part Number 67068
This item is an authentic OEM sourced part that is intended to be used with Briggs and Stratton engines which are commonly installed on a variety of lawn and garden equipment. The breather tube is used to guide the direction of excess gasses and fluid that escape the engine from a higher level of internal pressure. It is made of high-quality material and is sold as an individual item. Refer to the appropriate diagrams for your model to ensure the correct repair procedure.
Toro Snow Blower Hose-primer
PartSelect Number PS9279440
Manufacturer Part Number 44-3173
This is a genuine item that is supplied directly from the original equipment manufacturer for use with Toro and Lawn Boy lawn and garden equipment. It is the special hose that connects to the primer bulb. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hose. Keep in mind this high-quality item is made of durable rubber and is sold individually.
Related Toro Snow Blower Parts
- Toro Snow Blower Bearings
- Toro Snow Blower Belts
- Toro Snow Blower Blades
- Toro Snow Blower Brackets and Flanges
- Toro Snow Blower Caps and Lids
- Toro Snow Blower Carburetors
- Toro Snow Blower Control Cables
- Toro Snow Blower Deflectors and Chutes
- Toro Snow Blower Dipsticks
- Toro Snow Blower Engines
- Toro Snow Blower Exhausts
- Toro Snow Blower Fans and Blowers
- Toro Snow Blower Handles
- Toro Snow Blower Hardware
- Toro Snow Blower Ignitions
- Toro Snow Blower Knobs
- Toro Snow Blower Latches
- Toro Snow Blower Pulleys
- Toro Snow Blower Seals and Gaskets
- Toro Snow Blower Spark Plugs
- Toro Snow Blower Springs and Shock Absorbers
- Toro Snow Blower Starters
- Toro Snow Blower Switches
- Toro Snow Blower Tanks and Containers
- Toro Snow Blower Transmissions and Clutches
- Toro Snow Blower Valves
- Toro Snow Blower Wheels and Rollers
- Toro Snow Blower Wire Plugs and Connectors