Tecumseh Engine Seals and Gaskets
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Tecumseh Engine Seals and Gaskets
Your Price
$5.28
In Stock
Tecumseh Engine Gasket
PartSelect Number PS8938792
Manufacturer Part Number 26756
This item is available as an individual replacement part. The gasket attaches to the intake pipe and is made out of a thin material. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it breaks. This genuine item is supplied by the original equipment manufacturer for use with lawn mowers, lawn tractors, and snowblowers made by Tecumseh, Toro, and Lawn Boy.
Your Price
$6.40
In Stock
Your Price
$6.40
In Stock
Tecumseh Engine Gasket-pipe, Intake
PartSelect Number PS8956926
Manufacturer Part Number 36786
This replacement intake gasket is an authentic OEM sourced part that is specially produced for use with Tecumseh engines commonly installed on Toro lawn and garden equipment. Its purpose is to create an air tight seal for the carburetor air intake pipe. Over time gaskets will deteriorate and may crack eventually requiring a replacement. It is made from high quality composite material and it is sold individually.
Your Price
$5.28
Special Order
Tecumseh Engine Breather Gasket
PartSelect Number PS8942323
Manufacturer Part Number 27896A
This OEM valve cover gasket, also known as the breather gasket, creates a seal between the breather body and cylinder block in your lawn equipment. Made of flexible plastic, it measures 2 inches by 4 inches. Oil stains or leaks around the valve cover indicate a problem with the gasket. You may also notice a burning smell or ticking noise from the engine. If the gasket is not replaced, it can lead to severe engine damage and even engine failure. When replacing the gasket, start by turning off your machine and disconnecting the spark plug. Depending on your equipment model and make, you may need to remove components like the air filter or spark plug wires to access the valve cover. Refer to your user manual for guidance. Once you have access to the valve cover, use a wrench or socket to unthread the securing bolts or screws. Then, carefully peel off the old gasket. Please keep in mind that this replacement part is sold individually.
Your Price
$6.40
In Stock
Tecumseh Engine Trimmer Air Cleaner Gasket
PartSelect Number PS8958511
Manufacturer Part Number 34338
This is an authentic item which is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is a special gasket which helps to provide a tight seal for the air cleaner, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable rubber and is sold individually.
Installation Instructions
Richard from Geneva, IL
Leaking gasoline from carburetor bowl. No air filter
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After about 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Read more...
Your Price
$4.23
Special Order
Tecumseh Engine O-ring
PartSelect Number PS9050564
Manufacturer Part Number 632547
This O-ring is designed for use with small engine carburetors and is made of rubber, meaning over time and further exposure to fuel, it will become brittle and crack. This O-ring is installed within the carburetor and is located between securing screws near the base. If disassembling your equipment to replace this O-ring, it is recommended you inspect the other parts to ensure optimal performance and to prevent any leaks. Featuring an inner-diameter of approximately 0.25-inches, the replacement process for this O-ring in your engine will vary, so check the user manual for exact location of this part.
Your Price
$5.28
In Stock
Tecumseh Engine Gasket
PartSelect Number PS9274448
Manufacturer Part Number 27915A
This intake gasket is designed for use with various lawn and garden equipment models and is sold as an individual part. This intake gasket is used to create a tight seal for the intake manifold and engine block or cylinder head. Constructed of a composite material, this intake gasket, over time and through extended exposure to high temperatures, compression, pressure, and simple age, can wear out and need to be replaced. When the intake gasket is worn out or damaged, it means less of a seal for the engine, resulting in air escaping and engine misfires, coupled with general performance issues. This gasket is sold as an individual part and will require a screwdriver and/or wrench to replace. Reference to the user manual for your equipment for exact placement and location of this gasket.
Your Price
$6.40
In Stock
Tecumseh Engine Gasket
PartSelect Number PS8959904
Manufacturer Part Number 37610
This is a genuine replacement part manufactured for use with small engines that are commonly installed on riding lawnmowers. The gasket fits into the crankcase and is used to seal the oil fill tube. This gasket is available as an individual replacement part.
Your Price
$4.23
In Stock
Your Price
$5.28
In Stock
Tecumseh Engine O-ring
PartSelect Number PS8954279
Manufacturer Part Number 35499
This rubber O-ring is a genuine OEM part that is designed for use with various outdoor power equipment models and is sold individually. O-rings are used to seal connections between parts and because of the nature of this O-ring contacting gas and oil, over time it will become brittle and less effective, or crack. When this happens, you will need to replace the part, and this one is a guaranteed fit. This O-ring is typically attached to an oil fill tube for measuring the level of oil in your equipment, to help create the necessary seal that prevents the cap from becoming loose and dirt from entering the tube.
Related Tecumseh Engine Parts
- Tecumseh Engine Brackets and Flanges
- Tecumseh Engine Caps and Lids
- Tecumseh Engine Carburetors
- Tecumseh Engine Dipsticks
- Tecumseh Engine Engines
- Tecumseh Engine Exhausts
- Tecumseh Engine Fans and Blowers
- Tecumseh Engine Filters
- Tecumseh Engine Hardware
- Tecumseh Engine Hoses and Tubes
- Tecumseh Engine Knobs
- Tecumseh Engine Spark Plugs
- Tecumseh Engine Springs and Shock Absorbers
- Tecumseh Engine Starters
- Tecumseh Engine Switches
- Tecumseh Engine Tanks and Containers
- Tecumseh Engine Valves
- Tecumseh Engine Wheels and Rollers