Snapper Lawn Mower Hoses and Tubes
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Snapper Lawn Mower Hoses and Tubes
Your Price
$10.60
In Stock
Your Price
$16.54
On Order
Snapper Lawn Mower Line-fuel
PartSelect Number PS9140673
Manufacturer Part Number 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.
Your Price
$7.73
In Stock
Snapper Lawn Mower Fitting, Grease
PartSelect Number PS16404090
Manufacturer Part Number 703907
Zerk fitting 1/4
Your Price
$36.17
In Stock
Snapper Lawn Mower Water Nozzle Adaptor
PartSelect Number PS9159286
Manufacturer Part Number 921-04041
This special item is attached to the deck allowing a garden hose to be connected to clean under the deck. It is an identical replacement for a damaged or a missing hardware that was included with a new equipment. Keep in mind this high-quality part is made of durable plastic and is sold as an individual item. It is a genuine OEM supplied water nozzle adaptor which is made for riding lawn mowers and garden tractors.
Your Price
$10.60
In Stock
Snapper Lawn Mower Hose-vacuum
PartSelect Number PS9306672
Manufacturer Part Number 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.
Your Price
$35.76
In Stock
Snapper Lawn Mower Hose-oil Drain
PartSelect Number PS11829359
Manufacturer Part Number 594200
This is an authentic OEM sourced replacement part which is specially made for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It provides an identical replacement for a missing or a faulty hose that is utilized to drain the oil. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality hose is made of durable material and is sold individually.
Your Price
$6.91
Special Order
Snapper Lawn Mower Nozzle-deck Wash
PartSelect Number PS9105169
Manufacturer Part Number 731-07487
This is a genuine OEM part made specially to fit the lawn mowers/tractors listed below. These machines feature a Deck Wash System, which allows a hose to be connected to the deck to rinse the undercarriage. The hose is connected via this water nozzle. Deck must be washed after every mowing. Sold individually.
Installation Instructions
Dan from LAKEWOOD, OH
I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozzle, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Read more...
Your Price
$16.36
In Stock
Your Price
$153.61
In Stock
Snapper Lawn Mower Hose Assembly (25.5 )
PartSelect Number PS18594207
Manufacturer Part Number 5022710SM
Hose assembly (25.5)
Your Price
$65.23
Special Order
Snapper Lawn Mower Fuel Hose Assembly - 20
PartSelect Number PS18596275
Manufacturer Part Number 5101217SM
This is a genuine replacement part sourced directly from the manufacturer. The fuel hose assembly is commonly found in lawn mowers from Snapper and Simplicity. This part includes a flexible plastic tube with metal connector nozzles, and it is used to carry fuel from the fuel tank to the fuel pump. This item is sold as an individual replacement part.
Related Snapper Lawn Mower Parts
- Snapper Lawn Mower Bags
- Snapper Lawn Mower Bearings
- Snapper Lawn Mower Belts
- Snapper Lawn Mower Blades
- Snapper Lawn Mower Brackets and Flanges
- Snapper Lawn Mower Caps and Lids
- Snapper Lawn Mower Circuit Boards and Touch Pads
- Snapper Lawn Mower Control Cables
- Snapper Lawn Mower Deflectors and Chutes
- Snapper Lawn Mower Filters
- Snapper Lawn Mower Fuses
- Snapper Lawn Mower Grilles and Kickplates
- Snapper Lawn Mower Handles
- Snapper Lawn Mower Hardware
- Snapper Lawn Mower Knobs
- Snapper Lawn Mower Latches
- Snapper Lawn Mower Pedals
- Snapper Lawn Mower Pulleys
- Snapper Lawn Mower Seals and Gaskets
- Snapper Lawn Mower Seats
- Snapper Lawn Mower Spindles
- Snapper Lawn Mower Springs and Shock Absorbers
- Snapper Lawn Mower Starters
- Snapper Lawn Mower Switches
- Snapper Lawn Mower Tanks and Containers
- Snapper Lawn Mower Transmissions and Clutches
- Snapper Lawn Mower Wheels and Rollers