Snapper Lawn Mower Hardware

Your Price

$6.40

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Your Price

$6.47

Snapper Lawn Mower Screw

PartSelect Number PS12664831

Manufacturer Part Number 710-04995A

This replacement screw is a genuine item that is sourced from original equipment manufacturer. It is a high quality hardware that is commonly used with walk-behind lawn mowers. This screw has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and use of this hardware. You will need a wrench when working with this screw.

Installation Instructions

Dan from LAKEWOOD, OH

I replaced the deck on my Craftsman Lawn Mower, and needed a new water nozzle and some screws to hold the front wheel assembly on.

I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozzle, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well. Read more...

Your Price

$6.40

Snapper Lawn Mower Screw, 3/8-24 X 1.50 (w/25mm Blade Adapter)

PartSelect Number PS9088496

Manufacturer Part Number 710-1044

The hex bolt attaches to the washer and the square key. This part is an OEM from Craftsman for use in snowblowers and lawn mowers. It is available as an individual replacement part and is made of metal. If this item becomes broken or stripped it will need to be replaced and may require a socket set during the installation.

Your Price

$6.40

Snapper Lawn Mower Carriage Bolt 5/16-18 X 3/4" Lg.

PartSelect Number PS9298671

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Your Price

$7.04

Snapper Lawn Mower Screw

PartSelect Number PS12653560

Manufacturer Part Number 720-05066A

Wing knob screw 1/4-20 x 1

Installation Instructions

Paul from NIXA, MO

Lost wing knob and nut that holds the handle onto the mower

Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how not to run a business. Read more...

Your Price

$6.40

Snapper Lawn Mower Nut-flglk

★★★★★

1 Review

PartSelect Number PS9299574

Manufacturer Part Number 712-04064

Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part. This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair. Customers rate this repair as Easy.

Your Price

$8.76

Snapper Lawn Mower Screw-carriage 5/1

PartSelect Number PS9298717

Manufacturer Part Number 710-04998

This genuine screw is supplied directly from the original equipment manufacturer for use with Craftsman walk-behind lawn mowers and snowblowers. Check the diagrams for your model to ensure the correct repair procedure. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the screw and keeps it from turning when the nut is tightened. This screw is made of high-quality metal and is sold individually. A wrench might be needed to replace this hardware.

Your Price

$7.47

Snapper Lawn Mower Washer, Thrust

PartSelect Number PS9070364

Manufacturer Part Number 7014523YP

This thrust washer is an authentic item which is supplied by the original manufacturer for Murray and Snapper lawn mowers. It is a special type of washer that will resist torque applied by the bearing while ensuring a tight fit. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This thrust washer is made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and application.

Your Price

$8.93

Snapper Lawn Mower Screw-hex Tap 1/4

PartSelect Number PS9087241

Manufacturer Part Number 710-0895

This is a genuine replacement part manufactured for use with lawn and garden power equipment. This versatile screw has a flanged hex head and can be used in a variety of applications. The screw is available as an individual replacement part, please see model diagram for part location and usage.

Your Price

$6.73

Snapper Lawn Mower Flange Lock Nut

PartSelect Number PS9299591

Manufacturer Part Number 712-04217

It is an authentic OEM sourced item which is specially produced for use with lawn mowers made by MTD, Bolens, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet. The flange lock nut attaches to the rear wheel. It may require a socket set during installation and will need to be replaced if it becomes broken. This item is priced individually and is made out of metal.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Popular Snapper Lawn Mower Hardware

Related Snapper Lawn Mower Parts

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Snapper Lawn Mower Hardware

Find Your Part

Popular Snapper Lawn Mower Hardware

Related Snapper Lawn Mower Parts