Range Ducts and Vents

Shop By Brand

Popular Range Ducts and Vents

Your Price
$8.45
  In Stock
Air Duct Bracket
★★★★★
★★★★★
(1)
PartSelect Number PS3523851
Manufacturer Part Number 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
Your Price
$5.74
  In Stock
Damper
★★★★★
★★★★★
(3)
PartSelect Number PS3524148
Manufacturer Part Number 4900W1A001B
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from the microwave. This vent damper door measures approximately 10 inches long x 3 inches wide and fits LG microwaves.
Installation Instructions
Rene from MORENO VALLEY, CA
Wanted to see the instructions before I install it.
Wanted to see the instructions before I install it. Read more...
Your Price
$67.29
  In Stock
Wall Vent Cap Kit - 5 Inch duct - with Gray Cover
★★★★★
★★★★★
(3)
PartSelect Number PS2105196
Manufacturer Part Number A405
This wall vent cap kit comes with a spring loaded damper. This part can be painted.
Installation Instructions
Robert from Jacksonville, AL
Didn't like the appearance of a cheap-looking dryer vent on an exposed area of my new house.
I enlarged the vent access hole from four (4) inches to five (5) inches to accomodate a larger pipe. I then purchased locally a 5" to 4" transition and installed it in the enlarged opening, and sealed the space with expanding foam for a bug-proof air-tight fit. On the inside of the house I attached a short length of 4" pipe to attach the dryer vent pipe. On the outside, in the place of the aluminum vent cap, I installed the 5" Jenn-Aire vent cover purchased from PartSelect.com. The new vent is large enough to completely cover the chiseled out masonry area, and the 5" outlet reduces air noise from the dryer, but best of all the new vent provides the high quality look I needed to match the brick of my new home. Read more...
Your Price
$8.67
  On Order
DAMPER
PartSelect Number PS1018887
Manufacturer Part Number WB06X10686
Your Price
$59.22
  In Stock
Assembly HOOD DAMPER
★★★★★
★★★★★
(2)
PartSelect Number PS6447600
Manufacturer Part Number WB06X10920
Your Price
$46.55
  In Stock
Adapter Assembly,vent tube ,w/converter
PartSelect Number PS1146692
Manufacturer Part Number 318317100
Your Price
$35.61
  In Stock
TUBE
PartSelect Number PS977456
Manufacturer Part Number 316073606
Your Price
$39.03
  In Stock
Center Vent - Black
PartSelect Number PS11747273
Manufacturer Part Number WP9760225BL
Your Price
$39.41
  In Stock
Microwave Vent Damper
PartSelect Number PS8767001
Manufacturer Part Number WB06X10935
The vent damper attaches to the outer cabinet and directs airflow through the vent duct.
Your Price
$31.87
  In Stock
VENT TUBE
PartSelect Number PS247929
Manufacturer Part Number WB38T10006
Installation Instructions
Danny from FLORENCE, MA
Vent Tube Baked on Mouse Urine Smell
Mice took over trailer, after eliminating mice, and cleaning oven and range thoroughly, I noticed that the only place the mouse urine smell was still coming from was the vent tube. Noticed soiling around tube where it went through and into oven. I removed the center rack, layed some foil to catch any debris that may fall from the tube when it is removed. I removed old vent tube simply by removing the two nut screws on the roof of the oven. I had to pry it out a little bit. I then cut out and soiled insulation with razor knife, I inserted the new vent tube from the inside, and replace 1/4 nut screws and tighten. Read more...

Brands