Water Inlet Valve Assembly WH13X10017

In plug remove water hoses 4 screws hold top remove 6 screws hold plastic liner remove 2 1/4 hose clamps slide back remove hoses from water inlet valve 2 screws hold plastic water lines remove 5 screws hold water inlet valve lift off remove plastic water lines install new valve and replace parts in reverse

When washer failed to drain after washing, there was a test you can do with the display pad. Doing the test, the water pump would make a loud grinding noise. I knew the pump was bad, as the washer would not drain at all. The other problem was leaking water into the wash tub after washing. This had been a problem for a while . We were just ... Read more turning the water off after washing clothes. This was a good time to repair this as well. Replaced the water control valve and that problem was solved as well.

It was going to take my normal repair person at least 5 days to get the part. I ordered the part at half of what he was going to charge me (I did pay for the overnight shipping) and he installed it the next day.