Overlay WB27K10170

Hi Paul, thank you for contacting us. We would recommend following these general instructions to replace the overlay, part number PS953692: Disassemble the back cover of the top panel by removing the screws. Then, remove the quarter-inch screws on each edge of the control board and take the board off. Remove the wiring connections using a nose plier. Using a heat gun, heat the overlay by keeping it at some distance and constantly moving the gun above the overlay. Then, use a putty knife to carefully peel the overlay off. Install the new overlay by simply placing it on the control board and pressing it with your hand. Make the wiring connections and reinstall the control board. Put the outer panel cover back on by tightening the screws. We hope this helps!