Light Bulb - 40W WB25X10030

Hi Dick, Thank you for your question. If your appliance has those settings then this part will accommodate them as it is the bulb that works with your appliance. Good luck with your repair.

Hello Harry, thank you for your question. This bulb is a screw in type bulb. I hope this helps!

Hi Ineke, the entire bulb should have come out as normal. Perhaps you could grab the base with plies to unthread the base? Thank you for your question and good luck with your repair!

Hello Scott, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8767095. Some appliance use this bulb for inside the cabinet, however it is used for the counter top light for yours. We hope this helps.

Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS8767095. Please feel free to give our customer service a call if you wish to place an order. Hope this helps!

Hello Linda, Thank you for contacting us. I show the correct part number as PS8767095. Depending on the degree of melting that took place, you should also check the light bulb socket in case that needs to be replaced as well. That is part number PS8753748. To chance these parts you will simply need to remove the screws holding the glass cover for the light bulb as well as the socket if applicable. You will then turn the bulb counter clockwise to remove, and clockwise to replace. Good luck with your repair! Have a great day.

Hello Lucille, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS8767095. Hope this helps!

Hello Dolores, thank you for reaching out. Based on our research, the issue is most likely with the control board. The microwave control board controls the power and voltage of the cooktop lamps; that is how the intensity is controlled. On the low or night setting, one relay closes and supplies the power to the bulbs. On the high setting, both relays close and supply power to the bulbs. The increase in voltage causes the light to intensify. Replacing the control board, part number PS12296298, will solve the issue. We hope this is what you were looking for!

Hello Lorena, thank you for your question. You will need to check the door switches, the fuse, the light socket and door latch assembly. The light switch and vent fan switch is a part of the board, where you push for the different settings (hi, low, off). You might also want to check the wiring harnesses inside the oven cavity. I hope this helps!

Hello M, Thanks for your question. The only bulb offered for this model is part number PS8767095. Your microwave's internal parts can contain electrical charges even when the microwave is unplugged, so you will want a licensed technician to install this part. I hope this helps.