| |
29 of 30 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Brian from Burr Ridge, IL
The old knob broke.
Make sure the sleeve from the old knob is not on the metal post which it is installed. Provided the old metal sleeve is not on the post, just slide the new knob on.
|
5 of 6 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Daniel from Traverse City, MI
Main control knob broke
Just slid the new knob on. Unfortunately, I ordered the WRONG knob. Our dryer has three small knobs and one big one. When ordering, I didn't take the time to make sure I had the right one. We are using the small one now, but will replace it with the correct big one when the small one breaks.
|
4 of 7 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: charles from saylorsburg, PA
Replacing a function knob on the dryer
The knob split by the shaft. Quick and easy I ordered the exact part from Part-Select, it in 2 days and pushed on the new knob with my fingers.
It was quite easy thanks to Part-Select. You can be sure I will use them again!
|
2 of 2 people found this instruction helpful
Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Brenda from ALLENTOWN, PA
I broke my switch that turn the dryer on and I also broke the knob
I watch the video and did exactly what the video say , the video was 3 minutes and I can't remember how many seconds long I repaired it in 3 minutes or less
|
1 of 1 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: MaryEllen from Clifton, NJ
Broken knob switch
Took top off dryer which made easy access to switch and change part ,put it back together thanks
|
2 of 4 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Laura from Waukesha, WI
Main knob broke off dryer
Took 2 seconds and no tools. Just slid new knob on. Unfortunately, I didn't order the correct knob but it still works. That was my mistake. I received the knob the day after I ordered it. I was impressed with the speed. After a few weeks of using a pliers to start my dryer, I was really glad I finally replaced the knob! Not sure what took me so long as it couldn't have been easier to do. Very happy with partselect's selections and promptness.
|
1 of 2 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Linda from Englewood, FL
Knob shafts were both cracked
simply replaced both knobs , they were really in need of replacing .
Also found electrical panel breaker was faulty , added new panel .
Glad both problems are taken care of , and dryer works again .
|
0 of 1 people found this instruction helpful
Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: james from clearwater, FL
Broken knob, broken switch from using pliers to turn on
took off back panel, replaced switch , replaced knob
|