Freezer Handle Support

Hi Gene, Thank you for the question. The small white plastic support for the right side is 13-2, Part Number: PS4145253. Hope this helps!

Hello John,Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number PS4133229. Hope this helps!

Hello Jamie, Thanks for your question. The part number for the left-side handle support is PS4145248. I hope this helps.

Hello John, thank you for writing. This Freezer Handle Support part PS4145253 for your model is a white plastic piece with a hole in the center that is for the right side end of the Freezer Door Handle part PS4176693. The equivalent piece for the left side is part PS4145248. The silver colored piece you are referring to is the Handle End Cap part PS4158776 for your model. It is the same part on both sides but the part is sold individually. We hope this answers your question.

Hello Sarah, Thank you for the question. Very sorry but we just carry the part its self, not the tool. Hope this helps!

Hello Sara, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4158522. Hope this helps!

Hi Cheryl, thank you for your question. Those parts are not offered separately from the freezer door. So if you need to replace those parts you have to replace the door. I have linked the part below for you. Good luck with your repair.

Hello Beatriz, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS4145248. We hope this helps.

Hi Paula, Thank you for your question. The AA's on are important to help you find the correct parts and the part you have referenced in your question to us would be the correct part for your refrigerator. I hope this helps. Thank you and have a great day!

Hi Amanda, Thank you for your question. This part is white in color. There is a grey colored part that would sit in the door. The part number for both the reinforced cap handle is PS4145106. This part would be for both the left and the right side. To access the reinforced cap handle, you will need to remove the handle assembly. Before you begin any repair please unplug the appliance from the electrical outlet. Then open the freezer door. To access the part, you will need to remove the end caps from the top of the freezer door. Lift up on the end caps to release them and set them aside. Next use a Phillips screwdriver to remove the 2 screws that hold the retainers. Use a flat head screwdriver to get behind the retainers and push it out a bit. Once you have done this, you can use a pair of needle nose pliers to remove them. Once you have removed them, set them aside. Then take a flathead screwdriver and push the plunger in. Once you have it all the way in, lift up on the hinge assembly to remove it from the door so you can access the cap handle. We hope this helps. Thank you and have a great day.