Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BJ
November 4, 2019
Ice maker ejector does not return to home after ejecting ice cubes, only returned 1/2 way so it does not refill.
For model number ED25PWXAW00
Hi BJ,
Thank you for your question. If the ejector arm is not going back down after ejecting ice, it may be worn or there may be an issue where it is connected to the ice maker. If the issue is not where the part is connected to the ice maker, the ejector arm may need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
July 18, 2019
Is this ice maker kit compatible with our Whirlpool refrigerator model provided above. Thanks
Hello Brian, thank you for inquiring. This Ice Maker Assembly is not shown as compatible to your model. The replacement for your model is Ice Maker Assembly part PS11757273. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
28 days ago
Does this kit fit my refrigerator?
For model number Kenmore 106.56983601
Hello Mike, thank you for reaching out. This ice maker assembly is not compatible with your model. For your model, the ice maker and other parts are available separately. You may have to order the ice maker, part number PS11749920, the front cover, part number PS11752097, the shut off arm, part number PS12712096, the water line, part number PS11730901, and the water inlet valve, part number PS3497634. We hope this information is useful!
Hi L,
Thank you for your inquiry. In order to get the water inlet valve you will need to purchase the kit. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Nathaniel
November 19, 2018
I have acquired a Whirlpool model et18lkxhn0 refrigerator freezer and the back has rubber water inlet and word "ice magic". Inside freezer left rear is an electrical harness and water connection. I would like to purchaser an ice maker and install it in my freezer. The serial number is ej4914569. Can you please tell me the part number of the ice maker that will work in my freezer.Thank you.
For model number ET18LKXHN0
Hello Nathaniel, Thank you for the question. For the add on Ice Maker Kits, you will need to contact Whirlpool to see if they can provide the part number for the kit that is compatible with your model. Once you have the part number you can contact us back to see if it is something we carry. Looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Chad
July 30, 2019
What is the part number of the long wiring harness in this kit
Hi Chad,
Thank you for your question. Where the wiring harness is sold with the kit, the part number for it is not available. If you need the harness, you will need to purchase the ice maker assembly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Dennis
December 14, 2019
How do I stop this ice maker from making ice? The metal lever seems loose and does not shut off the ice maker when full it just keeps making ice.
For model number 1129316
Hi Dennis, you may need to replace the bail arm. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Brian
January 31, 2022
Is this an 8 prong electrical plug.
For model number WRT138FZDW00
Hello Brian, Thank you for the question. This shows to be a 4 prong plug. We hope this helps!
Was this helpful?
Thank you for voting!
Tyler
February 23, 2022
I have an Inglis 1RT184300 refridgerator. Can you confirm that this is the correct part number for a complete Ice cube maker assembly?
For model number 1RT184300
Hello Tyler, thank you for writing. Yes, the part PartSelect Number PS317560 you had chosen is compatible. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Vincent
October 4, 2022
What Ice Maker is correct for this model?
For model number Kenmore 596.79222013
Hello Vincent, thank you for your question. The Ice Maker, part number PS11765620, will fit your model. If you have any follow-up queries, please feel free to reach out to customer service. We are available seven days a week. Glad to be of help!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 16 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
not making or droping ice
repaired bin auger drum first didn't get plastic nut when I placed order so went to appliance center and bought nut. Tried old ice maker only made 2 cubes replaced icemaker now works great made my wife very happy.
I was lucky in that I already had an ice maker and just had to replace the unit. The parts and instructions were complete and easy to follow. Installation was a breeze with no concerns at all. The new unit is working flawlessly and we are very happy with the results. Thank you for supplying a quality replacement and excellent support via the instructions. The service was outstanding and I had my unit in about 3 days!!!
got the icemaker kit and started to add it to the frig found problems with the adaption to the frig in back for water filler tube but was able to make it fit. had to make a connection outside to water line with copper pipe added to hose with claps and saddle valve, turned it on and had leaks due to the schedule copper was the thin wall type, got thicker type and installed it, no leaks, started making ice. it was nice to get the right kit to make things work out. thanks
rich from racine, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ise Maker Broke
Followed the easy to read instructions and bingo in less than 15 minutes repair completed
Unplugged wire, loosened two screws on top took out lower screw.Lifted the ice maker up and out it came. The wiring that came with the new part was to short so we unplugged ours from the old part and used it:) was really easy and works great now no leaks
Brenda from Henderson, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old ice maker quit making ice
replaced ice maker with recommended add on kit. easy to replace exact replacement. used this company for washing machine part. parts correct both times.
Because of the age of the unit, I replaced all but the wire harness. It was easy to repalce.
Kelly from Taylorsville, UT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice.
This was really easy to do thanks to comments posted on the Partselect web site and the instructions included in the package. I removed three screws, unplugged the wire harness using a small screw driver to "unlock" the harness, removed the old ice maker assembly from the freezer, and reversed the process with the new assembly. Saved the valve and other parts for future use. The new unit started making ice within an hour or two. Very cool!
Miguel from Hollywood, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker broken
I had already removed the old Ice maker, so it was no longer in.
When the new ice maker arrived, I simply pluged it in, replaced the screws that hold it in place and turned the water back on to the ice maker. It was that easy.
Gloria from Folsom, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.3
Filter By Rating:
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Missy A - March 3, 2023
Verified Purchase
Ice maker Short lived
We purchased this ice maker in early August. It is now March 2 and it's already gone out! It's so disappointing! I'd be better off buying a new fridge at this point.
March 3, 2023
Hi Missy,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
★★★★★
★★★★★
James K - June 20, 2022
Verified Purchase
Easy-Peasy
I was surprised to find the ice-maker for a 20 year old (but good quality Kitchen Aide) fridge, but this one was it. Arrived and was a pretty simple install.
★★★★★
★★★★★
Ray B - October 23, 2018
Verified Purchase
Easy to install
This was the first time I tried to install an ice maker. It took me about an hour to install. Just be sure to follow instructions.
★★★★★
★★★★★
Robert D - August 10, 2018
Verified Purchase
FITS AND OPERATES PERFECTLY.
VERY PLEASED WITH PRODUCT AND SERVICE.
★★★★★
★★★★★
Richard S - April 11, 2018
Verified Purchase
Right part!!!
Everything received was right!! My son installed it, and it is working great!! Thank you so much for helping us out!! It was received in a timely manner and price was good! Thanks again!!
★★★★★
★★★★★
William P - February 8, 2018
Verified Purchase
Ice maker repair
This kit had everything I needed to complete my repair, it was the same kit that was on my refrigerator, the fridge is 17yrs old. ??
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS317560
Manufacturer Part Number: 1129316
