Water Circulation Pump WR57X10028

Hello Joshua, thank you for your question. Yes, If the water isn't being circulated through the unit the pump should be tested/replaced. I hope this helps.

Hello Dorothy, that is a great question. We do not deal with aftermarket or any other part unless it is directly from the manufacturer, we only deal in OEM parts. Hope this helps!

Hi Stacy, Thank you for your inquiry. Before beginning any repair, unplug the appliance from the electrical outlet or shut-off the circuit breaker. Unscrew the drain cap from the bottom of the reservoir and let the water drain out and remove the screw from the circulation pump shield. The drain pump is attached to the bottom of the reservoir. Disconnect the drain pump wire harness from the connection plug above the circulation pump. Remove the 2 thumbscrews from the reservoir and pull the reservoir out of the ice maker. Pull out the circulation pump shield and set it aside. Remove the circulation pump outlet tube then remove the screws from the pump mounting bracket and pull the bracket down to access the wire harness connections for the pump. Disconnect the circulation pump wire harness and the sensor wire harness from the connection plugs. Pull the pump and bracket out of the ice maker. I hope this helps. Thank you and have a great day!

Hello Phil,Thank you for contacting us. I suggest removing the pump and testing the terminals with a multi meter and check for continuity. Thank you for your inquiry, good luck with this repair!