Dishwasher Screw WD2X448

Note: The replacement 3rd level spray arm comes coupled with a new fixed mounting bracket . The arm rotates/pivots around this fixed bracket. Procedure: Un-hitch and pull dishwasher out from under cabinet. Pull back top sound blanket. Remove two screws that attach the old mounting bracket. These screws are located on each side of t ... Read more he water delivery hose where the hose enters the top of the dishwasher. Open the dishwasher’s door and remove (pull down) the defective 3rd level spray bracket and its mounting bracket. Install the new mounting bracket (with attached spray arm) by aligning the bracket’s attachment holes with the two holes where the two screws were removed from, i.e. hold the spray arm assembly in one hand while looking for the alignment from above he dishwasher. Once aligned, install the two screws. Straighten out sound blanket, push dishwasher back into place, and re-attach dishwasher’s under counter attachment screws/bolts.