GE/GE_Thumb/00116954i03.gif
See part 251 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element - Push On Terminals - 240V

★★★★★
★★★★★
111 Reviews
$79.67   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS249286
Manufacturer Part Number WB44T10011
Manufactured by GE
Product Description

Bake Element - Push On Terminals - 240V Specifications

The bake element in your oven provides the cooking heat. This part can be found at the bottom of your oven, and attaches to the power source on the back wall. It has two terminals that fit into the power source receptacle. This part is made of metal, and is approximately 20 inches in length and 18 inches in width. This product is sold individually. Many of our customers have rated this repair as easy. To complete this repair, simply lift the old element up and out of your oven, and replace it with the new one. Be sure to disconnect power from the oven before you begin this repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly | Oven is too hot
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore.
Part# WB44T10011 replaces these:
AP2030997, 820921, WB44T10011, WB44T10059
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

73 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melody
December 27, 2017
I can’t find this exact GE model part.
For model number JBP68MOK4BS
Hi Melody, Thank you for your question. GE will sometimes remove the zeros from their model numbers. If you are looking for part, you will find them under model number JBP68MK4BS. I hope this helps. Thank you and have a great day!

46 people found this helpful.

Was this helpful?
Thank you for voting!
Bobby
February 9, 2018
There is not a excat match on the model number. Will another model work? GE spectra.
For model number BP30WOB4WW
Hello Bobby, Thank you for your inquiry. The manufacturer takes the 0 between the W and the B out when searching for parts for this model, so the model number you would look under is JBP30WB4WW. We do show this bake element is compatible to your model. Hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Joan
August 24, 2017
Where do i get a multi-meter to test my stove top elements ???
Hi Joan, Thank you for your question. You could get a multi-meter at any local hardware store. I hope this helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Pat
January 4, 2018
This model does not show up any where. What model is compatible? My stove is over 9 years old. Is it time for a replacement? Burners are not as bright with most heat in the center.
For model number jbp68h0h2cc
Hi Pat, Thank you for your question. GE will sometimes remove the zeros from the model numbers. If you are looking for parts under your model number, you will need to reference model number JBP68HH2CC. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Larry
February 19, 2018
What oven element do i need for this model number? It is a GE spectra. Serial. Number ga41648q
For model number JBP26W0B4WW
Hello Larry, thank you for your question. The bake (lower element) is part number WB44T10011 and the broil (upper element) is part number WB44T10009. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
John
February 1, 2018
I'm looking to replace the oven heating element but i'm having trouble finding the correct part. Can you tell me the part number?
For model number JBP78WY1WW
Hi John, Thank you for your question. The part number listed for the bake element listed under your model number is PS249348. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Roy
December 18, 2017
I can't find a manual for this model. What is the part number for the bake element please.
For model number JBP82SOF1SS
Hello Roy, Thank you for your inquiry. This is the correct part number for the bake element for our model, WB44T10011. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Debbie
December 7, 2017
Will this work on model number jbp66eoh2bb?
For model number jbp66eoh2bb
Hello Debbie, Thank you for the question. Yes, This element is correct for the model number provided. It is the bake element on the bottom of the oven.This part is made of metal, and is approximately 20 inches in length and 18 inches in width.Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kate
November 27, 2018
Hi, The oven in one of my tenant's apartments as quit working. it is an older GE stove, but everything is fine, so i just want to replace the oven heating element and not the entire stove. the above model number is on the id tag in the stove, but i can't seem to find it in your inventory. is there another element that would work? thanks, kate
For model number BP23G V2WH
Hello Kate, thank you for your question. The bake element for your specific unit is part number PartSelect Number: PS249466. Please enter the part number into the site for current price and availability. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jim
January 2, 2019
Need oven heat element for this model GE range
For model number jbp78dod1cc
Hi Jim, Thank you for your question. There are 2 oven elements. The part number for the broil element or top element is PS249284. The part number for the bake element or the bottom element is PS249286. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 110 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
oven element burned itself up
Turned off circuit breaker to range.
Removed the 2 oven racks. Removed two screws in back of oven compartment. Pulled element forward and the terminal connections get exposed.
The right terminal clip disconnected by itself and the wire went back into the stove and could not be retrieved.
Removed range draw under the oven and pulled entire range out from wall about 4 feet.. Removed metal backing with a socket wrench and exposed the oven element wires and terminals.
Reinstalled new element and metal backing.
Since range was out from wall, cleaned and vacuumed before pushing stove back in place.
Since range draw was out re-leveled by setting adjustable feet.
Reinstalled drawer and racks.
Turned on circuit breaker.
Tested element by setting bake cycle on.
  • Dennis from Bondville, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WB44T10011
245 of 263 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The baking assembly in the oven burst into flames one day, then broke apart.
After the element cooled down, I pulled the racks out of the oven, turned off the oven at the breaker box, then, using a nut driver, loosened the screws that held the baking assembly in the back of the oven, and pulled the connecting wires off. I bent the wires to make sure they would stay out, because if they get back in the insulation, they are hard to find. I would recommend getting a pair of locking pliers and putting them on the ends of the wires just to keep them from getting back into the insulation. Then I attached the left connection wire and then the right one, pushed them back into the insulation, tightened the baking assembly to the back wall of the oven, turned it back on at the breaker box, then tested the oven to see if it heated up. It did. Total repair time 15 -20 minutes. Would have been less if I didn't have to chase one of the wires back in the insulation. Shamless plug for the company ...By paying extra for 2-day shipping to receive the part, I saved just over $20 from buying it at Sears, which would have had to order the part anyway.
  • Theresa from Sherman, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
  • Parts Used:
    WB44T10011
131 of 135 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out
removed the oven racks. used a 6.5 mm socket to take out two bolts. pulled out old element and wires through insulation into oven. i used caution during this part i didn't want the wires to disconnect and fall into the oven. once the wires and element was pulled out approximately 3 inches. i used two magnet clips that hold papers onto the refrigerator and clipped both wires so they wouldn't go back into the stove. disconnected the element from the wires and connected the new element to the wires. pushed wires into the back of the oven and tightened the two 6.5 mm bolt. done in 10 minutes. turned oven on to 400 degrees and let same pre heat. a little smoke will come from the new element which is normal. works fine now.
  • russell from hampstead, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WB44T10011
68 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element broken
After I got the right part(I ordered the wrong one at first, my fault) it was simple to remove the old element, 2 screws and push on termilnals, and replace with perfectly fitting new part. Word of caution, turn off the breaker to stove. I found that the element line is hot even if the control is off!
  • Robert from Sussex, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WB44T10011
47 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking element and dual stovetop burner were fried
Baking element:First, turn off your breaker so you don't get injured. Using a small nut driver, remove the two screws that hold the element into the back of the oven. Once the screws are out, the element slides out, toward the oven opening. Be careful not to pull too hard, or the wires could disconnect from the back and be difficult to retrieve. Once the wires are exposed, disconnect them from the terminals. Attach them back to the new element, and put it back in. EASY For the stovetop, this is a glass top, so the burners are underneath. There are two small screws on the underside of the stove top, where the oven door closes. Remove those screws and then lift the front of the entire stove top. It will hinge at the back. There are two screws and little metal brackets that hold the burner in place. Remove those screws and brackets, disconnect the wires, and be sure to remember which wire goes where. Reattach the wires and screw the brackets back into the burner. Refasten the stovetop and you are good to go.
  • Matt from Westr Grove, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WB30T10130, WB44T10011
37 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The heating element for our GE oven cracked
I (1) pulled the oven away from the wall to get the back of it exposed. Then I (2) pulled the plug out to make sure there was no electrical current. Then I (3) opened the oven door and tugged on the broken heating element to see how tightly it was connected in the back of the oven. Next I (4) went to the back again and slid the silver-colored metal cover that protected the exposed electrical wiring for the oven. I (5) observed that there were a number of different colored wires held in place by screws as well as some wires that disappeared into the insulation, so I (6) went back to the front of the oven and pushed the broken heating element backward to determine if its wiring would become visible from the back of the stove. I (7) observed from teh back that it did. From that point, I (8) pulled the heating element's wiring connections through the insulation until it was visible. The I (9) unscrewed the two nuts connecting the heating element to the oven's wiring. Then I (10) went back to the front and pulled the broken heating element out and (11)inserted the new heating element. Then I (12) returned to the back and connected the loose wires to the heating element and (13) pushed the heating element forward into the oven. I (14) went around to the front to ensure the heating element was positioned the same way in the oven as the old one was, then in the back (15) replaced the metal shield over the wiring and isulation, (16) plugged the oven back in and (17) turned the oven baking setting on to a high temperature to test the new element (i.e., that it was connected correctly and actually worked). I (18) observed that the oven began heating up quickly to the proper temperature, and I was greateful the new bake element worked as good the original part. I then (19) turned the oven off and pushed it all the way back to its place against the wall.

The repair job was not effortless (about 15-20 minutes) but was simple enough NOT to require an electrician. The most difficult part was physically sliding the stove out and back into its tight place between our counters.
  • Matthew from Arlington, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
  • Parts Used:
    WB44T10011
20 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking (Lower) element burnt out
Unplugged unit. Removed racks from oven. Removed screws from bracket holding element in. Carefully pulled element forward until the wire connections were exposed. Removed wires taking care not to let them retract into the oven. Removed element from oven. Placed new element in oven. Connected wires to element. Replaced screws to hold element in. Replaced racks. Plugged in oven. Turned on to see if working.
  • Andrew from Northport, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    WB44T10011
18 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Baking Heating Element Cracked and Burnt out
Pulled the oven out of it's location. Disconnected the power cord from the Electrical Outlet. Removed the Protective back plate (from the rear of the oven) which covers the wiring. Disconnected the two leads that connect the Baking Element. Went to the front of the Oven, opened the oven door, removed the two screws with a socket wrench (you can use a screw driver as well), at this point you can replace the element with the new one and secure with the two screws. I then went back to the rear of the oven and reconnected the two wires back onto the new heating element and replaced the wiring protective back plate. Reconnected the power cord to the electrical outlet and turned on the oven to see if the element heats up. AND IT DID. Moved oven back into it's original location and I was done. This took 16 minutes to do and saved me a nice amount of money. I could have had a service person show up and do this work which would have cost me $189.00 (Parts & Labor) to have done and all I spent , by ordering the part from PARTSELECT.COM, was just under $50.00.
  • David from Holiday, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    WB44T10011
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove not heating properly for baking. Since unit is 13 years old, I decided to replace both heating elements and temperature sensor.
Turned off breaker for stove. Pulled stove from wall and turned it to access back. Unplugged cord for better movement of unit. Took off back panel exposing connecting wires and disconnected them all. Unscrewed element and sensor screws using small socket wrench and removed from oven. Replaced three items and rescrewed. Went to rear of stove and reconnected all wiring. Moved stove to plug back in and turned oven on. Everything worked fine so I let the unit cool for 20 min to 1/2 hour. Replaced back panel and pushed stove back in place. Fairly easy repair. DO NOT lean on oven door! Oven will tilt forward with enough pressure.
  • Stephen from CAPE CHARLES, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Bake Element
I order the part online on the 23rd of February 09 in the afternoon it was delivered on the 24th to the address in Florida and then fedex to me in Cayman. So I got it on the 2nd of March went home that evening after work got my pliers unpluged the stove removed the two screws that holds the element in place. I also removed the metal from the back of the unit first to make sure I was doing it right. I then pulled the element at the back and disconnected the two wires replacing it with the new one. I then replaced the back and screws and pluged it in turned on the oven waited and when I saw it turn red I felt so good. I said thank you Lord and then baked a cake. The whole installation took about 20 mins.
Thanks again.
P.S. please look into offering shipping orders overseas.
  • Fee Fee McLean-Ebanks from Sarasota, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
  • Parts Used:
    WB44T10011
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
111 Reviews
4.9
Filter By Rating:
  • 5 Stars
    102
  • 4 Stars
    7
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS249286
Manufacturer Part Number: WB44T10011
Brand
Model Number
Description
General Electric
15891
Range - Electric Range
General Electric
15891 1
Range
General Electric
158911
Range
Kenmore
91195852991
Range
Kenmore
91195857991
Range
Kenmore
91195859991
Range
General Electric
ECBP70SK1SS
Range - Electric
General Electric
ECBP70SK2SS
Range - Electric
General Electric
ECBP70SK3SS
Range - Electric
General Electric
ECBP70SK4SS
Range - Electric
General Electric
ECBP70WK1WW
Range - Electric
General Electric
ECBP70WK2WW
Range - Electric
General Electric
ECBP70WK3WW
Range - Electric
General Electric
ECBP70WK4WW
Range - Electric
General Electric
ECBP82BJ1BB
Range - Electric
General Electric
ECBP82BJ2BB
Range - Electric
General Electric
ECBP82BJ3BB
Range - Electric
General Electric
ECBP82SJ1SS
Range - Electric
General Electric
ECBP82SJ2SS
Range - Electric
General Electric
ECBP82SJ3SS
Range - Electric
General Electric
ECBP82SK1SS
Range - Electric
General Electric
ECBP82SK2SS
Range - Electric
General Electric
ECBP82WJ1WW
Range - Electric
General Electric
ECBP82WJ2WW
Range - Electric
General Electric
ECBP82WJ3WW
Range - Electric
General Electric
ECBP82WK1WW
Range - Electric
General Electric
ECBP82WK2WW
Range - Electric
General Electric
ECBP85WJ1WW
Range - Electric
General Electric
ECBP85WJ2WW
Range - Electric
General Electric
ECBP85WJ3WW
Range - Electric

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service