Single Heating Element Support Clip WB2X9719 | Official GE Part | Fast Shipping | PartSelect
Single Heating Element Support Clip – Part Number: WB2X9719
Single Heating Element Support Clip – Part Number: WB2X9719 Single Heating Element Support Clip – Part Number: WB2X9719 https://partselectcom.azureedge.net/Schematics/GE/00010095i03.gif

Single Heating Element Support Clip

Product Description

Single Heating Element Support Clip Specifications

The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this replacement should be the solution. The tools needed for this project are slip joint pliers. For safety precautions, make sure to unplug your range from the power source, or shut off the house circuit breaker before starting this project. Refer to the installation instructions for best results and accuracy.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part works with the following products:

Range, Wall Oven, Microwave Oven Combo.

This part works with the following brands:

Kenmore, General Electric, Hotpoint, Roper, RCA.

Part # WB2X9719 replaces these:

251560, 285840, 324808, 334565, 339593, 4334357, 4337249, 4338587, 8004768, AP2014510, WB02X9438, WB02X9576, WB02X9719, WB2X9438, WB2X9576.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Part Videos

Replacing your Kenmore Range Single Heating Element Support Clip

Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 15 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Paul from Canton, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
Parts Used:
WB44X173, WB2X9719
broiling element had burned through, req. its replacement
First I removed the two screws that hold the element in place. I also removed a screw that held one end of a support bracket. I then pulled the element out about 3 inches and disconnected the two wires. Reversing these steps, I finished the element's replacement.

I had noticed that the former element was sagging at the front end. I installed the additional clips (not original) on each forward end of the element for additional support.
37 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Stanley from Sulphur, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
8009, WB44K5012, WB2X9719
Bake element bad
Inside oven, remove two screws that hold element to back wall, pull element out three or so inches to get to wire clip connections, unclip wires, remove bad element, put new element in in reverse order of taking out bad element, just that simple. Also this site was so easy to use, plus the shipping time was unbelieveably short, even a company service man couldn't have been that quick, or as reasonable. Thanks a bunch!!
13 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Victor from Miami Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WB2X9719
Heating element dangling
Snapped in the clip
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Gerald from Redondo Beach, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WB44K5009, WB2X9719
The upper element for broiling went kaput!
The two dollar socket set from Xmas 20 years ago had the right size socket..

Long arms are advisable.

The lower element still plugged in while the upper wires were just hanging there surrounded with fluffy white insulation fuzz, I wondered, " Could I bake a potato for my yearning and hungry family?"

When I explained the situation to my retired father in Arizona he said simply, "I wouldn't."

The new element popped in. It got really red, and, kinda like watching my toaster toast, the show was pretty much over after it heated up.

Shalom and Merry Christmas Folks!
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Harald from Port Washington, NY
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
349241T, 341241, 279408, WB2X9719
Dryer old and worn out
Dryer started making noises years ago. Finally it was intermittently starting, then...didn't start at all. It made a buzzing noise, like the motor was in over-torque. Then it over heated and wouldn't do anything until it cooled down. Then the cycle started all over again. I thought it best to change out all the worn parts. Found the belt, the rear seal, the rollers and motor all needed to be replaced. All were very simple to do. Followed the instructions and videos from others located on this site.
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Marion from METHUEN, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WB2X9719
Single Heating Element Support Clip was needed to hold up the heating element in the oven. Old single heating element support clip broke and came out of the hole.
Simply inserted the clip into the hole in the oven. It took less than 20 seconds. :D
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
James from Hedgesville, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WB2X9719
heating element clap broke off
All I had to do was pop the clamp on the top part of the heating element and push the clamp into the hole.
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
ANNE from FT. LAUDERDALE, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WB44X232, WB2X9719
Broiler element would not work.
Removed the old element: removed clips holding the element, unscrewed the 2 screws that hold element in place. On the back of the range, removed casing to get to the connection wires, disconnected the element then removed the element. Reversed procedure to replace. Thanks for the speedy ordering and delivery.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Joseph N from Hazletownship, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
WB64K5051, WB2X9719
Rusted burn box
I simply removed drop in range and removed screws holding burn box and installed new box. Total time was approxmately !hr.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
David from SALISBURY, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
WB2X9719
The old single heating element support clips came loose over time.
I ordered the replacement clips from this site and they arrived in a timely manner. The clips were perfect, but due to the age of the oven, the holes had elongated and the new clips kept falling out also. I modified the clips by widening the tips with a pair of pliers. They are holding just fine. I don't think the older clips could've withstood the modification.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
6 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS243701
Manufacturer Part Number: WB2X9719
Brand
Model Number
Description
Kenmore
1034688610
Range
Kenmore
1036208511
Range
Kenmore
1036268412
Range
Kenmore
1036348412
Range
Kenmore
1036408412
Range
Kenmore
1036408413
Range
Kenmore
1036408710
Range
Kenmore
1036417610
Range
Kenmore
1036417611
Range
Kenmore
1036417612
Range
Kenmore
1036427510
Range
Kenmore
1036427540
Range
Kenmore
1036427560
Range
Kenmore
1036427610
Range
Kenmore
1036427611
Range
Kenmore
1036427612
Range
Kenmore
1036428412
Range
Kenmore
1036428413
Range
Kenmore
1036437710
Range
Kenmore
1036447710
Range
Kenmore
1038357210
Range
Kenmore
1038357211
Range
Kenmore
1038357212
Range
Kenmore
1038357220
Range
Kenmore
1038357221
Range
Kenmore
1038357222
Range
Kenmore
1038357240
Range
Kenmore
1038357241
Range
Kenmore
1038357242
Range
Kenmore
1038357260
Range