EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖
Sign In | Create Account
| Your Account
Back
Back
Back
Keep typing for more specific results...

Shop by Department

See All >
Appliance Parts & More Appliance Parts & More Lawn & Garden Parts Lawn & Garden Parts Heating & Cooling Parts Heating & Cooling Parts Power Tool Parts Power Tool Parts Patio & Yard Parts Patio & Yard Parts BBQ & Grill Parts BBQ & Grill Parts Small Appliance Parts Small Appliance Parts Help me find my model number Help me find my model number

Top Appliance Brands

See All >
Whirlpool Parts Whirlpool General Electric Parts General Electric Samsung Parts Samsung Frigidaire Parts Frigidaire

Top Lawn Equipment Brands

See All >
Toro Parts Toro Briggs and Stratton Parts Briggs & Stratton Husqvarna Parts Husqvarna Craftsman Parts Craftsman
Keep typing for more specific results...
Price Match Guarantee
Fast Shipping All Original Manufacturer Parts Genuine Quality 1 Year Warranty
Easy
241985-1-M-GE-WB2X2058 -Door Gasket
Part Location Diagram of WB2X2058 GE Door Gasket
See part 534 in the diagram
241985-1-S-GE-WB2X2058 -Door Gasket 360 view
( Grid squares measure 1x1 inch )
241985-1-S-GE-WB2X2058 -Door Gasket 241985-2-S-GE-WB2X2058 -Door Gasket 241985-3-S-GE-WB2X2058 -Door Gasket 241985-1-S-GE-WB2X2058 -Door Gasket 360 view
Part Location Diagram of WB2X2058 GE Door Gasket
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

customerservice@partselect.com

Door Gasket WB2X2058

 Fits your 1045!

Easy 

15 - 30 mins 

Rated by verified customers
$ Price Match
OEM badge Official OEM
$ 111.62
  Special Order
 Fits your 1045!
PartSelect Number PS241985
Manufacturer Part Number WB2X2058
Manufactured by GE for General Electric, Hotpoint

Jump to:

Product Description

Door Gasket Specifications

Are you struggling with an underperforming or leaking engine? Don't worry! With the Briggs and Stratton Engine Gasket Set, you can bring your engine back to top form. This total package delivers all the gaskets you need for a tight, faultless seal - a key component in maintaining your engine. Being a direct fit, it ensures an easy and seamless installation. Crafted from top-tier materials, these gaskets can withstand extreme heat and exposure to combustion fluids. This means your new gaskets will stay in great shape, keeping your engine running smoothly for longer. Each gasket in this set is meticulously engineered by Briggs and Stratton - a respected name in precision and durability. When you choose the Briggs and Stratton Engine Gasket Set, you are not just replacing parts, you are committing to quality that will extend your engine?s lifespan. Your engine will thank you for it with improved performance and efficiency! Trust Briggs and Stratton, because when it comes to giving your engine a fresh lease of life, you deserve nothing short of the best. Note: Please ensure to check your engine model for compatibility before purchasing.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Why buy the real thing?

OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.

  • OEM from PartSelect
  • Genuine brand name
  • Guaranteed to fit
  • Superior quality and durability
  • 1 year warranty
  • Generic
  • Unknown manufacturer
  • No fit guarantee
  • Inconsistent quality and lifespan
  • Limited warranty and support
Back to Top
You May Also Need ?
Bake Element - 220V 2300W
$52.67
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$22.52
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$20.36
  Special Order
Affresh Washing Machine Cleaner Tablets – 6 Count
$28.42
  In Stock
Produce Preserver Filter
$18.22
  In Stock
Refrigerator Deodorizer
$31.58
  In Stock
Affresh Ice Machine Cleaner
$27.36
  In Stock
Back to Top
Troubleshooting
This part works with the following products:
  • Range
  • Wall Oven
Part# WB2X2058 replaces these:
AP2010255, 248261
Back to Top
Installation Instructions
 Average Repair Rating: 3.9 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace door gasket on very old wall oven
Repair went a lot faster and easier than I anticipated. Instructions are similar to those posted by others.
1. Verify that new gasket looks mostly like old gasket as best you can since not all of old gasket is visible.
2. Shut off circuit to oven (optional, but good practice)
3. Remove racks, trays, etc from oven to reduce weight at Step 7
4. Remove oven door by partially opening door to broiler position (about 20 degrees). Door should catch and stay open on its own. Slide up and lift off door. The “hinges” are spring loaded so carefully return them to closed position so they won’t snap shut on fingers.
5. Remove Phillips screws, one on each side wall of oven liner.
6. Remove two hex screws and metal gasket-holder on top center of oven liner.
7. Pull and slide oven liner out of oven mainframe about 1/4 “ to 3/8”. This may be the most difficult part of the job.
8. If possible to remove just a couple of inches of one bottom of old gasket (right side is easiest), verify that the cross-section profile of both old and new gaskets are essentially the same. If not, you have the wrong gasket.
9. Pull and remove old gasket. If gasket is dry and cracking, it may be necessary to scrape it out with putty knife, flat-blade screwdriver, etc. if it has fused to metal over the years. Note how it was installed on the metal edge of the oven liner.
10. Locate the mid-point on the new gasket length and begin inserting it at the top-center of the oven liner where you removed the two hex screws. Continue installing along both left and right sides of the liner. Each end of the gasket should extend to just above the respective hinge. No trimming should be necessary. Ensure a snug fit all along each side and top.
11. Push liner back into oven mainframe. Replace Phillips screws, gasket-holder, and hex screws.
11. Pull out each hinge to broiler position.
12. Replace door by sliding down onto hinges. Close door and check for tight fit against gaskets. Gaskets will flatten somewhat over time
13. Restore power, racks, trays, etc.
Read less
  • r from SUNNYVALE, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The gasket needed to be replaced in top oven, it was brittle and broken.
We took out the philips screws on the right and left side of inside of the oven and two hex head screws on the clip on the top of the oven in the front. Then using a slot screw driver pryed the oven liner out enough to remove old gasket and replace the new gasket. We did see in some online directions that we were suppose to remove entire oven from cabinet and loosen bolts in the back. But, we were able to get enough space to get the old gasket out and new one installed. We did use a 1/4" thick piece of wood on face of oven to prevent any denting of oven when prying out the liner of the oven.
Read less
  • JoAnn from Auburn, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
19 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gasket around rim of oven broke while cleaning
Son-in-law unscrewed oven compartment; broken gasket was easy enough to remove and new gasket easy to replace; only problem was oven door would not shut tight. Tried shoving gasket harder into groove, tried turning on oven and heating new gasket to see if it would soften. Finally got it to close by pushing hard on left side of oven and inside light would at least go off and stay off.
Read less
  • Dorothy from Santa Rosa, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Gasket Worn and Brittle
Took oven door off. Removed screws that were holding oven insert. Pulled out oven insert. Removed old gasket. Installed new gasket. Push oven insert back. Installed screws. Replaced oven door.
  • Karen from Yakima, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS241985
Manufacturer Part Number: WB2X2058
Brand
Model Number
Description
General Electric
10420-1
Range
General Electric
10420-2
Range
General Electric
10421-1
Range
General Electric
10421-2
Range
General Electric
10421-3
Range
General Electric
10431-1
Range
General Electric
10431-2
Range
General Electric
10431-3
Range
General Electric
10441-1
Range
General Electric
10441-2
Range
General Electric
10441-3
Range
General Electric
10451-1
Range
General Electric
10451-2
Range
General Electric
10451-3
Range
General Electric
10460-1
Range
General Electric
10460-2
Range
General Electric
10460-3
Range
General Electric
10461-1
Range
General Electric
10461-2
Range
General Electric
10461-3
Range
General Electric
10470-1
Range
General Electric
10470-2
Range
General Electric
10470-3
Range
General Electric
10471-1
Range
General Electric
10471-2
Range
General Electric
10471-3
Range
General Electric
10477-1
Range
General Electric
10477-2
Range
General Electric
10478-1
Range
General Electric
10478-2
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

1-866-319-8402 Monday to Saturday
8am - 8pm EST

Contact Customer Service
Door Gasket
$ 111.62
  Special Order
✖
Stock Status
 In Stock

Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.