This is a 240-volt surface burner infinite switch for a range or oven. It is for an 8-inch element. This part turns your surface element on and off, and regulates the desired heat of your element. The switch is made of off-white plastic and metal.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JOHN O - August 3, 2023
Verified Purchase
worked as expected
came in good condition. had a little bit of a time figuring out the wire connection but studied it and got it right. thanks
★★★★★
★★★★★
Scott L - August 17, 2021
Verified Purchase
works great
staff was very helpful thanks
★★★★★
★★★★★
Juan G - May 21, 2020
Verified Purchase
Simple Replacement
The part was exactly what I needed to repair the stove. I've used parts select in the past also
★★★★★
★★★★★
Martha S - November 18, 2019
Verified Purchase
Perfect fit, easy to repair.
The switch we needed came quickly and was in perfect condition. Once we figured out which wire went to which post and put things back together again (about a 15-20 minute job), our burner worked perfectly. If you have a burner that is going from low temperature to ballistic on it's own and refuses to play nicely, and your range model is recommended by the model search (this was for the front right burner on our model, make sure you're getting the right one), give this a try. This will be the first Thanksgiving in three years in which all burners on our stove can be used. Wish we'd done this years ago. So easy once we figured it out!
★★★★★
★★★★★
TONY P - March 30, 2019
Verified Purchase
Updated part easy to install
The switch works very well.
Easy to install.
★★★★★
★★★★★
Rolando G - February 26, 2019
Verified Purchase
Easy Repair
The part works perfect.
★★★★★
★★★★★
Abram L - December 27, 2018
Verified Purchase
A little different!
It was a little different from the orginal one from how the fuses plug in but they all had a spot where everything plugged into pretty common sense...
★★★★★
★★★★★
John S - September 14, 2018
Verified Purchase
Part functions correctly but ...
The part works fine but there was some grief involved since the terminals on the switch did not match the original part. A simple mapping of which terminals on the new switch matched which terminals on the old switch would have been most helpful.
★★★★★
★★★★★
Darlene K - August 25, 2018
Verified Purchase
Easy repair
When I ordered the part, I was told there was 1 in stock and that it would be shipped the next day. When I didn’t receive a tracking number(5 days later) I called and was told that the part was on back order from the manufacturer. I eventually received the part and I guess that’s about all you can ask for, in this day and time.
★★★★★
★★★★★
Joe H - August 17, 2018
Verified Purchase
Part was different size and at first I didnt think it would work
I looked with a magnifying glass and the terminals were marked similar to the old one so I was able to wire up the new switch. I was not sure it would work but it did, the wires were all in different locations and the new switch seemed to be made for a plug in which my range did not have. I am happy that it worked.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No power to burner until after dial setting 3 reached and would not reach highest setting.
1. Remove all four control knobs. 2. Unscrew all four plastic "nuts" found under each knob holding front panel to stove. 3. Lift front panel off. 4. Removed all Phillips screws holding metal shield to which control switches are fastened. 5. Lift entire assembly up. 6. Remove two screws
... Read more holding bad switch to metal shield. 7. BEFORE REMOVING ANY WIRES LABEL EACH WIRE ACCORDING TO CODE EMBOSSED ON BACK OF BAD SWITCH. These will be H1, H2, L1, L2 and P. They are not in the same place on the new switch as they are on the old one. The reason for labeling is that in case you make a mistake you have this back-up to go by. Also to double check your finished job.If just one wire is connected to the wrong terminal a disaster will happen. 8. Remove each wire, one at a time from the old switch and connect it to the correct terminal on the new switch as indicated by the codes on the back of the new switch. When done double check to be certain the labels on each wire match the code for the connected terminal. 9. Slide furnished bushing onto the new switch. 10. Insert new switch through the back of the metal shield and attach with the supplied screws. The old screws were too short in my case so be certain to use the ones supplied with the new switch. 11. Re-attach the shield assembly to the stove. 12. Install the front panel back over the switch stems. 13. Secure the front panel with the four plastic nuts. 14. Install the control knobs. 15. Test the new switch.
Read less
Ronald from FRENCH VLG, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Range eye stayed on
Turned off breaker to range then removed all element control knobs. Unscrewed retaining collars I suppose is a good word removed panel. Then removed bad switch installed removed one wire at a time and placed on new switch in proper places. Reassembled in reverse order turned breaker back on worked perfect.
Billy from Kingsport, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
January 12, 2018
The r front burner now only stays on the highest setting is this the part to correct that
For model number FES366ECF
Hello Mike, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS820835 for the right front dual burner switch. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ted
April 7, 2018
Wiring diagram from old switch to new stile switch
For model number fes367dsc
Hi Ted, Thank you for the question. Very sorry but we do not currently have a wiring diagram, but the Black goes to L1, Red to L2, Yellow to H1, Yellow to H2, and Orange to P. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Usain
November 1, 2019
Hello, the left front burner now only stays on, is this the part to correct that. (the burner is 9 to 10 inch ). Thanks
For model number CFES366FC4 / PART NO:PS2350014
Good Day Usain. Thank you for your question in regards to your unit (Model Number CFES366FC4). Based on our research you may need to replace one or more of the following parts: 1) Element (PartSelect Number PS1528767). 2) Surface Burner Infinite Switch Kit (PartSelect Number PS2350013). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sean
November 20, 2019
Can you find the part numbers for control switches for both small and large burners for my model? I’m only seeing the 8” switch number. Ty
For model number 790.46582501
Hi Sean, thank you for your question. Here are those two parts for you: PS2350013 and PS2350014. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Janie
October 4, 2023
Front right large burner turns on to high only. What switch do I need to correct this? Thank you.
For model number 79046579400 Kenmore
Hello Janie, thank you for your inquiry. If the burner is on a high setting only, you may need to replace the surface element switch, part number PS2350014, to fix the issue. It is for an 8 inches element. This part turns your surface element on and off and regulates the desired heat of your element. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gene
February 12, 2019
Will the ps2350014 switch fit for the 6" burner as well as the 8" burner? Thanks
For model number fes365ebd
Hello Gene, Thank you for your question. PS2350014 works with the back left burner on the cook top. Have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
June 4, 2019
Is this the part for big right front burner? My range f r burner stays on until i turn off breaker.
For model number Fridedaire FES367DSC
Hello Mark, thank you for writing. Yes, this is the Switch for the right front Burner on your model and should fix the issue.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
December 26, 2019
Kenmore range. Are all four switches the same? I'm having issues with the back left one. Difficult to turn on, then it will not turn off.Thanks
For model number 79046593500
Hi Joe,
Thank you for your question. Not all of the switches are the same. The switches for the left and right rear burners are the same. The part number listed under your model number for the left and right rear burner switch is PS2350013. The part number for the left front burner switch is PS2350014 and the part number for the right front burner switch is PS820835. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Fred
May 20, 2022
The left switch of my Kenmore electric range model 790.46354400 doesn't work properly. When I put it to 'OFF', it doesn't shut off the big element on the left. It shuts the element off when I switches it to '8'. Do you think it's a switch problem? If so, what is part number of the switch I should purchase? Thanks!
For model number 79046354400
Hello Fred, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2350014. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Joseph
November 16, 2022
right rear control switch will not shout off
For model number 790.45074400
Hello Joseph, thank you for reaching out. We have researched your model and found that the issue is likely with the Dual Infinite Switch, part number PS820835. This switch controls the dual surface element. If you require assistance to place an order, please contact customer service. We hope that helps!
