This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint.
Part# WB24T10153 replaces these:
AP4363783, 1473855, WB27T10384
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
15 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hsiao
May 16, 2019
Can i use wb24t10153 to replace surface element haliant 12 inch dual,control switch ?
For model number jcbp810st1ss
Hello Hsiao, thank you for your question. Yes, this Surface Burner Switch is for the 12" Haliant Element on your model.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
October 8, 2017
Element turns on hot only and cannot adjust lower and this is for part # 19 in the diagram not # 22 in the diagram. I believe part # 19 & part # 22 are different.
For model number JB645DT1WW
Hi Ed,
Thank you for contacting us. If you are having that sort of issue you should check your switch and your burner to see which one is not working correctly. If you are looking at the diagram, part 19 is your furthest left knob. So if that is the knob that controls the burner that is giving you issues, then that would be the one that you want to check. Part 22 is the knob to the right of part 19, next to your clock. They are different switches. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Azad
February 25, 2019
Sir:The right dual burner switch (for inner or outer) burners does not adjust down to low temperature controls; sets to red hot high all the time and do not "cool" down after a while like the other burners do. since both rings of dual burners stay hot at any control, i think it is a swith problem. the single knob on the outside controls both (of the dual) burners depending on left or right turn movements. what part do i need? thanks a miilion.
For model number JBP84TH2WW
Hi Azad, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 11, 2019
This is a follow up from my last question i was wondering what part number controls the front left burner as well as the bridge burner on the left. The control knob works both burners. Thanks for the help,
John
For model number JBP84SH1SS
Hello John, Thank you for contacting us. Upon reviewing the model provided we show the front left is part of the bridge burner. The control switch part number is PS226422. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alex
March 14, 2018
The large burner on the right when i turn the switch on it get very hot but after a place a pan 3 seconds after it will turn off
For model number GE690EF2ES
Hi Alex,
Thank you for your question. Well there are only two parts that could cause your burner to fail. I would suggest testing your element itself or your switch to see if they are working correctly. You can use a multi meter for that. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathryn
November 13, 2018
Can i order just the double flat shaft? It looks like the little metal part sticking out of 19.) it is absolutely all i need.
For model number JB655DT1WW
Hello Kathryn, thank you for your question. Unfortunately, the shaft is not sold separately. The shaft and switch are all one unit and have to be ordered as such. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Young
December 12, 2018
We purchased said model oven 2 years ago from home depot. One of left front large burner(dual burner) is not working so that tested by technician and said dual burner switch. I called your part customer service and said the switch part number is wb24t10153 for big burner. Is that correct ? if so how can I order the part. Thanks.
For model number JB650SF4SS
Hello Young,Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS2339825 (Manufacturer Part Number WB24T10153). You can enter the part number into the website and there will be a add to cart button to proceed with the order. You can pay with Credit card or PayPal on the site. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Claudia
September 16, 2019
Range immediately tripped circuit when turned on second burner. Circuit breaker would not reset until range unplugged. Would this be bad burner switch or something else? Burner is dual size burner left front of stove. Right front was other burner that was on at time circuit tripped. Stove is 3-4 years old and never had this problem in past.Thanks,
claudia
For model number JB650DF4WW
Hello Claudia, thank you for writing. This may be due to the 9" Dual Radiant Element itself, part number PS2321567 for your model, or this Surface Burner Switch part number PS2339825. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
October 28, 2019
Every burner on this stove has the same problem. They only run hot . There is no controlling the temperature. This stove is great at boiling water, but that is all. Could it be possible that all the switches are bad? What part numbers do i need to replace?
For model number JBP84BK1BB
Hello Jeff, Thank you for the question. Normally this indicates an issue with the switch that controls the element. PartSelect Number PS2339825 (2 required), PS236754 (1 required) and PS236780 (2 required), but with all burners having the same issue I suggest checking the wiring first. Hope this helps!
Does this part control the front burner and the bridge burner as well ???? will this part fit my GE model # jbp84sh1ss ???? thanks for your time,
john
For model number JBP84SH1SS
Hello John, Thank you for contacting us. The part number that controls the front right burner is PS243902. The bridge burner is controlled by part number PS226422. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your General Electric Range Surface Burner Switch - 240V
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Knob stem broke off.
Pulled stove out to access back panel. Unscrew broken switch/stem. Replaced each wire one at a time to make sure they went in right spot. Screw in new switch. Replaced back panel.
DALE from FREMONT, NE
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke off of the front of GE Cafe electric range
Slide range out. Remove screws holding back vent in place. Remove back vent. Remove screws under front panel and knobs. Lift glass cooktop. Remove screws holding switch in place (behind knob) unplug each wire from switch and immediately replace in same spots on new switch. Replace everything.
Kristosser from Sparks, NV
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
27 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Phantom burner activation when switched off!
Scary when stove burner comes on by itself, was turning breaker off for safety! GE website not helpful at all. PartSelect website enabled diagnosis of problem and then provided easy source for replacement switch. PartSelect has schematics: all I had to do is unscrew the back of control panel, unscrew offending infinite switch, hook up replacement switch same way, put panel back and done. GE service call starts at $80 and then who knows what kinda $$$? Did repair myself: cost just $38. Yay!
Peter from Phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
10 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
new tea kettle burned out both the element and the control
After replacing the dual element and still having a problem with the range, I started troubleshooting the switch. Fortunately, our range has 2 dual burners, and the switches are the same, so I was able to move the switch and see the problem follow the switch (also, using a VOM, I could tell there was a short in the switch). Since I'd already replaced the element, I only had to work on the controls, which are very easy to access. I carefully documented all the connections (took a couple of pictures as well), and swapping out the switch took almost no time. Lesson learned - follow the manufacturer's requirement to use only cookware with a flat bottom. This tea kettle only sat flat around the outside edge. That caused both the element and switch to blow. The "hot cooktop" light stayed on constantly, even after the element was replaced.
Dwight from Warrenton, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
8 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
5.0
Filter By Rating:
5 Stars
6
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ron B - June 3, 2021
Verified Purchase
EZ fix
Now I need a new burner !
★★★★★
★★★★★
Sam H - December 26, 2020
Verified Purchase
Switch
Switch was the correct one and easy to install
★★★★★
★★★★★
Sandra F - March 26, 2020
Verified Purchase
The part was the right one!!
I watched some YouTube videos to see what was wrong with my electric stove. Then after I knew what it prolly was, I wasn’t sure if I had the right switch tho. There wasn’t a pic of it on your website, maybe the only one that wasn’t. I went to the Q&A on that switch piece and figured it was the right one! That’s the only way I knew for sure it was the right part for my stove!! It’s a GE and it is 13 years old and now with the right part, it’s still going! Yay!!!! Ty
★★★★★
★★★★★
Allan G - January 17, 2019
Verified Purchase
correct part
appliance fixed
★★★★★
★★★★★
Scott D - September 2, 2018
Verified Purchase
electric range components
Parts received, good condition, returned parts cost credited to my card.
★★★★★
★★★★★
Michael P - February 4, 2018
Verified Purchase
Great!!!
Quick delivery. Part fit perfect & works great.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2339825
Manufacturer Part Number: WB24T10153
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
