This switch controls the stove top surface burner.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB24T10058 replaces these:
AP2622889, 875079, WB24T10031
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jackie
February 13, 2018
Large burner works but I adjust the heat. When you turn it on, it automatically goes to the high heat can't turn it down. What part do I need?
For model number JBP78WY2WW
Hi Jackie, Thank you for the question.If the element its self still works but only works on high, the switch that controls the burner will need to be replaced. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Debra
January 7, 2019
Front dual burner, inside burner does not burn is this a switch or element problem
For model number JB700SN3SS
Hello Debra, thank you for your question. The most likely issue is the switch. Test the switch before replacing to determine if the part has failed. Here is a link that will provide information on testing the switch. https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm.
I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Wilma
February 27, 2019
Have 6” burner with warm food function will not turn off. Will this part fix it.
For model number JAP67BOH1WH
Hi Wilma,
Thank you for your question. Yes, if the burner is not turning off, then this part will fix the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Crystal
July 12, 2021
Front dual burner stays on high and the temperature will not lower. What part do I need to fix this?
For model number JBP67BD1WH
Hello Crystal, Thank you for the question. This is normally an indication the Switch that controls the element is defective and will need to be replaced. We hope this helps!
Front dual burner will not shut off what switch or part will correct this ?
For model number jbp67wk2ww
Hello Gail, Thank you for your inquiry. We would recommend testing the control switch, part# WB24T10058 and the element itself part# WB30T10044. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
August 26, 2021
Small burner has a dead spot on the control at position 4. Will this item correct this problem? Thank you.
For model number JBP80W0F1WW
Hello James, Thank you for your inquiry. It could either be the switch or the element itself. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
12 inch dual burner doesn’t remain on. It shuts off after a bit but doesn’t cycle back on. Not sure it’s the burner or the switch. What do you think ?
For model number JCB710SM1SS
Hello Dino, Thank you for your inquiry. You can test the parts with a multimeter to see which one is the issue. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
How can I tell if the dual element switch or dual element is bad. The outside larger ring gets hot but the inner does not.
For model number Jbp66wk3ww
Hello Aaron, Thank you for your inquiry. You can test the parts with a multimeter. Put the multimeter on the Rx1 setting, and touch the probes to the terminals. The first part you will want to check is your radiant element. The exact reading you should receive varies between models, refer to your owner’s manual to determine what yours should be, but if any element has a reading outside of 19 to 115 ohms, it is defective. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your General Electric Range Dual Element Infinite Switch
Replacing your General Electric Range Dual Element Infinite Switch
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Glass- top range had two burners that would not regulate. Burners went to HIGH when dial was set on any setting, even low.
Replaced switches. Dual power switch had been updated and didn’t match original part but there were accurate instructions in package to allow correct wiring easily. Good job Parts Select.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carl S - December 29, 2022
Verified Purchase
Works Great
Right part and easy to install. Used on GE glass top replacement for the dual burner unit.
★★★★★
★★★★★
George N - September 11, 2022
Verified Purchase
Right part, easy fix
New part, oven is working fine
★★★★★
★★★★★
Richard S - August 20, 2019
Verified Purchase
Works Great
The part works great. Easy to install. Pulling out the stove and cleaning the area took more time than replacing the switch. The wife was happy about the repair.
★★★★★
★★★★★
Ivan W - April 17, 2018
Verified Purchase
Ordered the DUAL BURNER CONTROL
GE Model : JB710S0K4SS your web site lists it as JB710SK4SS, is that the same model ? Then I ordered the DUAL BURNER CONTROL, but seems like I got an Infinity Switch Replacement Kit for a single burner part no WB24T10058. On my old EGO controller there was a post for S2 and S1, and the black wire was jumped from P2 to S1. On the controller that I got post S2 and S1 are missing. Instructions that came with the part, WB00X7094 do not mention S1 and S2 either, so how is this a DUAL BURNER CONTROL I don't know and it doesn't work the small plate alone, just the larger plate and small plate together. Do I have the correct part for a DUAL BURNER ?
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236780
Manufacturer Part Number: WB24T10058
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
