GE/GE_Thumb/00125748i01.gif
See part 18 in the diagram

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

FACEPLATE GRAPHICS (BK)

★★★★★
★★★★★
2 Reviews

Rated by 2 customers 

Really Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2321447
Manufacturer Part Number WB27T11005
Manufactured by GE
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric.
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 2 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Oven would not heat, buttons not working, beeping
    Turned power off, removed back cover, removed four screws for control board and replaced. The control board shorted out due to accidentally lifting the bottom heating coil while energized. This caused it to short out on the terminals in the back (did not trip breaker for some reason). Removing those connectors to clean them up a little is the only reason I needed the pliers. All the wires are color coded to put them back where they came from on new board. Because of other stories on this web site, I knew to order the $12 faceplate graphics so I didn't have to try to peel off the old one. Unfortunately, the graphic was damaged in shipping. However, I am getting a replacement free of charge, but I have to take it all apart again to stick it on. 1/4" nut driver is really all a person needs to do this job. Pliers could help pull wires off terminals if they are really tight, and the back panel might be secured with one phillips head screw also. Mine wasn't, but it looked like it should have been so it is now. I also put a little electrical tape on the inside of the rear panel behind those connectors for the bottom heating coil, so if it is ever lifted up again, it won't short out and fry the control board again.
    Other Parts Used:
    Electronic Control Board
    • Richard from Littleton, CO
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers
    11 of 16 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Damaged and worn controls faceplate
    1. Unplugged power cord.
    2. Remove (5) screws securing the top rear access panel.
    3. Remove (4) screws securing the clear plastic control board.
    4. Peel off the old faceplate.
    5. Install new faceplate being careful to align properly.
    6. Re-install control board.
    7. Re-install rear access panel.
    8. Connect power cord and test all controls.
    • Steven from FRANKLINTON, NC
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      2 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        2
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS2321447
          Manufacturer Part Number: WB27T11005
          Brand
          Model Number
          Description
          General Electric
          EER2000M01BB
          Range - Electric
          General Electric
          EER2000M02BB
          Range - Electric
          General Electric
          EER2002M01BS
          Range - Electric
          General Electric
          EER2002M02BS
          Range - Electric
          General Electric
          EER4000N01BB
          Range
          General Electric
          JB3000R1BB
          Range
          General Electric
          JB3000R2BB
          Range
          General Electric
          JB3000R3BB
          Range
          General Electric
          JB3001R1SS
          Range
          General Electric
          JB640DIR4BB
          Range
          General Electric
          JB640DP1BB
          Range
          General Electric
          JB640DR1BB
          Range
          General Electric
          JB640DR2BB
          Range
          General Electric
          JB640DR3BB
          Range
          General Electric
          JB640DR4BB
          Range
          General Electric
          JB640MP1BS
          Range
          General Electric
          JB640MP2BS
          Range
          General Electric
          JB640MR1BS
          Range
          General Electric
          JB640MR2BS
          Range
          General Electric
          JB640MR3BS
          Range
          General Electric
          JB640MR4BS
          Range
          General Electric
          JB640SIR5SS
          Range
          General Electric
          JB640SIR6SS
          Range
          General Electric
          JB640SP1SS
          Range
          General Electric
          JB640SP2SS
          Range
          General Electric
          JB640SR1SS
          Range
          General Electric
          JB640SR2SS
          Range
          General Electric
          JB640SR3SS
          Range
          General Electric
          JB640SR4SS
          Range
          General Electric
          JB640SR5SS
          Range

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service