Configured User Interface Control Board WD21X31902C

I had the part within 4 days back in business

Part was less than $100.00 had I scrapped the dishwasher and replaced it with a new one I would have been out $1300.00. Thanks for being there for me.

The part was delivered quickly and worked great. Installation was very easy using you tube videos to show how it was done. Couldn't be happier with the part and the service. Shipping costs are ridiculous though.

The part was packaged very well, and after watching a YouTube video on how to take the door off and panel apart, it was a very easy fix. Luckily I had read reviews here prior to installing and some warned of the importance of reconfiguring the jumper. Had I not seen that, I probably would have not noticed and installed as-is. I didn’t even know what reconfiguring the jumper meant, but another YouTube video solved that! It was as easy as pulling the pieces and reseating them according to the model configuration paper that came with the board. I put everything back together, turned the breaker back on, and the dishwasher worked like new again! I’m a mother and biologist, far from an appliance repair person, and this was very doable. It took me maybe 30 minutes.

The part was pretty easy to replace with the help of a YouTube video. Be aware that the replacement has jumpers that have to be in the correct position (Instructions cover this), or it will not work. The old circuit board did not have these jumpers. Very quick shipping! Thanks,

Our GE dishwasher would turn on randomly for a few days. Then, suddenly, it wouldn’t turn on at all. Solid led on the power board indicated no communication with the UI. Checked continuity of the wires between the two and settled on the UI board as the culprit. It installed quickly (having previously removed the faulty part and left the door apart until it’s replacement arrived). Came very quickly. No complaints. Far cheaper than a new dishwasher.

Quick shipping new part as described.

Got here in a couple days. Dish washer works great. Don’t Forget to set the Jumpers BEFORE u install or u get to do it twice : )

The Control Board was delivered quickly and was properly protected in the box. After finding the proper YouTube video to view the way to change this part out, all went well. The part was slightly different than the original in regards to the small pins on the control board that had to be positioned correctly for the model of dishwasher that you own. This board works on quite a few different dishwasher models, so follow the instructions closely for your particular one. I will be using PartSelect for my future part needs.

The part came fast and in perfect condition. It was fairly easy to replace and saved me over $300!