17137025-1-M-GE-WD12X32798-DETERGENT MODULE
Part Location Diagram of WD12X32798 GE DETERGENT MODULE
See part 811 in the diagram
( Grid squares measure 1x1 inch )
17137025-1-S-GE-WD12X32798-DETERGENT MODULE 17137025-2-S-GE-WD12X32798-DETERGENT MODULE 17137025-3-S-GE-WD12X32798-DETERGENT MODULE Part Location Diagram of WD12X32798 GE DETERGENT MODULE
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

DETERGENT MODULE WD12X32798

★★★★★
★★★★★
31 Reviews

Rated by 7 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 38.14
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS17137025
Manufacturer Part Number WD12X32798
Manufactured by GE
Product Description

DETERGENT MODULE Specifications

The detergent dispenser in your dishwasher stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This detergent dispenser is not sold with a sensor. It is gray in color and is sold individually. This is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Haier.
Part# WD12X32798 replaces these:
WD12X10415, WD12X21054, WD12X22515, WD12X22576, WD12X23539, WD12X24058, WD12X28238, WD35X21736
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
31 Reviews
4.7
Filter By Rating:
  • 5 Stars
    23
  • 4 Stars
    8
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Karen S - July 31, 2022
  Verified Purchase
The part worked great and was easy to install. The instructions were very clear.
Received the replacement for the soap dispenser in the dishwasher
★★★★★
★★★★★
Charles C - July 21, 2022
  Verified Purchase
GREAT PART
I HAVE NOT GOT IT PUT IN YET.
★★★★★
★★★★★
Hines R - June 11, 2022
  Verified Purchase
Easy repair perfect fit
Instructions were clear and easy to follow. A little tricky with the door spring, but otherwise easy to do.
★★★★★
★★★★★
Donald O - May 3, 2022
  Verified Purchase
Perfect fit and easy install
Brand New.
★★★★★
★★★★★
John D - October 29, 2021
  Verified Purchase
worked asexpected
The part came quick, now the dishwasher is back to working correctly.
★★★★★
★★★★★
Matthew B - February 12, 2021
  Verified Purchase
Not super easy to install.
The part arrived in a decent amount of time and was in working order. It was exactly the right part. It fit and worked perfectly!
★★★★★
★★★★★
Mike C - January 3, 2021
  Verified Purchase
Easy Repair, part worked great!!
The part fit perfect, and installation was easy. Also the part was delivered before I expected it to.
★★★★★
★★★★★
Felipe M - November 14, 2020
  Verified Purchase
Piece of PIE.
Ordered the part, received it like 36 hrs later and only 25 mins to install. Working like a charm.
★★★★★
★★★★★
Kathy C - September 16, 2020
  Verified Purchase
Easy Repair
Part came fast. Son in law had it changed in less than 20 minutes!
★★★★★
★★★★★
Michael K - August 7, 2020
  Verified Purchase
Worked great
The part was just I needed. The on line instructions made the no easy
  • 1
  • 2
  • 3
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Detergent module latch won’t close, latch broken
-Disabled power.
-1/4” nut driver to take off kickplate.
-Unplug wires harness to door
-Dismount dishwasher from cabinets and pull out 4-6 inches
-uncouple spring pulley from door hinges.
-Open dishwasher door about 4 inches and pull out and up to remove
-Lay door down and remove 4 -T20 star bolts and two 1/4” bolts from door hinges(the door hinge has four bolts, but only remove one from each hinge that connects to the inner plastic door)
-remove vent cap and push up on interior plastic door casing to separate outer and inner door.
-Unbolt the soap dispenser module via 1/4” bolts and replace with new module. (be sure to line up module and gasket properly, installing 1/4inch bolts crossways, slowly tightening each bolt for a perfect seal).
-Reassemble the inner/outer doors and reattach to dishwasher in reverse order.
Be sure to plug the doors electric harness and kickplate.
-Plug the dishwasher back in and run it through a test.

I recently replaced the user interface, which took about 30 minutes. A week later replaced the soap dispenser module, which took 20 minutes. Disassembling the door was easier the second round.

I would read this project very easy for somebody with technical skills and easy with no prior skills
Read less
  • Jason from TULARE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The soap dispenser was broken os to save money I ordered one on-line
The repair instructions were great and the repair went well. The repair took less than an hour.

Thank you
Gary
  • GARY from SOAP LAKE, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap did not dispense correctly
Followed video instructions step by step.
I was fortunate i had enough slack in water, electric and discharge lines to avoid disconnecting.

Two wrinkles
1. wire clips on my door had to be pulled/pried loose from door and there were two not one

2. could not slide dishwasher out after lowering adjusters and figured out it was the mounting tabs bumpimng the granite countertop, thus the use of putty knives to slide the dishwasher out.
Read less
  • LaRay from PRESCOTT, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The soap dispenser was not opening during the washing cycle
Took off the door and separated the two door pieces. Unscrewed the old dispenser and replaced it with the new one.
  • Stephanie from Huntsville, AL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Soap dispenser would not function, wouldn't open.
Took cover of door off. Removeddoor from frame 1st. Lift door off of hinge. Disconnect door from springs. Unscrew bottom screws at base of door. Lift front cover(actually slides down) remove old part replace with new.make sure unplug door from main body.
  • William from TIONESTA, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dispenser no longer opened during wash cycle
Very straight forward. After removing the power source the dishwasher was pulled forward enough to access the the door hinge springs. Then the door could be removed and the inner skin separated to access the the dispenser mounting screws.
  • Maurice from SAN JOSE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The detergent tray wouldn't open during wash cycle
1. Pull out dishwasher (not all the way) 2. Open the door. 3. Remove the white rope holding the door hinge (both sides) 4. Remove the door by pulling up when the door is open about 4-8 inches. 5. Lay the door on the floor ( put something under the door so not to scratch the front. 6. Remove the small bolt at the bottom of the door (both sides). 7. Slide the hinge back, up, then out. 8. Where the hinges were are another set of bolts, remove those (both sides) 9. Grab the top part of the door (the part with the buttons) and slide apart. 10. Remove the styrofoam carefully. 11. Disconnect the wiring harness. 12. Remove the 6 screws holding the Despenser tray in place. 13. Put in new Despenser tray and put everything back together.
Read less
  • Dennis from LAS VEGAS, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
26 of 46 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS17137025
Manufacturer Part Number: WD12X32798
Brand
Model Number
Description
General Electric
ADT521PGF4BS
Dishwasher - DISHWASHER
General Electric
ADT521PGF4WS
Dishwasher - DISHWASHER
General Electric
ADT521PGF6BS
Dishwasher - DISHWASHER
General Electric
ADT521PGF6WS
Dishwasher - DISHWASHER
General Electric
ADT521PGJBS
Dishwasher - Ge Artistry Neg
General Electric
ADT521PGJWS
Dishwasher - Lavavajilla Ge Artistry Bla
General Electric
CDT800P2N0S1
Dishwasher
General Electric
CDT800P2N2S1
Dishwasher - Dishwasher
General Electric
CDT800P2N3S1
Dishwasher - Dishwasher
General Electric
CDT800P2N4S1
Dishwasher - Dishwasher
General Electric
CDT800P2N5S1
Dishwasher - Dishwasher
General Electric
CDT805M5N0S5
Dishwasher
General Electric
CDT805M5N2S5
Dishwasher - Dishwasher
General Electric
CDT805M5N3S5
Dishwasher - Dishwasher
General Electric
CDT805M5N4S5
Dishwasher - Dishwasher
General Electric
CDT805P2N0S1
Dishwasher
General Electric
CDT805P2N1S1
Dishwasher
General Electric
CDT805P2N2S1
Dishwasher - Dishwasher
General Electric
CDT805P2N3S1
Dishwasher - Dishwasher
General Electric
CDT805P2N4S1
Dishwasher - Dishwasher
General Electric
CDT805P2N5S1
Dishwasher - Dishwasher
General Electric
CDT845M5N0S5
Dishwasher
General Electric
CDT845M5N3S5
Dishwasher - Dishwasher
General Electric
CDT845M5N4S5
Dishwasher - Dishwasher
General Electric
CDT845M5N5S5
Dishwasher - Dishwasher
General Electric
CDT845P2N0S1
Dishwasher
General Electric
CDT845P2N1S1
Dishwasher - Dishwasher
General Electric
CDT845P2N2S1
Dishwasher - Dishwasher
General Electric
CDT845P2N3S1
Dishwasher - Dishwasher
General Electric
CDT845P2N4S1
Dishwasher - Dishwasher
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
DETERGENT MODULE
$ 38.14
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.