GE/GE_Thumb/00125825i05.gif
See part 37 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Stirrer Fan Cover

★★★★★
★★★★★
20 Reviews
$18.95   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1480811
Manufacturer Part Number WB06X10712
Manufactured by GE
Product Description

Stirrer Fan Cover Specifications

The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Microwave, Range.
This part works with the following products:
General Electric.
Part# WB06X10712 replaces these:
AP4340405
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Mario
    July 22, 2017
    Can we used the microwave withough this part
    Hi Mario, thank you for your question. You should not run your microwave without the Stirrer Fan Cover. This part helps to protect from sparking inside of your appliance. I hope this helps!

    9 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Hasmik
    October 11, 2017
    I see sparks from the ceiling inside the microwave from a round plastic disc and i smell burn, can i replace this disc and is this the part? Thank you
    For model number JVM1540SM5SS
    Hi Hasmik, Thank you for your question. Yes, you are able to replace that part. This would be the part that you are looking for. Good luck with your repair.

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Eric
    January 4, 2020
    My stirrer fan cover had a quarter-sized burn/bubble in it. I ordered a new one. When I took out the old fan and cover, I noticed a quarter-sized black mark/burn on the inside-top of the microwave, above where the silver fan is placed. Is this microwave still save to use with a new stirrer fan cover? There is no hole in the microwave, just a black mark.
    For model number je1860wh002
    Hi Eric, usually these black marks are just cosmetic, as long as there is not actual physical damage it should be fine. If you are very concerned you can try contacting a technician to come take a look directly and inspect the microwave. Thank you for your question and good luck with your repair!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    David
    April 18, 2019
    We burned something in microwave while cooking. Can't get rid of smell. Can still smell burned smell coming out of it. How can i remedy this.
    For model number Jvm1540lm4cs
    Hello David, Thank you for the question. You can try to fill a bowl with 1/2 cup water and 1 tablespoon white vinegar. Microwave it for 4-5 minutes and leave it with the door shut for 10-15 minutes. Steam will loosen smell-causing detritus stuck to the walls. After the waiting period, remove the bowl and wipe the inside of the microwave down with a paper towel.Hope this helps, good luck with this repair!

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 5.0 / 5.0, 9 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        cover stirrer fan was burned and sparking in three part even the plastic rivet
        just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : )
        • Steven from UTICA, NY
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712, WB01X10055
        11 of 12 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Stirrer Fan Cover had burn holes
        1. Removed the plastic rivet holding the stirrer fan cover in place.
        2. Slipped a small pry bar under the cover to allow room to grip the cover and pull it out of its setting.
        3. Removed the stirrer fan and placed in new cover.
        4. Disposed of old rivet and cover.
        5. Aligned new cover with rivet hole and pushed it up and into place.
        6. The rivet comes in two (2) pieces: the actual rivet and a locking collar.
        7. Pushed the rivet locking collar in place and pushed rivet into the collar.
        • Thomas from SUMMERVILLE, SC
        • Difficulty Level:
          Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WB06X10712, WB01X10055
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Burn hole in cover
        My Son -in- law did it, removed the pivot pin removed the Cover and fan blade by turning it counter clockwise , Then replaced fan blade and cover and turning it clockwise and replaced the pivot pin .
        • Stella from BRADENTON, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Melted hole in plate
        Remove pin and shift old cover plate clockwise to release cover. Remove and insert fan into new cover and replace cover by inserting cover plate tabs and turning counter clockwise. Insert new pin to connect new cover plate.
        • Juli from Melbourne, FL
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WB06X10712
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Stirrer fan cover had hole melted in it.
        Gently remove plastic rivet holding cover in place.Rotate cover slightly and pull down. Remove stirrer fan from old cover and place on new cover. Place cover back in microwave and rotate till rivet hole lines up and replace rivet. Done.
        • Michael from NAVARRE, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Fan cover was melted with holes.
        Simple fix. Prayed old off with flathead screwdriver. Installed new in less than 2 minutes.
        • Jessie from PLAQUEMINE, LA
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Plastic cover had quarter size hole burned
        Use a butter knife to pop small plastic pin out and turn to remove. Used the metal pinwheel from old one and placed it back up in the microwave. Never heard of this being possible, but it seems to happen per the website and many other comments.
        • Judy from CAPE CORAL, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Parts Used:
          WB06X10712
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Stirrer fan cover was melted
        This repai me couldn’t have been simpler! I noticed that the stirrer fan cover on our microwave had melted areas. My husband suggested we just buy a new microwave. As the handywoman of the family, I searched online to see if it was a fix that I could handle. I ordered a part for less than $20 and fixed it in about 30 seconds! All I had to do was pop out the plastic screw, put the fan in the new cover, and pop it back into place!
        • Sarah from LAFAYETTE, IN
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Original part had melted because I forgot to put a container of water in microwave.
        Son was able to remove the melted part and install the new one with no problem.
        • Anita from AUSTIN, TX
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        • Parts Used:
          WB06X10712
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          20 Reviews
          4.8
          Filter By Rating:
          • 5 Stars
            18
          • 4 Stars
            1
          • 3 Stars
            0
          • 2 Stars
            1
          • 1 Star
            0
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS1480811
          Manufacturer Part Number: WB06X10712
          Brand
          Model Number
          Description
          General Electric
          HVM1540DM2BB
          Microwave
          General Electric
          HVM1540DM2WW
          Microwave
          General Electric
          HVM1540LM2CS
          Microwave
          General Electric
          HVM1540SM1SS
          Microwave - Counter Top
          General Electric
          HVM1540SM2SS
          Microwave
          General Electric
          JNM1541DM2BB
          Microwave
          General Electric
          JNM1541DM2CC
          Microwave
          General Electric
          JNM1541DM2WW
          Microwave
          General Electric
          JNM1541DM3BB
          Microwave
          General Electric
          JNM1541DM3CC
          Microwave
          General Electric
          JNM1541DM3WW
          Microwave
          General Electric
          JNM1541DM4BB
          Microwave
          General Electric
          JNM1541DM4CC
          Microwave
          General Electric
          JNM1541DM4WW
          Microwave
          General Electric
          JNM1541DM5BB
          Microwave
          General Electric
          JNM1541DM5CC
          Microwave
          General Electric
          JNM1541DM5WW
          Microwave
          General Electric
          JNM1541DM6BB
          Microwave
          General Electric
          JNM1541DM6CC
          Microwave
          General Electric
          JNM1541DM6WW
          Microwave
          General Electric
          JNM1541SM2SS
          Microwave
          General Electric
          JNM1541SM3SS
          Microwave
          General Electric
          JNM1541SM4SS
          Microwave
          General Electric
          JNM1541SM5SS
          Microwave
          General Electric
          JNM1541SM6SS
          Microwave
          General Electric
          JNM3151DF1BB
          Microwave
          General Electric
          JNM3151DF1WW
          Microwave
          General Electric
          JNM3151RF1SS
          Microwave
          General Electric
          JNM3163DJ1BB
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          JNM3163DJ1WW
          Microwave - MICROWAVE/HOOD COMBO

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service