Part Location Diagram of W11025157 Whirlpool Pump and Motor Assembly
See part 5 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Pump and Motor Assembly W11025157

Rated by 3 customers 

A Bit Difficult 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 227.81
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11770231
Manufacturer Part Number W11025157
Manufactured by Whirlpool
Product Description

Pump and Motor Assembly Specifications

This pump and motor assembly is for dishwashers. Pump and motor assembly pumps water through the spray arms during the dishwashing cycle. Shut off the house circuit breaker for the dishwasher before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore.
Part# W11025157 replaces these:
W10837401, W11184516
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.6 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Water wouldn’t circulate
-Unplugged the dishwasher.
-Removed dish racks, filters and spray arms.
-removed drain pump and drain lines.
-unplugged turbidity sensor and power connectors.
-unlocked the 3 locking connectors, removed the pump and motor assembly.
- cleaned every component with soap and water.
- applied rinse aid to the motor and pump assembly gasket.
-placed pump and motor assembly into the correct position and had a helper hold the assembly down while I locked in the connectors.
-work backwards.
  • Jacob from SAINT AMANT, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher filled and emptied water, but would not spray water around during cycle.
Husband is wonderful, tipped dishwasher over on back, disconnected hoses, and drain motor (replaced that a couple years ago), popped out old part, popped in new part. Had me help him keep door open when working from the inside, and flip a plastic holder piece into place on outside. 15 minutes later, I had a dishwasher that worked like new again.
  • Savannah from DASSEL, MN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dishwasher would not spray water. It would pump water out and fill just not spray.
I followed the instructions on the Whirlpool site for my model and part (pump and motor assembly). It was a bit hard to get the original assembly out of the dishwasher. They make it look easy but if you look at the dishwasher they are using you will realize that it is brand new. So everything comes apart and goes together smoothly for them. That is not how it happens in reality. I am a woman of average size and had never done any kind of repairs to a dishwasher before. So, it was not easy. I was however able to get it apart and put back together. And now it works!!
  • Lana from PERRY, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable)
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 26, 2019
Dishwasher is filling however no spraying out of the sprayers and it will draining after some time goes on its cleaning cycle.
For model number WDF520PADM7
PartSelect logo
Hi Brian, thank you for your question. There are a few parts that you should check when you are having this issue. The first parts to check would be your filters and tubing and spray arms. You will want to check that there is absolutely no debris blocking the paths for the water to run smoothly. You may also want to take a look at your water inlet valve as well and make sure enough water is going into the appliance. If those parts are all fine, then the problem might actually be in your Pump and Motor. I hope that helps. Good luck with your repair.

10 people found this helpful.

Was this helpful?
Thank you for voting!
Luis
June 7, 2023
Could you Please clarify what parts are included on the motor and pump assembly part.
For model number WDF520PADM9
PartSelect logo
Hello Luis, thank you for the question. The pump and motor assembly includes the following parts: 1. Cover, part number PS11755007. 2. Sump, part number PS11755471. 3. Grommet, part number PS11756098. 4. Circulation pump, part number PS16744934. 5. Hose, part number PS3651318. We hope this information helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Matt
November 23, 2021
Does the pump #W11025157 have a heater built in, my water is not getting hot?
For model number WDF520PADM7
PartSelect logo
Hello Matt, Thank you for the question. The Pump does not come with a built in Heater. There is a heater element at the bottom of the tub, PartSelect Number PS8260087. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Lauri
December 27, 2023
Dishwasher fills, sounds like pump is making a noise but nothing then it goes and drains. Is it circulator pump or pump and motor?
For model number WDF330PAHW4
PartSelect logo
Hello Lauri, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the circulation pump, part number PS16744934, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11770231
Manufacturer Part Number: W11025157
Brand
Model Number
Description
Kenmore
66513002N511
Dishwasher - DISHWASHER
Kenmore
66513003N511
Dishwasher - DISHWASHER
Kenmore
66513004N511
Dishwasher - DISHWASHER
Kenmore
66513009N511
Dishwasher - DISHWASHER
Kenmore
66513802N710
Dishwasher - DISHWASHER
Kenmore
66513803N710
Dishwasher - DISHWASHER
Kenmore
66513804N710
Dishwasher - DISHWASHER
Kenmore
66513809N710
Dishwasher - DISHWASHER
Kenmore
66514312N413
Dishwasher - DISHWASHER
Kenmore
66514313N413
Dishwasher - DISHWASHER
Kenmore
66514319N413
Dishwasher - DISHWASHER
Kenmore
66514422N511
Dishwasher - DISHWASHER
Kenmore
66514423N511
Dishwasher - Dishwasher
Kenmore
66514429N511
Dishwasher - DISHWASHER
Kenmore
66514502N020
Dishwasher - Dishwasher
Kenmore
66514503N020
Dishwasher - Dishwasher
Kenmore
66514509N020
Dishwasher - Dishwasher
Kenmore
66515112K218
Dishwasher - DISHWASHER
Kenmore
66515113K218
Dishwasher - DISHWASHER
Kenmore
66515114K218
Dishwasher - DISHWASHER
Kenmore
66515119K218
Dishwasher - DISHWASHER
Kenmore
66517152K217
Dishwasher - DISHWASHER
Kenmore
66517159K217
Dishwasher - DISHWASHER
Kenmore
66517382N710
Dishwasher - DISHWASHER
Kenmore
66517383N710
Dishwasher - DISHWASHER
Kenmore
66517389N710
Dishwasher - DISHWASHER
Kenmore
66517482N710
Dishwasher - DISHWASHER
Kenmore
66517489N710
Dishwasher - DISHWASHER
Whirlpool
IDF320PAFW1
Dishwasher - DISHWASHER
Whirlpool
IDF330PAGW0
Dishwasher - DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service