This is an ice maker assembly for refrigerators. This assembly is responsible for freezing and breaking water that comes from the water line within your refrigerator. If your ice maker is not producing ice cubes anymore, and this assembly is turned on, you should test it with a multimeter before replacing it. This ice maker assembly features a primarily plastic construction, with a metal shut-off arm and two wire harnesses that supply it power. This ice maker assembly is an OEM part, and must be installed with the new wire harness in order for it to work.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nadia T - September 2, 2023
Verified Purchase
Work very great
It’s is very great part and working very great,thanks for your service
★★★★★
★★★★★
Kenneth W - August 15, 2023
Verified Purchase
Faulty part
I replaced the wiring harness as directed. No problems there. New ice maker makes noises but does not produce ice. I thought it might be the water valve on the back of the refrigerator so I ordered one. Still no ice.
★★★★★
★★★★★
John O - December 16, 2022
Verified Purchase
My ice maker replacement
I wasn't prepared for the complete overhaul that had to take place. Seems the new version required a complete rewire. The new assembly was an easy replacement, just looked complicated.I now have all the ice I can use...
Thank you for the fast shipment and great product...
★★★★★
★★★★★
Ken K - August 14, 2022
Verified Purchase
Made ice
You need to be a bit mechanical to get the job done; but it was less than a two hour job; start to finish without working too hard. No major issues. It fit and it works. The original old one had a failed (stuck) motor. The harness had to be changed to fix my refrigerator.
★★★★★
★★★★★
George F - August 7, 2022
Verified Purchase
Challenging but successful
Use the chat aspect of the Part Select listing service, the parts and/or model numbers of your original part have probably been updated and they can provide you with the new series numbers. YouTube played a major part in accomplishing this repair. I watched the video several times before plunging into the job. Take lots of pictures with your phone during disassembly so you can refer to them as a guide during reassembly. Be patient, don't force anything-the plastic could break. Last step, be patient waiting to see if it makes ice. We discarded the first 3 or 4 bins just to make sure the new cubes were clean ice. Good-luck !
★★★★★
★★★★★
Michael M - July 17, 2022
Verified Purchase
Replacing the wire harness was a little tricky,but still got it done
The part was received in good condition snd thr appliance is up and running.
★★★★★
★★★★★
Samuel Febres, S - July 15, 2022
Verified Purchase
A good purchase
The part was correct and the information on the App worked very well.
★★★★★
★★★★★
Judith S - June 14, 2022
Verified Purchase
Works!
The part was in great condition. It works now.
★★★★★
★★★★★
Clayton H - May 28, 2022
Verified Purchase
Flawless
Everything from ordering to installation went great. And this is the second time ordering parts from you. Both times were perfect thanks
★★★★★
★★★★★
Charles M - May 18, 2022
Verified Purchase
I’ve maker fix
Part was as described and more. Came with extras like the 2 wiring harnesses to fit similar model. Fast shipping and packed sturdy.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 17 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice would stick and not dispense
Removed the ice tray with nut driver underneath after removing and unplugging ice machine. Then by remembering, unplugged the necessary electric connectors because electric worked well(replaced electric last time I got a new assembly). Plugged in electric needed, not all (again I'm saying that), then fit back assembly with nut driver
... Read moreunderneath.
Read less
Gregory P from EXPORT, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker wouldn't work
The repair went well. Before I ordered this ice tray assemble, I replaced the water inlet valve thinking that was the problem. The new ice tray came with 2 new wiring harnesses. It wasn't hard to see which one was needed for the new system. Changing the tray out was not hard at all nor was the new electrical harness. The only problem was
... Read morethe inlet valve sent too much water into the ice tray. After seeing the ice tray leaking, I removed it again to see why. The only thing I could come up with was too much water was being put into the ice tray. I had the old inlet valve and reinstalled it and the ice maker has worked flawlessly ever since. There was nothing wrong with the old inlet valve only the ice tray assembly. So all good and doing a great job once again.
Read less
Jeannette from MESA, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice .
Turn ice maker off Remove ice tray Remove side panel cover Unplug ice machine Slide ice machine out remove bottom section Install new ice machine
Very good instruction videos on you tube.
William from PKS, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray sticking. No ejection of ice. Motor not working properly
Took out ice maker. Then unscrewed tray after opening old turn motor clock panel and carefully detaching wires from socket(s) where needed. Put in and screwed in new tray with the new motor clock. Replaced wires into new sockets. Put the whole maker back into place. Makes great ice.
Judith from EXPORT, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not making ice
watched diagnosis and repair videos online, assessed problem, order part and replaced ice maker. was not expecting to replace wiring harness but got it done and icemaker is working just fine.
Thomas from SURPRISE, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unplug and remove existing wiring harness and old ice maker if need to.
Got lucky ordered new ice maker then current one started working again ???????
Brent from SCOTTVILLE, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It took a little time to run the new wire harness.
Looked up a video on utube. That was a big help. The new ice maker didn't come with a insulation guide.
Larry from DENHAM SPGS, LA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water coming from ice dispenser
First found U Tube video of my exact refrigerator, ice maker remove and replace. Many available, all are helpful. Watch several times. Once part arrived the repair went very smoothly. Only had some difficulty attaching the ground wire, had to loosen the auger motor to attach the tiny screw. Not difficult, just took a bit of time to get t
... Read morehe angle on the screw correct.
Read less
Timothy from AVONDALE, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker quit
Watched you tube video,.....followed,....went very well.....picked the right wiring harness,.....no problems.......making ice in 1 hour
Kenneth E from AUGUSTA, KS
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The icemaker had had failed.
They send you just the guts, the inner core of the icemaker, and don't include the back piece that has the motor to rotate the screw-drive dispenser and the blower. You get 2 wiring harnesses, and since no instructions come with, you get to figure out which one. The replacement has a few different plugs than the original and those compete
... Read morent can determine which without too much problem. One obstacle was the grounding screw which was inaccessible without removing another part which would have added greatly to the difficulty. I snipped off the old wire and the ring-terminal on the new one and joined the two with a wire clasp. Works like a charm. I had previously replaced the cycling thermostat and checked that the water valve solenoid was within the proper ohm boundaries-don't spend the money for the whole thing without trying those first! Mine must be an odd model because no YouTube videos showed the icemaker from this model.
Read less
Roger from FORT PIERCE, FL
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
43 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deedee
March 7, 2018
I have the numbers off of my ice maker its self and the numbers are not matching with the numbers on the new ice maker you are supplying. Well it still work? The numbers on my ice maker are w10314825 or w10509495
For model number GIGFARXXYO8
Hello DeeDee, Thank you for the question. The numbers w10314825 and w10509495 are not part numbers. They could be mold or factory numbers but they are not valid part numbers. Checking the model number provided, the manufacture lists PartSelect Number PS11769140. Hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Faye
August 7, 2019
Ice maker stopped making ice. Water line for water (and thus filter) i think is working fine. We know at one point the fridge was too cold and wondered if something froze but we let thing thaw and still not working. We have tried to take the existing ice maker out thinking we could just replace it but pressing on the clip to remove wiring harness as shown in various youtubes doesn't seem to work either.
For model number MF12269vem7
Hi Faye, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
15 people found this helpful.
Was this helpful?
Thank you for voting!
Hilda Gonzalez
January 18, 2019
Is this piece will work for my fridge
For model number WRX735SDBMOO
Hello Hilda, thank you for your question. Yes, this ice maker part number PS11769140 will work with your appliance. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tommy
March 2, 2018
I was going to order the ice maker for this model. Does this include motor also
For model number Wrx735sdbm00
Hello Tommy, Thank you for your inquiry. Yes, the motor is included with this icemaker assembly. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Martin
April 16, 2019
My ice maker makes ice but twice in the last week it has continued to fill the ice maker with water and does not stop. Flooding the refrigerator. Do I need to replace the ice maker?
For model number KFXS25RYBL4
Hello Martin, Thank you for the question. This sounds like an issue with the Water Inlet Valve, PartSelect Number: PS11755669. This part releases water from the supply line for the ice maker and if defective it can become stuck open longer then normal over filling the ice maker. Hope this helps!
I have tested the water inlet valves for continuity both the one in back and the double one behind the panel inside the fridge below the water filter and they all pass. I have jumpered the v and l holes to see if water enters the ice maker and it does, however, not on its own (only works when jumpered). Does this sound like replacing the ice maker will resolve the issue of no ice being produced?
For model number WRX735SDBM00
Hi Matt,
Thank you for your question. If the ice maker is not making ice, then it could be the issue. You should also check the cycling thermostat to see if that is causing the issue. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 28, 2019
My KitchenAid ice maker is w10377151. Will this connect to the current wiring harness?
For model number KFXS25RYMS2
Hello Michael, thank you for your question. Yes, this is the compatible replacement icemaker that will work with your unit and work with the wire harness. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cuong
May 2, 2019
Can i order just the motor for the ice maker. What is the part no. Of this item, and if it's available, how much does it cost ? Thanks
For model number maytag MF12269VEM7
Hello Cuong, thank you for your question. Unfortunately, the icemaker motor is not available separately. You would have to replace the whole icemaker PartSelect Number: PS11769140. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jeff
January 18, 2019
Hi, my fridge is Amana. When the ice maker comes on the water does not shut off and runs out of ice hole on door. Do i need the whole ice maker
For model number Afi2539erm00
Hi Jeff,
Thank you for your question. If the water is not shutting off when the ice maker is on, you will need to check the ice maker, water inlet valve and the electronic control board to see which part is causing the issue. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Adam
August 26, 2021
I need to replace my icemaker and the part number I have is w10377151. I'm just wondering if I purchase the icemaker with w10882923 will I need to change out the wiring harness as well?
For model number wrx735SDBM00
Hello Adam, Thank you for the question. The Ice Maker W10882923 includes 2 Wire Harnesses and you can use what is compatible with your appliance. We hope this helps!
