Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
CATHY - June 6, 2020
Verified Purchase
Easy peasy
my husband put it on easily
★★★★★
★★★★★
Sheryl T - June 20, 2019
Verified Purchase
Kick plate replacement
While the plate fit the make and model of the dishwasher the screws did not line up properly with the holes. So, I was not able to use the screws but was able to clamp the plate on with the screw brackets. It worked even though not ideal.
★★★★★
★★★★★
Virginia D - June 18, 2018
Verified Purchase
Dishwasher kickplate perfect
I bought a high end dishwasher that was the floor model. The price was great, but the kickplate was missing. The part arrived in a timely fashion and my kitchen is now looking finished! This was an easy fix.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The plate was missing at the time we purchased the house.
It was ok but screw holes were not in the right spot but we put one in and that is sufficient for now. It prevent thing from follow under it.
Removed the old panels with a phillips screwdriver. Removed the control panel and put the door latch and the control board into the new control panel the same way they were in the old one. Also have instructions to follow if needed. Replaced the front panel and put the screws back in. The toe and access panels went in easy, the only th
... Read moreing we had to do was touch up those screw with black paint as there were not new black screws in the kit. It was an easy and simple process.
Pulled toe panel and then electrical panels and handle and then front panel. It was a white appliance and i changed it to black. The people at part select was very helpful and friendly. I would do business with them in the future.
First , I went outside and turned the breaker for the dishwasher off. Next,I removed the screws that held the bottom 2 pieces, that rest on the floo,r in place. Then removed the two beige metal pcs. . Next I replaced them with the 2 black pieces I had ordered and secured them with the 2 black screws I had received as part of my order. Th
... Read moreen I removed the scews from the inside of the door of my KitchenAid Dishwasher. This released both the front bottom panel and the control panel. . I took the beige bottom door panel off and moved the insulation piece from the back of thebeige panel to the back of the black panel. Then I intalled the new black panel I ordered and resecured it with two screws until I had finished with the control panel switch out. I had to unplug an electronic tape from the inside of the beige control panel and plug the same tape back into the black control panel. I also had to remove the beige handle that was on the inside of the control panel, attached to the door, and replace it with the new black one I'd received. I then installed the black control panel and reattached it with screws and finished replacing the rest of the screws I had removed from the inside of the door. I tested the handle to make sure it opened the door and locked it like it should and then went outside and turned the breaker back on. Came in and turned on the dishwasher and did a load of dishes. It looks awesome, matches the rest of my black appliances and I am very proud to have done it myself. I also wanted to thank the customer service lady who was so great to work with on the phone. I would shop with you again.
Removed the toe panel and replaced. Removed the front panel and replaced. Removed the control panel, disconnected the ribbon wiring and replaced with the new control panel. Reconnected the ribbon wiring and secured the panel with the six screws..
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jane
August 11, 2022
My contractor threw out the insulation and kick plate to my Maytag dishwasher. Can I order the insulation with the plate and if it doesn’t fit can it be returned
For model number MDB4949SDM3
Hello Jane, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348217 for the Toe Panel Insulation. Please see the link attached for the return policy. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Grille or Kickplate","title":"Grille or Kickplate","url":"/Dishwasher-Grilles-and-Kickplates.htm"},{"position":3,"name":"W10871196","title":"W10871196","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout