Lint Filter WE03X23881

Hello Dreama, thank you for writing. This Lint Filter for your model is not located on the door, but on the front panel of the dryer that the door closes into. I hope this answers your question.

Hello Nazleen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11763056. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Michele, Thank you for your question. Yes, this would be the correct lint filter for your dryer. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hello Blakelyn, Thank you for your inquiry. We have researched the model number that you have provided and show the compatible lint filter as part# PS11763056. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Elizabeth, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11763056. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Lynette, Thank you for your question. Yes, this would be the correct lint filter for your dryer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hi Judith, Thank you for your inquiry. If you have to hold down the push-to-start switch to get the dryer to work, then you will have to replace the switch as it sounds like it is not working correctly. I hope this helps. If the Switch is not the issue, the motor may need to be replaced. The motor has a switch that is activated when the start switch is pushed to kick the motor on. Thank you and have a great day!

Hello Fran, thank you for your inquiry. According to our research, if you see lint around the opening, chances are the vent system needs cleaning. You can easily clean the vent by using the following instructions: 1. The lint filter in front of the dryer, open the door, and pull the lint filter straight up. 2. Do not use water to remove the lint from the lint filter. Just pull the lint from the filter with your fingers and dispose of it. 3. Using a vacuum crevice tool, you can carefully clean inside the lint trap to further ensure proper airflow and efficient drying. 4. If your lint filter does have residue on it, you can clean it by wetting a nylon brush with hot water and liquid detergent. Scrub both sides of the lint filter. Rinse both sides thoroughly with hot water, then thoroughly dry with a clean towel. Inspect the lint filter to make sure you have removed all residue. Repeat as needed. Dry the lint filter fully. If the issue still persists, replace the lint filter, part number PS11763056, to fix the issue. We hope this information is useful!

Hi John, Thank you for your question. To remove the lint from the area under the lint filter, you will need to remove the front panel of the cabinet. There is a cleaning brush that you can use to help remove the lint. The part number listed under your model number for the cleaning brush is PS1817576. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hello Francesca, thank you for your question. The part number for the lint filter is PS11763056. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.