Maytag/Maytag_Thumb/EVYVVXDM.gif
See part 35 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

High Voltage Board

★★★★★
★★★★★
1 Review
$406.50   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11759800
Manufacturer Part Number W10890094
Manufactured by Whirlpool
Product Description

High Voltage Board Specifications

This board is located on the back of the refrigerator. It controls the operation of the unit. Note:***Please have serial number to check series.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Clicking sound | Will Not Start
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Maytag, Whirlpool, Kenmore.
Part# W10890094 replaces these:
AP6027422, 12920708, 12920710, 67006389, 67006430, 67006747, W10178102, WP12920710
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

18 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
November 24, 2017
I am searching for a control board for this refrigerator. Which is the correct one?
For model number MFI2568AES
Hi Robert, Thank you for your question. This would be the correct main control board for your appliance. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Brenda
February 10, 2018
How do you enter the program code to activate the refrigerator front panel after replacing the hv board? Will a surge protector help keep this board from faulting again or is this just a design flaw?
For model number MFI2568AEB
Hello Brenda, Thanks for your question. You will need to obtain a 4-digit code from the model/serial number tag on your fridge. Press and hold the Door Alarm Keypad. Press and hold Freezer Temperature Down. Release the Door Alarm Keypad and wait 3 seconds. The control will now show PE, which means programming mode. Entry is done by pressing the Freezer Temperature Down key once more. The control will display the current program code, which you validate using the number from your model/serial plate. Programming mode is exited by pressing Door Alarm for 3 seconds if the code is already correct. Press the Refrigerator Temperature Up key or Refrigerator Down key to change the digit values. Decimal points indicate the selected digit, press Freezer Temperature Up to select the next digit. Once your desired code is entered, press and hold the Freezer Temperature Down button until the code flashes. A surge protector can certainly help to prevent this issue from occurring. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Richard
March 1, 2018
I replaced high voltage board looked on by serial # found 1411 code but it beeps instead of taking the code what should I try know.
For model number MFI2568AES
Hi Richard,Thank you for the question. I suggest turning power off to the appliance for 5 mins and Press and hold the Door Alarm Keypad. Press and hold Freezer Temperature Down. Release the Door Alarm Keypad and wait 3 seconds. The control will now show PE, which means programming mode. Entry is done by pressing the Freezer Temperature Down key once more. The control will display the current program code, which you validate using the number from your model/serial plate. Programming mode is exited by pressing Door Alarm for 3 seconds if the code is already correct. Press the Refrigerator Temperature Up key or Refrigerator Down key to change the digit values. Decimal points indicate the selected digit, press Freezer Temperature Up to select the next digit. Once your desired code is entered, press and hold the Freezer Temperature Down button until the code flashes. A surge protector can certainly help to prevent this issue from occurring. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ronald
May 6, 2018
Current hv board is 12920717. Replacement board 12920710 would not accept my pe1411. What board should i order?
For model number MFI2568AEQ
Hello Ronald, thank you for your question. The correct HV board for your unit is Main Control Board W10890094. This is the substitution part the manufacturer recommends for your model # MFI2568AEQ. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Henry
May 6, 2018
I replaced the hv board and tried to reprogram the refrigerator but the display buttons did not work when depressed. I believe either the lv board is bad or the touchpad is defective. Your advice please?
For model number MFI2568AES
Hello Henry, Thanks for your question. This is typically due to the high voltage board rather than the low voltage board, so it is likely another part causing this problem. You may want to check the wiring connections to the high voltage board to ensure all of the wires are connected properly. If it is all connected properly, the touchpad itself may be the issue, part number PS11738665. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
December 12, 2018
I had a power outage and the control panel lights are no longer lit. They do light if i press a button. I have unplugged and replugged several times, no help.The fans and compressor do not start. inside lights are lit when door opens. pushing the freezer temp button will make a noise through the ice dispenser. any help would be greatly appreciated.
For model number Afi2538aes4
Hi David, Thank you for your question. If the refrigerator is not starting, there are some parts that you will need to check to see which one is causing the issue. You will need to check the capacitor, the start device and the electronic control board. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robert
February 24, 2020
I am searching for the correct high voltage control board part number. My model and serial number are the following. Can you please let me know. Thank you Model# - mfi2568aes Serial number - 12652096lt
For model number MFI2568AES
Hello Robert, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11759800. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Todd
October 10, 2019
I have replaced the hv board pn w10890094, and seems every thing works, but the ice will not fall out of the tray. So i went to program the fridge. My code is 1411, it will not flash and stay, when i try to program a gain i think 0320 comes up. Please help
For model number MFI2568AEB
Hi Todd, thank you for your question. Unfortunately we cannot find any information on those codes that you are quoting to us. You may want to touch base with your manufacturer so that they can get you a definition on what those codes mean and what exactly is the issue with your appliance. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Jeff
February 4, 2020
Replaced high voltage board but after entering the correct code and pressing the freezer - key for three seconds, it beeped once but does not begin blinking. I tried opening and closing the door but nothing makes it accept the code???
For model number MFI2568AES
Hello Jeff, thank you for your question. Try unplugging the unit then plugging it back in and starting the code process again. ou will need to obtain a 4-digit code from the model/serial number tag on your fridge. Press and hold the Door Alarm Keypad. Press and hold Freezer Temperature Down. Release the Door Alarm Keypad and wait 3 seconds. The control will now show PE, which means programming mode. Entry is done by pressing the Freezer Temperature Down key once more. The control will display the current program code, which you validate using the number from your model/serial plate. Programming mode is exited by pressing Door Alarm for 3 seconds if the code is already correct. Press the Refrigerator Temperature Up key or Refrigerator Down key to change the digit values. Decimal points indicate the selected digit, press Freezer Temperature Up to select the next digit. Once your desired code is entered, press and hold the Freezer Temperature Down button until the code flashes. I hope this helps.

Was this helpful?
Thank you for voting!
Renee
February 26, 2019
I am questioning the part number for the high voltage board Maytag is saying it needs to have a number after my model number and there is not one on my fridge. For the mfi2067aes ser 12221941na what is the correct part number? Are they even made still?
For model number MFI2067AES
Hello Renee, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11759800. Thank you for your inquiry, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 24 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Digital Display Flashing and Ice Maker Flap Opening/Closing
1. Unplugged refrigerator

2. Removed rear silver stainless steel panel on the right rear side of the refrigerator (if you are standing in front of the unit) using a small socket set. The panel is vertically located in center at the rear of the refrigerator.

4. Removed plastic cover over the HV controller board.

5. Unplugged 4 molex connectors attached to the board and carefully pushed on the plastic release locks that hold the board in place as not to break them and removed the HV controller board.

6. Inerted the new HV controller board and plugged in the molex connectors. All molex connectors are of unique size and will only attach to the HV controller board in one location.

7. Replaced plastic cover over HV controller board and attached stainless steel panel with a small socket set.

8. Plugged in the refrigerator.

9. Identified programming code inside the refrigerator.

10. Followed included instructions to enter program code to activate refrigerator front panel.
  • William from Agoura Hills, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    W10890094
121 of 174 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flashing lights, ice delivery door cycling
First remove the front door panel by lifting out the catch tray at bottom. Then the 2 screws it covered. Carefully pry around edges to lift the panel away from the door. Disconnect the small wire harness from the back. There are only three, you'll get it. This will stop the lights and door malfunction. Now you can wait the 10 weeks it takes to get the HV board. Your fridge will still operate, even make ice. It just won't deliver ice or water through the door.
When you recieve the HV board, unplug the fridge from the wall outlet. Remove the metal plate on the back of the fridge. This is held on by four screws. A 1/4 in nut driver is perfect. Then remove the clear plastic door covering the HV board. Pry it off with a screwdriver. Next, disconnect all of the wire harnesses by squeezing the release tabs and just pulling apart. You'll see how the board is held to the fridge. Push to one side while pulling on the other. It comes off easily. Put the new one on re-connect the harnesses, cover with both plates. Plug back into the wall.
Go to the front. Re-connect the small harness to the display board and fasten back to the fridge. Funtime.
Re programming. Follow instructions that came with the new board. It's fairly easy. What they don't tell you is that this process is done with both top doors open.
I took the old board to a friend. (Electronic wiz) He found 2 overheated capacitors. Replaced them for about $1.50. I now have a spare. I think these capacitors overheat trying to run the ice conveyor. It sometimes gets stuck. Keep it clear, you shouldn't have this problem.
Bad design. $2500 unit 3 1/2 years old needs a $200 part? And I fixed it myself. Think what 2 service calls would cost. And why aren't the boards readily available? The manufacturer MUST know there is a need.
Good luck.
  • roger from rogersville, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    W10890094
83 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front Ice Maker Display Flashing and Ice Maker Door Flapping Open and Closed
I firts pulled the refrigerator away from the wall. Un plugged it and removed a metal cover off of the back of the fridge. A clear plastic container was behind the metal pael. Removed the connectors and snapped the pld board out, Put in the new one and reinstalled the cover. Had to get the code number from theinside of the frifge and entered it into the front key pad. This step took a bit of figuring to advance the numbers using the key pad but with some trial and error...Repair done.
  • Dave from granite Bay, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
  • Parts Used:
    W10890094, EDR4RXD1
32 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker door opening and shutting
Maytag Ice2-0 French Door refrigerator

Our refrigerator started slamming the icemaker door open and shut one evening. Investigation of the card behind the icemaker control panel (the LV control card) on the left-hand door revealed that the +12 volt supply that the card receives via J1 pin 3 was running at about 7 volts. As part of this investigation, I found that a wiring diagram for the fridge is in a sticky envelope behind the kickplate/grill at the bottom front of the 'fridge.

I was confused for a while because the +12 volt supply is floating, so measurements against the 'fridge frame gave very strange results. When I figured that one out, I got consistent results by measuring against J1 pin 1.

I disconnected J6 from the HV control card, located at the back of the 'fridge, and found that the +12 volt supply recovered to about 11.9 volts, so I suspected that the problem was that it was being loaded down by something. This supply gos to three places...the icemaker fan, the LV control card, and the evaporator fan (in some units)

I eventually found how to access the connector that feeds the icemaker, and disconnected it, in order to eliminate the ice fan from the supply. This made no difference, and the resistance across the supply was now 2800 ohms with J6 disconnected. I also noted that the two smoothing capacitors (C12 & C13) on the HV control card were getting hot...probably due to a high ripple current. As a load of 2800 represents a load current of only 4.3 mA, I concluded that the fault was on the HV card.

The +12 v supply is generated by an AC/DC rectifier directly off the 115 volt supply, giving a primary voltage of nearly 300 volts DC. This is chopped by a little horror of a device called a TOP247. It generates an AC waveform and drives a little transformer to generate +12 volts. This sort of circuit can be highly unstable, and it probably went into a high frequency mode, chopping at several megahertz.

Replacing the HV control card solved the problem. I have retained the card, and I intend to reverse engineer it's schematic, then try to repair it. The card cost about $150, but the actual defective component is unlikely to cost more than a few dollars, and I have a suspicion that the two electrolytic capacitors (C12 & C13) may be the cause.
  • Paul from Phoenix, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
  • Parts Used:
    W10890094
23 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
front control pannel blinking/ice door openning &closing by self
After the repairman came and was going to charge me 500.00 to fix, I got on the net and found this site. Located the issue, part, and ordered it. The only trouble I had was locating the board in the fridge? It's right in the back behind the metal door, duh. Unplug each wire harness, pull board out and replace the board and plug harnesses back in. Took under 5 minutes from start to finish. It took longer to program it, after two tries I re-read the program instructions sent with the board and presto it works perfectly!!! A Big thanks to part select.com. ps if the fridge is cooling correctly you can take the top left cover off unplug the harness there and get a few days worth of cool out of it before it goes out completely but I would suggest the overnight ship if you are already dead, 24 bucks is a small price to pay to be up and running within 24 hours.
  • Rick from Lynnwood, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    W10890094
19 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door where the ice cubes drop out of the ice maker started flapping and all the lights on the front of the frig were blinking wildly. This happened at 3 am.
Did research on the internet, and learned that two capacitors on the main circuit board located on the back of the frig had gone bad. Tried to replace the two capacitors on the old board, but no success. So, I ordered the whole board and plugged it in. Only problem is new board is not programmed to frig. So, had to program frig. by following directions found on the internet. I saved at least $200. Thanks.
  • Jayne from Export, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
  • Parts Used:
    W10890094
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Ice and Water dispensor quit working early the morning, then later in the same day. The refrigerator door (LED) display lights started blinking on and off along with the ice cube door flap opening and closing.
I almost ordered the Door Led Board but read where somone else had the same problem and ordered the HV control board. Pulled the refrigerator out to gain access to the back of it. Safety tip make sure you unplug it. Located the HV Control board, release the wire connectors from it, and simply replace the board. Plug it in and follow the directions which come with the new HV board on programing it. Entering the Code off the units Data plate.
  • Frederick from Beaufort, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Parts Used:
    W10890094
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Woke up and the front panel that tells the temp was off.
Removed the back cover for the HV Board. Unplugged the cables from the old board, put the new board in the same exact way, connected the cables. Put the back cover back on. The hardest part was the programming. You may need to read it again in order to figure it out, but not too difficult. Face it there are only so many buttons, eventually you will go "AH-HA" ! I saved myself around $250! I will most definately use this site if I have other appliances that do not work! You guys rock!

~Lisa~
  • lisa from paulsboro, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    W10890094
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights flashing ice maker opening and closing wont cool
Unplug Refrigerator access panel in the rear unscrews- disconnect the wire harness from circuit board- remove board (snaps out). Insert new board ,attach wires close access panel. Plug refrigerator in. reprogram fridge code with ice maker controls code is on label with model number and s/n number.
  • craig from bridgton, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    W10890094
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lights flashing on door and ice cube door opening and closing constantly
The repair was quite easy. I had already removed the panel cover on the rear and removed the plastic cover several days before that. I had also pulled the wire harness that went to the upper left connector that has allowed the refrigerator to operate without the flashing lights while the part was enroute. I unplugged the refrigerator, disconnected the remaining connectors, and popped the old electronic control board out. I had to be very careful here as the plastic snaps that held it in were very hard to spread apart and I did not want to break one. Put in the new board, reconnected all of the wiring harnesses (each has a different pattern so you cannot mix them up). I plugged the refrigerator in and using the code from the label on the upper right hand side of the refrigerator and the instructions that came with the new board, I programmed the correct code in and everything was operational. Put the covers back on and went back to work. I did all of this in a 15 minute break between teleconference calls.
  • Larry from South Chesterfield, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
  • Parts Used:
    W10890094
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
    Sort by:
    Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11759800
      Manufacturer Part Number: W10890094
      Brand
      Model Number
      Description
      Kenmore
      59677532600
      Refrigerator
      Kenmore
      59677533600
      Refrigerator
      Kenmore
      59677539600
      Refrigerator
      Amana
      AFI2538AEB
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AEB00
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AEQ
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AEQ00
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AES
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AES00
      Refrigerator - Bottom Freezer
      Amana
      AFI2538AEW
      Refrigerator - Bottom Freezer
      Whirlpool
      AFI2538AEW00
      Refrigerator
      Maytag
      MFI2067AEB
      Refrigerator - Bottom Freezer
      Maytag
      MFI2067AEQ
      Refrigerator - Bottom Freezer
      Maytag
      MFI2067AES
      Refrigerator - Bottom Freezer
      Maytag
      MFI2067AEW
      Refrigerator - Bottom Freezer
      Maytag
      MFI2568AEB
      Refrigerator - Bottom Freezer
      Maytag
      MFI2568AEQ
      Refrigerator - Bottom Freezer
      Maytag
      MFI2568AES
      Refrigerator - Bottom Freezer
      Maytag
      MFI2568AEW
      Refrigerator - Bottom Freezer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service