Drain Hose WPY913158 | Official Whirlpool Part | Fast Shipping | PartSelect
Drain Hose – Part Number: WPY913158
Drain Hose – Part Number: WPY913158 Drain Hose – Part Number: WPY913158 Drain Hose – Part Number: WPY913158 https://partselectcom.azureedge.net/Schematics/Maytag/39359.gif

Drain Hose

PartSelect Number PS11757610

Manufacturer Part Number WPY913158

Manufactured by Whirlpool

Product Description

Drain Hose Specifications

This gray drain hose is eight feet long.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Leaking

This part works with the following products:

Dishwasher.

This part works with the following brands:

Maytag, Magic Chef, Jenn-Air, Admiral, Crosley, Norge.

Part # WPY913158 replaces these:

912540, 912808, 913158, 99001073, Y912808, Y913158.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
TUAN from ATLANTA, GA
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
WPY913158, 675806
Leak at hose drain and under motor shaft
1. Hose drain: I could not use the new hose drain I bought because the female end to be hooked up to the dishwasher is not bendable enough without breaking the hard plastic casing. You can bend the corrugated hose only so much. I considered adjusting the orientation of male end to accomodate the female end. It was too risky for me. In the end, I abandoned all options and resort to salvaging my old hose by patching the nail-size hole with a combination of caulk, teflon tape and electrical tape. It's holding up for a week now.
2. Impeller: Another leak was under the motor shaft. Days of investigation lead me to believe that I need a new impeller because mine was broken into pieces. Searching for a new impeller was not easy. The part number does not help. I just stumbled upon it by chance after browsing through forums after forums.

Anyway, replacing everything that comes with the impeller kit makes the matter worse. It leaks even more!

Seeing me wasting 5 days already on the dead horse, my wife grows impatient and threaten to buy a new machine or call a pro. This would either hurt my pocket or my ego.

She was out that evening so I sneaked in trying to give it what's left of me. Taking the machine apart and going through every part, I narrow down to motor shaft seal. I compare the new one with my old one and notice that the new one is like 1/8in higher. Compress each by my thumb, I feel that I could not press the new one down as much as I can with the old one.

So i removed the new one and put my old motor shaft seal back. The rest is history.

My mother-in-law was so proud of me. My wife was apparently not. She sounded like "yah right, 6 days on that dead horse...".

Other than saving several hundreds buck, I just taught my self another lesson: Don't quit. Try harder and happy ending would come. For me, it did.
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Roger from Palm Bay, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
WPY913158, WP616099, 912529
Leaking water from the discharge hose and pump gasket
1) Remove the lower dish rack.
2) Use towel to soak up any water in the dishwasher.
3) Remove the bottom plate on the dishwasher front.
4) Remove clamp from around the discharge hose. Some water will drain out so have towel handy.
5) Dishwasher will need to be pulled out from its built-in area in order to feed the old discharge hose out and the new one in. MAKE SURE THAT THERE IS ENOUGH PLAY IN THE ELECTRICAL WIRES AND THE INPUT WATER LINE TO THE DISHWASHER TO ALLOW IT TO BE PULLED OUT.
6) Loosen, all the way, the white plastic locking arm that clamps the pump housing. It clamps on a white corrugated plastic piece.
7) Remove the spindle arm inside the washer by unscrewing the "tower" piece.
8) Remove the screws from the pump housing on the inside of the washer.
9) Lift the pump housing carefully and remove the rubber gasket from around the housing. There is enough play to remove the gasket and put the new one on.
10) Clean the area around the housing so that the new gasket seats properly.
11) The new gasket will have to be installed before re-installing the discharge hose.
12) Re-install screws in pump housing.
13) Re-install the spindle arm.
14) Tighten the white plastic locking arm underneath the washer that locks down the pump housing.
15) The new discharge hose can now be reconnected between the sink drain and the dishwasher.
16) Dishwasher can now be put back into its place.
17) Before closing up the bottom plate of the dishwasher, it should be run and checked for leaks before finally closing up. My advice - let it stand overnight before checking for leaks. after running.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Mark from Mansfield, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
WPY913158
Drain hose leaked
First I had to unhook the electric, water line and drain hose. Then slide out the dishwasher. Took several days to find the drain hose - local stores only carried a 6 ft hose and I needed a 7 ft. Once I found it online, purchased it and recieved it I put it all back together and all is good.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Jay from Victoria, TX
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
WPY913158, WP910934, 902883, 902882, WP912510, WP616099
Unit had shaft seal leak.
After shutting off power and water to the unit, I disconnected the water supply line using a Crescent wrench and a pair of channellock pliers to support the solenoid.
I then disconnected the power at the junction box and the drain and circulate lines and clamps.
Then unlatched the retaining ring under the unit and lifted the pump assembly out.
Using the detail drawing from the web site I disassembled the pump assembly and laid out the parts in order of removal.
I then reassembled the pump assembly in reverse order replacing the worn parts with the new parts purchased from PartSelect.
I then reassembled the unit in reverse order checking for leaks as I went along.
The part worked great and my friend's dishwasher works beautifully.
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Billy from San Antonio, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WPY913158
Leaking hose. Water coming out from under washer.
Turned off power. Removed lower, two panels. Turned power back on and started dishwasher. Saw leak from 7' drain hose. Turned off power, disconnected hose, ordered new hose, installed on washer and routed back to garbage disposal. Turned on power, checked for leaks (none) and replaced 2 front, lower panels.
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
DAVID from BRIGHTON, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WPY913158
I had a water leak under the dishwasher, after looking underneath i found a drain hose ha split open.
all I had to do is remove 2 hose clamps, swap the old hose with the new one and I was done!
1 person found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
1 Review
1
out of 5
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11757610
Manufacturer Part Number: WPY913158
Brand
Model Number
Description
Crosley
CDU20J
Dishwasher
Crosley
CDU250B
Dishwasher
Crosley
CDU250V
Dishwasher
Crosley
CDU2J
Dishwasher
Crosley
CDU400B
Dishwasher - Undercounter
Crosley
CDU450B
Dishwasher
Crosley
CDU450V
Dishwasher
Crosley
CDU5J
Dishwasher
Crosley
CDU5JV
Dishwasher
Crosley
CDU600B
Dishwasher
Crosley
CDU600V
Dishwasher
Crosley
CDU8000B
Dishwasher
Crosley
CDU8000V
Dishwasher
Crosley
CDU8J
Dishwasher
Magic Chef
DU2000B
Dishwasher
Magic Chef
DU2000B-C
Dishwasher
Magic Chef
DU2000V
Dishwasher
Magic Chef
DU2000V-C
Dishwasher
Magic Chef
DU2000W
Dishwasher
Magic Chef
DU20J
Dishwasher
Magic Chef
DU20JV
Dishwasher
Magic Chef
DU2100B
Dishwasher
Magic Chef
DU2500B
Dishwasher
Magic Chef
DU2500V
Dishwasher
Magic Chef
DU2J
Dishwasher
Magic Chef
DU2J-C
Dishwasher
Magic Chef
DU2J3
Dishwasher
Magic Chef
DU2J3B
Dishwasher
Magic Chef
DU2J3V
Dishwasher
Magic Chef
DU2JB
Dishwasher