Surface Burner Valve - 16K - Left Front & Right Front Specifications
This is a surface burner valve for the left front and right front of your range. Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion. The valve monitors and controlsl the gas flow to the surface burner. It is roughly 3 inches long, 1.5 inches high, and about an inch wide. You should consider changing this part if your current one has seized and your range will not start.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid.
Part# WPW10206288 replaces these:
AP6017058, W10206288, WPW10206288VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
4.5
Filter By Rating:
5 Stars
14
4 Stars
3
3 Stars
1
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul M - October 20, 2023
Verified Purchase
Perfect match
The part fit my Maytag range perfectly. It was easy to install, and now it works as good as new!
★★★★★
★★★★★
Jeffrey P - January 12, 2023
Verified Purchase
I’m a stove repairman now!!!
I’m actually a CPA, but I fixed my stove with this part and the helpful videos. Great site, great products. Thank you so much!!!!
★★★★★
★★★★★
WILLIAM H - December 1, 2022
Verified Purchase
Easy as pie
My biggest concern was pulling the stove out to turn off the gas. The fact that it's been in service 10 yrs, we had to do a bit of cleaning as well. The easy part was replacing the valve, and the videos were very helpful.
★★★★★
★★★★★
Laurie G - November 20, 2021
Verified Purchase
Exactly the right part and well defined instruction
I was able to fix my own burners - the two most used went within a week or so of each other. They probably just needed to be cleaned but when one just stayed on I used pliers to try to turn it off and bent it. Great experience.
★★★★★
★★★★★
Brett G - October 1, 2021
Verified Purchase
part fit and works great
The part was an easy install and it works great
★★★★★
★★★★★
Wynona M - September 2, 2021
Verified Purchase
Surface Burner Valve
Easy ordering process and delivery service was fast. Thanks so much.
★★★★★
★★★★★
Paula L - May 19, 2021
Verified Purchase
Easy Repair
The part came really fast and my husband put it on and it works perfect now.
★★★★★
★★★★★
Blake W - November 17, 2020
Verified Purchase
Perfect replacement
Great part and perfect replacement for my stove.
★★★★★
★★★★★
Pam B - October 26, 2020
Verified Purchase
easy repair
The part was in good condition when it arrived and my stove it back in working condition. Shipping was delayed a little
★★★★★
★★★★★
Brent E - May 13, 2020
Verified Purchase
Excellent Part
Excellent part. Same high quality as original part. Easy to install. Highly recommend for those who are interested in repairing their own stove.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burner valve was seized
Lock the oven/stove controls by holding the START button for five seconds. This shuts off gas to the valve. Remove the knobs from the front of the stove using philips screwdriver. Undo the six screws that hold on the front bezel and remove to find the valve. Unscrew the top bracket using philps screwdriver. disconnect the valve using
... Read more a wrench (I think it was 12mm). Compare the valve to the new one. Installation is reverse. Press the START button for five seconds to unlock the oven/stove. Test fire the burner. Cook a batch of chili.
Read less
Steve from Tracy, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
75 of 85 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dajuana
March 6, 2019
Surface burner valve -- does the 16k or 5k or fish valve restrict the amount of gas to a certain burner?
For model number mgt8885xs00
Hello Dajuana, thank you for your question. Yes, there are different burner valves for the different burners. The valve part number WPW10206287 is the valve for the (LEFT & RIGHT REAR), WPW10206288 is the valve for the (LEFT & RIGHT FRONT), and WPW10298678 is for the center burner. The valves open and close to allow more or less gas to the burners. I hope this helps!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Kathy
September 11, 2019
This is a Whirlpool 6.0 cu ft range that i purchased from sears outlet. It had been reconditioned. I cannot find the model number on the stove itself but this is the model number on the paperwork. Unfortunately, now i see there should be another number at the end ranging from 0 on up to 7. I need a gas burner valve for the left front burner which is a fast burner. I don't want to order the incorrect one but i see you have the same part number for the left and right on the model with 0 at the end (which i thought may be the right one since mine has no number at all on the invoice). I can see a number on the valve itself while it is still in place but i can't quite read it and i don't really want to dismantle before i have the part. Would the left and right valve be the same part if the left is a fast burner and the right is not? I assumed not but maybe i'm wrong. It is 6 cu ft, double oven with accubake system stainless steel and was sears item #61383, if that helps.
For model number WGG555SOBS
Hello Kathy, thank you for your question. The part number W10206287 is the (LEFT REAR) valve, the LEFT FRONT, RIGHT FRONT & RIGHT REAR is part number W10206288. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Albert
August 13, 2021
Hi, i have a KitchenAid kdrs505xss03 stove and the right front stove knob became very tight and eventually seized. Is the correct part to replace wpw10206288? Thak you for your help
For model number KDRS505XSS03
Hi Albert,
Thank you for your question. Yes, this would be the correct burner valve for the right front burner. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dajuana
March 6, 2019
You messaged me the info i asked about the surface burner valves but not sure why is it showing 3 different part name and numbers like, both front valves, 5k , and a fish valve.Will a Hotpoint or GE valves fit my Maytag, they look identical to it but much cheaper.
For model number mgt8885xs00
Hello Dajuana, thank you for your question. Hotpoint and GE parts will not work on your unit. You will have to order the parts that are listed for your specific unit and the burners they control. There are specific valves for specific burners. If you try to use a cheaper valve that is not listed as compatible with that burner you will have issues with the flame, amount of gas, etc. If you need a valve for the Left front, you have to order the Left front burner valve. If you need the fish valve (center valve) you have to order the valve that the manufacturer recommends. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Douglas
February 17, 2020
I have a Maytag gas range and the right front knob broke off so i need a front control burner valve for the front right side of my Maytag gas range.
For model number MGR7662WS
Hello and thank you for writing.
Right front knob black PS11750184, white PS11750183, bisque PS12348921.Burner valve right front PS11751788. We hope this helps. Please contact us anytime if you require further assistance.
Accusimmer (far left) knob will not turn. Therefore cannot turn on the left back burner in order to use it.
For model number GGG388LXS02
Hello Kathy and thank you for writing. We suggest replacing the knob. The part number is W10177201. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
October 1, 2019
The back left burner does not work. I cannot turn it on using the far left knob. The knob is not broken. I do not need to replace the knob. What else can be the problem?????
For model number GGG388LXS02
Hello Kathy, thank you for inquiring. You will want to consider either the Surface Burner Valve part number PS11750352, or the Burner Head part number PS11754341 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
October 9, 2019
I can find the part number for both the front and rear burner valves, but not the center burner. Is it the same part number as the front or rear valves?
For model number MGT8775XS01
Hi Michael,
Thank you for your question. The part number listed under your model number for the center burner valve is PS11752363. I hope this helps. Thank you and have a great day!
I have a dual fuel KitchenAid range and need a front surface valve. I just wanted to check that I’m ordering the right part?
For model number KDRS505X
Hi Laurie, thank you for the question. Yes, this is the compatible surface burner valve for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jenna
December 26, 2019
Will this burner valve be the correct replacement if one of the burners gets gas but does not trigger the ignitor?
For model number KGRS505XSS04
Hi Jenna,
Thank you for your question. If one of the burners is not lighting, this burner valve may help, but it sounds like you will need to replace the wiring harness, part number PS11750278. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
