
Burner Valve - Left and Right Rear
$
127.93
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS11750352
Manufacturer Part Number WPW10206287
Manufactured by
Whirlpool
You May Also Need?
Product Description
Burner Valve - Left and Right Rear Specifications
Sold individually. This valve is for the right rear and left rear burners.

How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid.
Part# WPW10206287 replaces these:
AP6017057, W10206287
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lana
December 19, 2019
It is confusing. Is this price for the left and right rear valves, or for the right rear or left rear? If I need left and right rear to replace, will this purchase include two valves?
For model number KGRS505XSS04

Hi Lana,
Thank you for your question. This part can be used for both the left and right rear valves. If you need valves for both the left and right rear, you will need to purchase 2 valves. We hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry
November 9, 2019
Why does a stove gas valve (Maytag gas stove) all of a sudden stop functioning?. it will not turn/twist. second time this has happened. $158 cdn after shipping & tax. bummer.
For model number MGT8885XS03

Hi Jerry, impossible to say, it could just be normal wear and tear. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gas valve to grill burner locked closed.
1. Pulled range out from its cabinet setting and turned off the gas and unplugged the electric cord. 2. Removed all knobs (and soft pads) to burners. 3. Removed curved cover that covers the burners gas valves, gas manifold and igniter harness. 4. Removed a part that could be referred to as a flange or riser that is attached to the top of the range front at the burner level which the top of the curved piece is attached to. 5.The igniter attachments to the gas valves come off by pulling them away from the valve. I pulled away the one for the grill. 6. With these parts removed, eye sight and 1/2" open end wrench access is given to where the gas valve is attached to the burner gas line. 7. Disconnected the valve from the burner line. 8.Removed the bracket that holds the valve in place, thus removing the valve. 9. Installed new valve and bracket and attached valve to burner line. 10. Reattached the igniter part to the valve, then attached the flange (#4), then the curved cover, then the burner knobs (and soft pads). 11.Reconnected the electric cord and opened the gas valve. 12 Pushed the range back into its cabinet place and pushed the 'Cancel:' mark as directed by the digital read-out on the range's back riser control panel. Checked for gas leak. None. It took a bit of scrutiny to see what to remove and in what sequence.
-
John from BEAUMONT, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right front burner would not turn.
This is the second time had to change burner on this range. Last time was the left front. Since I had done it before knew better about being careful of the wiring. Last time sliced it and had to repair it. Also last time had to have a neighbor unscrew old knob. This time had no problem unscrewing the knob. I did have to adjust the know to be align properly. Also forgot to slip to bottom clamp over the first time and again had to reassemble. Once I got it assembled correctly no problems, works great. I had ordered the wiring harness that I had sliced but it was still intact so saved it for another time.
Other Parts Used:
-
Mary from BALTIMORE, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench (Adjustable)
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Stephen C - August 27, 2022

Great part - worked as expected.
No problems with installation.
Henry M - October 1, 2020

Burner calve
Quick delivery and quality product
JAMES W - June 12, 2020

Exactly what I needed!
Installation was very easy.
John S - June 3, 2020

Happy ??
Salesman was great knowledgeable friendly and extremely helpful
Donald L - August 4, 2018

WPW10206287 burner valve
Right part for a quick and easy fix
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750352
Manufacturer Part Number: WPW10206287
Manufacturer Part Number: WPW10206287
Brand
Model Number
Description
