Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The door spring retainer is used in dishwashers. It attaches and holds the door spring to the support frame. If your dishwashers door keeps crashing, or both the door and dish rack are falling apart, then replacing the door spring retainer, which provides more flexibility, could be the solution to your symptoms. Before starting this project make sure to unplug the dishwasher as well as shut off the water supply before installing the spring retainer. Tools are not needed for this easy repair. Refer to the manufacturers installation instructions for best results and accuracy.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your Maytag Dishwasher Door Spring Linkage
Troubleshooting
This part fixes the following symptoms:
Door latch failure
Door won’t close
Leaking
This part works with the following products:
Dishwasher
Part# WP912653 replaces these:
AP6013630, 9-12653, 912653
Customer Reviews
Average Rating:
★★★★★
★★★★★
18 Reviews
4.9
Filter By Rating:
5 Stars
17
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George E - July 21, 2019
Verified Purchase
Great Part - Worked As Expected
Part arrived and was as advertised.
★★★★★
★★★★★
Greg S - February 9, 2019
Verified Purchase
Great job
Thanks for fast service I was very happy that this part was still available as it was a older dishwasher and the customer was on a fixed income and could not afford a new dishwasher.
★★★★★
★★★★★
Fred W - May 12, 2020
Verified Purchase
Easy repair!
The part was exactly like the original one and was a easy fix!
★★★★★
★★★★★
Robert S - April 4, 2018
Verified Purchase
fast delivery good fix
fast delivery easy fix
★★★★★
★★★★★
Alex M - October 2, 2018
Verified Purchase
worked as hoped.....
part worked great....took me longer to pull out the dishwasher than to replace the part.....
★★★★★
★★★★★
Paul H - April 26, 2019
Verified Purchase
it work perfect
it is now working
★★★★★
★★★★★
Paul N - December 19, 2020
Verified Purchase
quick and easy
timely response and easy replacement.
★★★★★
★★★★★
Mark V - July 24, 2018
Verified Purchase
Perfect replacement for the original part
Worked perfectly on the door of a very old Maytag dishwasher. The original parts wore out and broke into pieces. Need 2 parts to fix the door. Replacement parts were an exact match to the original.
★★★★★
★★★★★
Marc M - November 27, 2018
Verified Purchase
part fit and worked as good as the original
part where delivered quickly and worked as good as the original
★★★★★
★★★★★
Marco A - September 20, 2018
Verified Purchase
No brainer
watch the video
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 27 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
DISHWASHER DOOR WOULD DROP IF OPENED AND NOT HELD ONTO
***BEFORE STARTING BE SURE TO TURN OFF THE POWER!! THE SPRING TENSION WAS GONE THAT WOULD KEEP THE DOOR FROM FALLING. KEEP IN MIND THERE IS A DOOR SPRING AND LINKAGE ON BOTH SIDES OF THE DOOR. SO BUY 2 OF EACH AND RETURN THE ONES YOU DON'T USE. IF YOU REPLACE THE LINKAGE ON ONE SIDE YOU MIGHT AS WELL CHANGE THE OTHER ONE SINCE IT'S O
... Read moreNLY A SMALL PLASTIC PIECE. FOR ME THE SPRING WAS GOOD - ONLY REPLACED THE LINKAGE. REMOVED THE PANEL AT THE BOTTOM AND THE 2 SCREWS THAT HELD IT UNDER THE COUNTER TOP. I DIDN'T DISCONNECT THE WATER BUT WAS ABLE TO PULL THE UNIT OUT JUST ENOUGH (10 INCHES OR SO) TO GET TO THE SPRING. HELD IT IN PLACE WITH THE VISE GRIP SO IT DIDN'T FALL BEHIND THE UNIT. FYI - YOU MIGHT HAVE TO ADJUST THE TENSIONER ON THE BOTTOM IF YOUR SPRING TOOK A WALK WHEN THE LINKAGE BROKE. BE CAREFUL PUSHING THE UNIT BACK UNDER THE COUNTER. TOOK ME ABOUT AN HOUR AND SAVED SOME MONEY
I took off bottom front and kick plate. Retrieved the spring which had flown to the rear of the unit. Cannot pull unit out because the trim piece on the counter top was put in after the unit was screwed to the underside of the counter. So... I noticed that you could move the plate the bottom of the spring hooked into by unscrewing a lo
... Read moreng quarter inch hex head bolt and bring the plate forward where I could hook the bottom of the spring into the plate. I had first hung the door spring linkage on the door (looked at the opposite side to see how it was arranged) then onto the top of the spring. The difficult part was keeping the bottom of the spring in its hole in the plate while moving the plate back in place. After I got it past the flange where the bolt screwed in, I screwed the bolt in and pulled the plate back to match the opposite side distance which put tension on the spring. The door now works. I am fortunate to have my husband's tools available.
Read less
Mary E from SILT, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The plastic linkage that connect the spring to the door broke
The time to hook up the spring was a minute or two. I simply attached the linkage to the door and then attached the spring to the linkage.The extra time in the repair was re-attaching the cover.
William from MORGANVILLE, NJ
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door spring linkage
On my dishwasher, one linkage broke, making the door feel heavy to raise and lower. Because there are two door springs, one on either side, I decided to replace both plastic linkages even though only one broke, because it would only be a matter of time before the other plastic link failed and I would have to do the repair all over again.
... Read moreRemove the 2-piece panel at the bottom front of the dishwasher. It's held on by four hex-head screws which also have slots for a Philips screwdriver. The springs can now be seen on both sides of the door, at the bottom. Remove two screws that anchor the dishwasher to the underside of the counter. Gently ease the dishwasher a short distance out from its under-counter recess, just far enough to gain access to the springs. Make sure not to put any excessive strain on the water inlet tubing, drain hose or electric power cable by pulling the dishwasher out too far. Close and latch the dishwasher door so that the springs are in minimum tension. Note the slot that the linkages hook into on the door levers. Hook the small end of the spring into the hole in the metal bracket. Slide the linkage onto the other end of the spring. Stretch the spring to slide the free end of the linkage onto the door lever and into the appropriate slot. Push the dishwasher back into its recess and replace all screws and panels.
Read less
Brian from SAN DIEGO, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door spring linkage, a plastic part, broke so the door spring didn't hold the door upright.
Took off the lower front plastic piece and unscrewed the side panel to snap the new part in place then attached the spring to it.
James from BETTERTON, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door was slamming down, heavy to close
Unscrewed bottom panel. I could see right spring in proper position, left spring lying on floor, and broken linkage. Ordered part from partselect.com. To install, had to unscrew dishwasher attachment to counter, loosen leveling legs, pull it out a bit, then could replace linkage and reattach spring, retighten leveling legs, then push b
... Read moreack in and replace screws and bottom panel.
Read less
David from Philadelphia, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would flop open
removed 4 screws on lower plate, 2 screws on dishwasher tabs, slid unit out 6 inches, replaced spring linkage
bill from lago vista, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishwasher didnt stay running/ door falls to ground
Removed the inside door cover.Next remove door handle/latch/switch assy. Replace assy, replace covers. Done. Door spring linkage, pull out dishwasher to access sides. Insert linkage into spring hook, and install hook onto dishwasher bracket. Or just watch the video.
Pulled D/W out about 1/4 of the way. Kept door latched at all times. Replaced plastic links with new ones. (one was broken but replace in pairs!). Attached springs. No tools required for this. Pushed D/W back in place and secured screws to top. Only tool used was a nut driver to remove the screws holding the D/W to the counter. Total
... Read more time 7 minutes.
Read less
Basil from St. Charles, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door springs dissconnected broken links
Removed 2 each screws from counter top. Pulled washer out 1'. Installed springs and linkage by hand with door closed. Push washer back reinstalled 2 screws.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
July 2, 2019
How do you install a door spring in a portable model?
For model number DWC4910AAW
Hi Frank,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the spring. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ralph
November 29, 2017
My dishwasher is not working. I have to push the door in and hold it for it to work. Can you tell me what the problem could be and if it can be fixed?
For model number MDB4000AWB
Hello Ralph,
Thanks for your question. You may need to replace the door latch assembly, part number PS2099645, to ensure the door closes properly and allow the dishwasher to start.
I hope this helps.
