11744110-1-M-Whirlpool-WP74005890-Spark Igniter Set

( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Spark Igniter Set

★★★★★

5 Reviews

Rated by 4 customers

Really Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$ 78.51

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11744110

Manufacturer Part Number WP74005890

Manufactured by Whirlpool

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description

Spark Igniter Set Specifications

This part provides the spark to the burners.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will Not Start | Gas igniter glows | but will not light

This part works with the following products:

Range, Cooktop.

This part works with the following products:

Jenn-Air.

Part# WP74005890 replaces these:

AP6010920, 74005890, 74006098, 7432P120-60

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.

< Prev
1
Next >

Sort by:

Maryann

November 11, 2017

All four of our burners won't light and there is no clicking. The gas supply is good and they are not clogged. We can light them with a match. What hat do we need to replace

For model number JDS9860AAP

Hi MaryAnn, Thank you for the question. I suggest replacing the Ignition Switch Harness Assembly, PartSelect Number PS11744350.This harness has all 4 burner ignition switches that sit on the burner valves. If the harness is defective or one switch, the full assembly can stop operating since they are all attached to the same harness.Hope this helps!

6 people found this helpful.

Was this helpful?

Thank you for voting!

Jim

May 3, 2019

Two sealed burners on stove -- one (2elements) no spark. Switched sides still no spark. Changed burner igniter still no spark. Lights from match. Is spark igniter set the issue?

For model number JGA8100ADB

Hello Jim, Thank you for the question. Yes, if changing the burner igniter did not fix the issue the Spark Igniter Set should fix the igniting problem. Hope this helps!

6 people found this helpful.

Was this helpful?

Thank you for voting!

Paul

April 27, 2018

Left side, griddle cartridge: Front burner ignites but will not adjust Flame size; rear burner clicks(sparks?) but does not ignite.

For model number JGA8150ADB

Hi Paul, Thank you for your question. Based on what you described, you will need to check the spark electrode and the spark igniter kit. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?

Thank you for voting!

Nancy

November 19, 2018

We bought a home and the grill does not light. The part that we need (my husband thinks) is either part 2 or 3 from your diagram. Do you have these two parts that we can buy? Thanks for any help! Nancy and george in arizona

For model number JGD8130ADW

Hi Nancy, Thank you for your question. Yes, these 2 parts are available. Part number 2 in the diagram is the e-burner igniter, part number PS11744119, and part number 3 in the diagram is the igniter assembly, part number PS11744120. I hope this helps. Thank you and have a great day!

Was this helpful?

Thank you for voting!

Vivian

December 10, 2018

The back right burner will click but not light.

For model number JGA8100adb

Hello Vivian, Thank you for the question. I suggest testing or replacing the Top Burner Igniter, PartSelect Number PS2082000 for the burner not lighting. Hope this helps, good luck with this repair!

Was this helpful?

Thank you for voting!

Related Parts:

Top Burner Igniter

$33.12

Jim

April 17, 2019

Back right burner does not spark but does have gas flow and can be lit with a match. The 3 others all spark regardless of burner knob used. I replaced the top burner igniter but it still does not work. Tried switching left and right burner assemblies and the same burner still does not work. Any ideas what I need to replace? Thanks.

For model number JGD8130ADB

Hello Jim, thank you for inquiring. For this symptom you will want to replace either the Spark Module part PS2094592, the Top Burner Igniter part PS2082000, or the Spark Igniter Set part PS11744110. We hope this helps.

Was this helpful?

Thank you for voting!

Colleen

July 20, 2021

My 2 left burners light fine. The two on the right don't. I have to use a match. I can hear the clicking but no spark. What part would i need?

For model number JGD8348BDP

Hi Colleen, Thank you for your question. If the burners are clicking, but they are not lighting, check to see if the burner heads are out of alignment. If they are, they will not light. Reposition them if they are not aligned correctly. If you have recently cleaned the stovetop or if water has spilled, you will need to wait until the the burners have dried before using them. If this is not the issue, the you will need to check the spark igniters and the spark module. We hope this helps! Good luck with the repair!

Was this helpful?

Thank you for voting!

Related Parts:

Spark Module - Surface Burners

$56.00

Top Burner Igniter

$33.12

Gil

April 14, 2018

All four of our burners will not light and there is no clicking. The gas supply is good and they are not clogged. We can light them with a match. What do we need to replace?

For model number JDS9860AAW

Hello Gil, Thanks for your question. This is most commonly due to the spark igniter switches themselves. You may want to test them with a multimeter to see if they have continuity in the light position. Replace them if they do not show continuity. I hope this helps.

Was this helpful?

Thank you for voting!

Related Parts:

Top Burner Igniter

$33.12

< Prev
1
Next >

Customer Repair Stories

Average Repair Rating: 4.1 / 5.0, 4 reviews. What's this?

< Prev
1
Next >

Sort by:

Spark igniter out

The primary spark igniters failed. Take the (small) screws out of the sides and bottom of the pan. The front of the pan must be removed from the bottom, because the front burner igniter wire is too short to allow reassembly once attached. Only other is the screws for the attachment bracket are larger than the holes. Suggest routing them out slightly to get them to grip the screws. Otherwise it is quite simple. Pull the connections with a needlenose and press the new wire connection back on firmly. Screw the screws back in the pan.

Patricia from Overland park, KS
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

18 of 26 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Gas Burner Cartridge not Sparking to Light.

This cartridge fits my JennAir Downdraft Slide In Rage, part No. JDS9865BDP. The burner cartridge replaces a downdraft cooking grill module that comes with the original stove/Oven.
The spark quit on the cartridge side. I re-inserted the original cooking grill, and it lit fine. There are two components to look at. The sparker, and the burner igniter (one per each burner). Since both failed to light, I ordered the spark controller.
PartSelect has a video on how to test for failure, but I couldn't find that again.
Two screws mount the controller, two wires re-connected. and works perfect.

HARRY from BEND, OR
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No spark on right 2 burners, won't ignite

Remove the 2 burner assembly by gently lifting the rear burner and pull towards the back of the stove and the entire 2 burner assembly will slide out. Turn assembly up side down, remove all the screw on the cover with a philip screwdriver and remove cover. Once opened, you will see the ignighter, remove the 2 screws holding it in place, remove and replace the ignighter and secure with two screws. Follow the 2 lead wires and remove and replace with the new wires, simply pull off old and push on new wires. Replace the cover and all the screws, slide it back onto the stove and you will have ignition! Simple install, takes about 20-30 minures. If both burners are out, this is probably the problem. If only 1 burner is out, you probably need to replace the stove burner spark.

John from TAMPA, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Top gas burners would not ignite

Removed Stove cartridge from stove-top.

Unfastened bottom screws, I recall 6.

Removed cover.

Removed two screws to igniter.

Used needle nose pliers to remove connectors x 2.

Had to drill to enlarge the mounting screws to new ignitor, then screwed it in place

Connected the two wires to each igniter.

Replaced cover n screws.
Reinstalled cartridge.

Bingo

Other Parts Used:

Top Burner Igniter

Robert from SHORELINE, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

< Prev
1
Next >

Customer Reviews

Average Rating:

★★★★★

5 Reviews

4.8

Filter By Rating:

5 Stars

4
4 Stars

1
3 Stars

0
2 Stars

0
1 Star

0

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

From ordering to installation - a simple process

Parts Select did a good job helping me to identify the right part. Shipping was fast and the part arrived in first class condition. Installation took about 15 minutes.

★★★★★

Verified Purchase

Great Part and easy repair

The part came timely. Was easy to replace and worked like a charm.

★★★★★

Verified Purchase

Just what I needed, thanks, 10 minutes to install!!!

20 yrs ago my JennAire was a great stove, now I might move up to thermador ( if I had $6,000 ), but now after spending $40.00 my JennAire is great again!

★★★★★

Verified Purchase

Fixed my burner issue!

The part was what I need to get my burners working again. The part was easy to replace and I received it in a timely manner.

★★★★★

Verified Purchase

Easy repair

Parts Came as ordered and no problems after installing.

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11744110
Manufacturer Part Number: WP74005890

Jenn-Air

JDS9860AAB

Range - Slide-in, Electric-Gas Combo

Jenn-Air

JDS9860AAP

Range - Slide-in, Electric-Gas Combo

Jenn-Air

JDS9860AAW

Range - Slide-in, Electric-Gas Combo

Jenn-Air

JDS9860ACB

Range

Jenn-Air

JDS9860ACP

Range - Slide-in, Electric-Gas Combo

Jenn-Air

JDS9860ACW

Range

Jenn-Air

JDS9860BCP

Range

Jenn-Air

JDS9860CDB00

Range - 30" MODULAR GAS DOWNDRAFT RANGE

Jenn-Air

JDS9860CDB01

Range - 30" MODULAR GAS DOWNDRAFT RANGE

Jenn-Air

JDS9860CDS00

Range - 30" MODULAR GAS DOWNDRAFT RANGE

Jenn-Air

JDS9860CDW00

Range - 30" MODULAR GAS DOWNDRAFT RANGE

Jenn-Air

JDS9860CDW01

Range - 30" MODULAR GAS DOWNDRAFT RANGE

Jenn-Air

JDS9861AAP

Range

Jenn-Air

JGA8100ADB

Cooktop

Jenn-Air

JGA8100ADB11

Range - CONVENT GAS CARTRIDGE

Jenn-Air

JGA8100ADW

Range

Jenn-Air

JGA8100ADW11

Range - CONVENT GAS CARTRIDGE

Jenn-Air

JGA8150ADB12

Range - CONVENT GAS CARTRIDGE

Jenn-Air

JGA8150ADW12

Range - CONVENT GAS CARTRIDGE

Jenn-Air

JGA9150ADP12

Range - CONVENT GAS CARTRIDGE

Jenn-Air

JGD8130ADB

Cooktop

Jenn-Air

JGD8130ADB20