Refrigerator Defrost Timer 120v 60hz WP67001036

Hi Walt, Thank you for your inquiry. I would suggest testing both the run capacitor and the start relay on your appliance. Both of those parts are directly attached to your compressor. Disconnect power to your appliance and the remove those parts. Test them both with a multi-meter to see if they are still functioning. If they are both still working, you may have to consider contacting a certified technician to come in and have a look at your appliance. Good luck with your repair.

Hello John, thank you for your question. We find that when a fridge is running to cold, it may be the Defrost Thermostat Kit PS2003451 that may be the issue. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hello Salvador, Thank you for your inquiry. I would check your defrost timer, defrost heater and defrost thermostat. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Good Luck with your repair!

Hello Rob, Thank you for the question. Here is a link to a page on our site for testing Defrost Timers. Hope this helps! https://www.partselect.ca/Refrigerator+test-defrost-timer+repair.htm

Hello and thank you for writing. You would have to test both parts to establish which one is defective. here is the link for testing the timer PS11743439 : https://www.partselect.ca/Refrigerator+test-defrost-timer+repair.htm To test the thermostat PS 2003451 you do need a multimeter and do the following: Set the function selector switch on the digital multimeter to its R x 1 scale. Plug the red test lead into the red jack, marked "VmA" -- volts milliamperes. Plug the black test lead into the blackjack marked "COM." Attach the test probes to the terminals on the thermostat. The LCD on the meter will display “0.000” if the cold thermostat is in the closed position. The defrost thermostat should be in the closed position when cold. Check to be sure the thermostat is opening at the correct temperature by placing it in water and slowly heating the water. Defrost thermostats are designed to open between 40 degrees and 90 degrees Fahrenheit. The preset temperature is stamped on the thermostat. When the thermostat opens, the meter's LCD will display an “O.L.,” indicating no continuity through the bi-metallic switch contacts inside the defrost thermostat. If the thermostat does not display an “0.000” when cold or an “O.L.” when hot, the thermostat is bad and needs to be replaced. We hope this helps. Please contact us anytime if you require further assistance.

Hi Rich, thank you for reaching out. Usually, after every 8 hours of compressor run time, the defrost timer, part number PS11743439, activates the electric defrost heater. After 33 minutes of defrost cycle time, the timer restores the circuit to the compressor. We hope this information helps!