Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dan B - August 12, 2020
Verified Purchase
easy repair (youtube), worked great
Brand new in a box, and has replaced the OE 15 year old Kitchenaid switch. Dryer now works flawlessly and it was only a 20 min job, including getting the dryer back in place.
★★★★★
★★★★★
Scott R - February 27, 2025
Verified Purchase
Perfect
Received fairly quickly.. took about 15 minutes to swap out the timer... Worked perfectly. Was great to find the right part, get it quickly and fix our problem easily. I'll be back again!
★★★★★
★★★★★
Fred L - February 28, 2018
Verified Purchase
Whirlpool Timer control PS11742163
My dryer was operating intermittently and for a while it would run for a short time after wiggling the timer knob. I ordered it on a Sunday with a "live body" who was extremely helpful. My part arrived on Wednesday and installed simply within 30 minutes. It now operates as good as new. Part Select will be my go to supplier when my next part need pops up.
★★★★★
★★★★★
Frank F - April 15, 2018
Verified Purchase
Very easy repair
Dryer is now working! Fixed the starting up issue and now runs through its cycles properly.
★★★★★
★★★★★
Robin B - April 7, 2021
Verified Purchase
Received quickly - Works as expected
I've never done these types of repairs, but decided to watch a video and then ordered this part as it appeared to be the best priced one I could find. For the most part I had no issues installing it, and so far the dryer hasn't caught the house on fire so clearly it got installed properly despite this not being my expertise. So far, so good. I would definitely buy other products from this company as I received what I ordered and quickly. -- The mechanically challenged. :-)
★★★★★
★★★★★
John P - February 12, 2026
Verified Purchase
Great replacement part
Easy to change part with clear pin markings. One and done.
★★★★★
★★★★★
Randy S - April 2, 2019
Verified Purchase
Dyer timer
Same part and a video on replacement procedures. Worked like new, wife is impressed. Saved a bunch doing it myself
★★★★★
★★★★★
Howard P - May 14, 2019
Verified Purchase
Quick and easy repair
I reviewed what other people had done to replace the timer and removed one wire at a time and in 10 minutes it was in and working great.
< Prev
1
Next >
Installation Instructions
Average Repair Rating: 4.1 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The timer went out and the repair people wanted $350
I took off the back panel, disconnected 7 wires, while using needle-nose pliers with minimal force, and installed the new unit in less than 10 minutes. This saved me almost $200.
JAMES from SAN JOSE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Would Not Shut Off Automatically. Timer Was Not Advancing In Any Position.
Unplugged electrical cord. Disconnected 4'' air vent. Slid dryer out from wall to gain access to back cover of the control panel. Removed cover (six screws) with 1/4" nut driver. Removed knob from timer (slides off and on). Looking at rear of timer, there are two 1/4 " hex head screws that hold timer to mounting plate. Removed
... Read moretimer by removing those screws. Began at a predetermined terminal to remove wires from old timer and place these on the new one. Going counter-clock-wise one wire connection at a time the wire connecters slid off the old and on to the new terminals very easily. Reversed procedure in putting things back together and found that the dryer worked perfectly. Thanks for the video.
Read less
Jesse from Antioch, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not cut off automatically. Timer not functioning
Disconnected dryer from the electric supply. Removed panel at rear of Control Console and loosened the 2 screws fastening the timer to the console. Moved the old timer to left and screwed new timer in place. Because of the number of electrical connections to be re- attached I decided to disconnect the wires from the old tim
... Read moreer one at a time,starting from the left side and moving the terminals directly to the corresponding terminals on the new timer.This sequence ensured that I got each wire on the correct terminal and avoided having a lot of loose wires to choose from. The push-on terminals came off easily and pushed onto the new timer easily. I rescrewed the back-plate to the control console,plugged in the dryer to the mains electrical supply and ran the dryer. It worked beautifully.
Read less
Alfred from Berkeley Heights, NJ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer will not start
One night my wife could not start the Dryer. I took a look at it and realized that the timer still advances, but it will not start.
I called a repair man to take a look at it and he confirmed that it was the timer. He said the total repair will cost me aroun $270.00 Parts and Labor.
I then came online and found p
... Read moreartselect.com. I searched for the model number of the dryer, used the repair man tool and found what I was looking for.
It took me less then 10 minutes to take apart the dryer and replace the new part. I saved over $180.00 on labor.
To install,I unplugged the dryer from the power. I unscrewed the dryer top and pulled it out. I then unscrewed the timer and disconnected the wires and reconnected the wires to the new timer.
Screwed back the timer in place and screwed back the face plate. Plugged in the dryer, selected a timer setting and pressed the start button. My wife thinks I am a hero.
Thank you Partselect for the great service.
Ruby
Read less
Ruby from Dearborn, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
Replacing the part was easy, diagnosing the problem took 5 visits from the repair service and 2 calls to the manufacturer over the course of nearly 2 month. Once I was confident that the problem had been correctly diagnosed, I went online to order the part and installed it myself in less than 15 minutes. The part arrived sooner than ant
... Read moreicipated at a price 33% less than that quoted by the service company.
Read less
Tim from Bethesda, MD
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer never stop
Just change the timer as follow taking off one wire on the old timer and connect to the new one, and do the same thing for all of the wires.This way will be not confuse with the connections.
JAIRO from DELAND, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wouldn't stay running when "start"
Removed nuts from back cover. removed old assembly from the dryer. screwed the new one to the dryer. Pulled wires from the old assembly and replaced them onto the new one (one at a time to assure proper location). Put the cover back on...Plugged the dryer in and whala! I wouldn't have imagined that I could have fixed it myself, but I
... Read moret was easy!
Read less
Jennifer from Aaronsburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer didn't move the dial while drying
Unplug the power cord. Next I removed the 6 screws that held the top back panel in place. Then pull the dial off the timer post. Then unscrew the 2 screws holding the timer in place. At this point it would have been "really easy" to swap the wires from the old timer to the new timer, except the wires that slid onto the posts also had a
... Read more piece that locked them into place. I had to rig a paper clip with a small bend at the end to poke into the hole to release the small metal piece that locked it into place before sliding off the wire. Some were a bit difficult to reach because of the angle of the wire post and what was next to it on the timer. All in all though this phase took less than 15 minutes, so it wasn't too bad. After swapping the wires from the old timer to the new timer, reverse the disassembly procedures to put everything back in place. The new timer works better than my old one before it broke, ensuring my clothes are actually dry when setting it on the sensor-dry setting. And it actually does what it's supposed to when finished drying - that is activate the buzzer, and tumble the clothes every 5 minutes or so to prevent wrinkling.
Read less
Michael P from Flagstaff, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
13 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer had to be manually shut off.
Removed cover, removed each wire tab from the old timer, placed it in the same spot on the new one, put the cover back on.
Patsy from Sulphur Springs, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Morris
October 30, 2019
Dryer comes on with heat but cuts off in a few minutes, try again and it does the same thing. You think the timer is bad?
Hello Morris, thank you for inquiring. The issue may be with the Timer, but you will also want to consider the Moisture Sensor. We will need the model number for your dryer to locate the compatible replacement parts for it. We look forward to hearing back from you!
1 person found this helpful.
Did this question help you?
Thank you for voting!
Delia
November 9, 2019
I have checked all parts and had them tested for my KitchenAid dryer. I took the heating element; dryer thermal fuse; thermal cut off kit; dryer cycling thermostat; thermostat high limit so what else can be wrong with the dryer, either the 220/240 plug or the timer. Does the timer have anything to do with the heat. The dryer is not heating.
For model number KEYS750LQ0
Hello Delia, thank you for your question. The only other part that could be the issue is the temperature selector switch. I would recommend testing the switch and if that part is fine, the timer should be replaced. I hope this helps.
Did this question help you?
Thank you for voting!
Don
April 1, 2018
The dryer comes on but there is no heat. Can you help?
For model number KEYS850GQ0
Hello Don,
Thanks for your question. There are a few different parts you may wish to test with a multimeter for electrical continuity. Test the thermal cut-off kit, the internal-bias thermostat, the heating element connection wire kit, the thermal fuse, and the heating element. You may also want to examine the belt for any signs of wear and tear.
I hope this helps.
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dryer","title":"Dryer","url":"/Dryer-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dryer-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"WP3976570","title":"WP3976570","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
